Engine Photos - help needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

remist17 · 09-08-2010, 03:20 PM

Hi all. Can you post up some engine photos of V8's. I am swapping out a 6 for a 383 stroker. I am not sure how the heater lines, EGR, fuel and cooling lines are run to the 80's engines.

any help is appreciated. I am running a Edelbrock air gap intake, holley 670 avenger.

CaliDude76 · 09-08-2010, 04:18 PM

hope this helps....

I do have some carb pix too, if you want, just let me know.... 4 BBL Q-jet

*nbpro* · 09-08-2010, 05:14 PM

http://67-72chevytrucks.com/vboard/s...ad.php?t=65484

remist17 · 09-12-2010, 02:50 PM

thanks...
I posted another thread but can anyone help me out with mounter mount brakets
I am swapping out a V6 for a V8 in my 1987 R10. I knew the mounts are different so I went to a you pull it and found a 86 that had the 8 cyl brakets. It had a utilty body so I am assuming it was at least a 3/4 ton truck. Came home and the brakets are not even close to matching up to the holes in the frame.

My questions:
1- Is there a difference between 1/2 ton and 3/4 ton engine brakets?
2- Is there mounting holes in the frame for a 8 cyl or do I have to drill
3- Is there a difference between 4x4 and 2x4 brakets?
(the brakets in question are the ones that mount to the frame and cross member)

What am I doing wrong !

Please help!!!

09-08-2010, 03:20 PM	#1
remist17 Registered User Join Date: Jul 2009 Location: PA Posts: 406	Engine Photos - help needed Hi all. Can you post up some engine photos of V8's. I am swapping out a 6 for a 383 stroker. I am not sure how the heater lines, EGR, fuel and cooling lines are run to the 80's engines. any help is appreciated. I am running a Edelbrock air gap intake, holley 670 avenger. __________________ 2013 Chevy Silverado, Z71, 5.3L, 4 door 2005 Chevy Silverado, Z71, 5.3L, 4 door, 3.40 Support the Troops.

09-08-2010, 04:18 PM	#2
CaliDude76 All About the BOWTIE Join Date: May 2010 Location: Los Banos, California Posts: 436	Re: Engine Photos - help needed hope this helps.... I do have some carb pix too, if you want, just let me know.... 4 BBL Q-jet Attached Images __________________ CaliDude76 "... Being "SQUARE".. is where it's at...." Proverbs 15:30 .... "A Cheerful look brings joy to the heart, and good news gives health to the bones..." Be exceedingly blessed today, my friends!... Last edited by CaliDude76; 09-08-2010 at 04:22 PM.

09-08-2010, 05:14 PM	#3
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: Engine Photos - help needed http://67-72chevytrucks.com/vboard/s...ad.php?t=65484

09-12-2010, 02:50 PM	#4
remist17 Registered User Join Date: Jul 2009 Location: PA Posts: 406	Re: Engine Photos - help needed thanks... I posted another thread but can anyone help me out with mounter mount brakets I am swapping out a V6 for a V8 in my 1987 R10. I knew the mounts are different so I went to a you pull it and found a 86 that had the 8 cyl brakets. It had a utilty body so I am assuming it was at least a 3/4 ton truck. Came home and the brakets are not even close to matching up to the holes in the frame. My questions: 1- Is there a difference between 1/2 ton and 3/4 ton engine brakets? 2- Is there mounting holes in the frame for a 8 cyl or do I have to drill 3- Is there a difference between 4x4 and 2x4 brakets? (the brakets in question are the ones that mount to the frame and cross member) What am I doing wrong ! Please help!!! __________________ 2013 Chevy Silverado, Z71, 5.3L, 4 door 2005 Chevy Silverado, Z71, 5.3L, 4 door, 3.40 Support the Troops.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.