NY Many Parts - Tach Dash, Tilt, blazer, suburban parts

[JimmyFloyd]

Ok, fiance got laid off a month or so ago, and I have some extra debt I could do without more than I need these parts. Will accept offers on everything. Can bring some stuff with me to fall carlisle friday only. Must be paid for ahead of time though for it to make the trip and must have a phone number for you. You will get mine once paid.

1) Van Tilt Column. Was told it was rebuilt and it is nice and tight. Automatic column. Has cruise control button on turn signal lever, and the wire to the end of the column. Has the flat connector on it, but includes both sides so you can splice it or make a jumper. Missing the needle that shows which gear. I believe it's already setup for a truck (per PO) $175 plus shipping/bo
















2) 1972 Tach Dash. From a 402 BB auto truck. Was pulled from a running rusted truck by PO. Looks to be in good shape. Woodgrain bezel with a couple small cracks/chips. $225 shipped/bo



More pictures: http://s282.photobucket.com/albums/k...h_Dash_402_V8/

3) Nice straight rust free 67/68 grill with painted hoops and parking lights. Been painted a couple times, but it is in nice shape. I couldn't find any dents on it. Some light surface rust on the bottom panel that connects to the radiator support, but all solid. Comes with latch and support too, and I believe I have painted bezels too. $200/bo plus shipping for everything. More pictures will be added later.







4) Radiator support to fender braces. Good shape. Light surface rust. $25 shipped


5) Single Wall Blazer top dome light harness (inside the top) with lights. No lenses, plate, or body side harness. See picture $25 shipped.


6) Hood Latches. Can't remember the year. $25 shipped each


7) Truck rear wheel splash shields. Not sure if these are re-popped or not. Came off a 71 long bed. Have both sides. Surface rust, no rot, very solid. Will need the bottom corner bent back and bolt removed (I just cut the corner off the quarter since the bolt was stuck.) Did not cut these pieces. $40 plus shipping each, $70 plus together.



8) I believe this is a heat shield. Was removed from the driver's side of a 71 LWB V8 truck. Mounted on one of the Motor mount bolts. $20 shipped.


9) Blazer Hatch Glass. I have two of these. Both have gaskets, but they are old. Windows are uncracked. Will attempt to ship them, and will build a small crate to help insure they get there. $75 for each piece. Buyer will cover crate material costs, insurance, and shipping extra. (one pictured, other is behind the complete hatch)


10) 4 core radiator out of a 72 402 BB Auto truck. In good shape. Was a replacement Radiator back in the day as it has a radiator ship tag on it. Looks to be in good shape. No pictures at the moment. $120/bo. Buyer responsible for Crating cost, shipping and Insurance.

11) Radiator Support brackets. Have a bunch of 3 core and 1 set of 4 core (I think) $18 shipped for a set of 3 core, $35 shipped for the 4 core.


12) Nice CST Black blazer passenger side bucket seat. No rips. Dusty from storage. Scroll seat pattern. Blazer brackets on it, but no floor bracket included. $300/bo. Pictures to come. Pickup preferred, but will consider shipping at buyers expense.

13) Ash trays. Various shapes. $5 plus shipping.




14) Chrome front and rear repop (I think) bumpers new in package. They are new in package and have been in my truck since i bought it. Chrome looked good on the parts I can see. $150 each, $250 for the pair. Shipping will be expensive and is the buyers expense. I believe these were $200 each new according to PO. No pictures yet.

15) 70 3/4 4x4 suburban Front and rear drive shafts. $50 each. Shipping will be pricey.

16) 1970 Suburban/Blazer rear mounted gas tank. Needs to be cleaned out, old gas in it. Varnished some. Comes with an old sender or two that are probably junk. Good neck on it. Will remove the neck and ship that alone. $40. NO shipping on the whole tank.


17) Suburban Gas filler neck - $35 plus shipping


18) Blazer Filler neck. Cut into two pieces. Decent shape

19) Suburban Spare tire will - $80


20) Suburban Rear Splash Shield driver's side - $35 shipped.


21) Decent LWB inner tool box. Need some work, but a good replacement for a driver. Could of cracks and punctures, but overall is solid. $30 plus shipping.




22) 1970 Core Support. Will not ship. Comes with radiator to fender brackets and headlight buckets as pictured. $50


23) 1970 Inner grille. Original. They don't repop these. Two small imperfections, but hidden. $100 plus shipping.


More: http://s282.photobucket.com/albums/k...970InnerGrill/

24) Clearance light covers. $3 each, $13/5, $18/all


25) Good 350 long block, TH350 with fairbanks shift kit, and NP205 from a 70 suburban. No shipping on these. Make offer picked up on any/all of this. (accessories not included)


I have many more parts that I will be going through, as well as some 73+ parts to add over there. Shipping is from 13904, and all shipped prices are for 48 US only. Will ship to canada and other 2 US, but charges might be higher. Shipping on large items will take a little bit of time to get packed up, but buyer will be updated with progress. Can bring some items to Fall Carlisle on friday Oct 1st. Will need to be paid for by paypal GIFT prior, and I will need your full name, phone and address PMed to me. I will call you when I get down there and let you know I am there, and work out a time to meet and get you your parts. I will try you 3 times, once when there, once at lunch time, and once before I leave. If you fail to meet up, it will be up to you to make arrangements to get your parts. I will refund your money after the fact, minus 10% or $20, whichever is less, as I had to haul the parts around, and it reduces the space in the truck for other people's stuff. I will leave parts with people, but I need their Name, Phone number, and Space # to get a hold of them.

Please respond here with offers. Once accepted, we'll take things to PM.

[jaros44sr]

would you consider parting the the cruise control lever, more pics would be great

[JimmyFloyd]

I would if the offer was good. Although I am not sure how I would get the wire out of the column without cutting the connector off of it. I'll get better pictures tonight of it.

[bowtietruknut]

Interested in dash how is the circuit on the back any pictures what's your bottom dollar shipped to 35950 Thanks

[HavinSomeFun]

shipping on the van tilt to 72022

[JimmyFloyd]

looks like shipping should be under $35 to 72022, assuming I can take the levers off for transport, and it weights less than 30 pounds.

And I try and package all my stuff as best as I can. Here is an example of a 66 C50 Grill I am getting ready to box up. Going to get covered in cardboard, and may not look nice on the outside, but secured from drops on the inside. Adding this structure did add $10 to the shipping price, but worth it for the added comfort.

[JimmyFloyd]

There is a link right under the picture of the dask with more detailed pictures, which should show you what you are looking for. Right now I have it listed for what I have been offered for it, but the interested party said they wouldn't have the money for a month or two, so I would like to stick near that. That being said, Make me an offer.


And just for future reference for everyone, my bottom dollar price should be assumed to be what it is listed for. All my prices car close to what I have in the item or less in some cases. That being said, Make me an offer you think is fair, and I will tell you if it works for me at that time.

[JimmyFloyd]

Core Support sold.

Still have to figure out how to take the Shift lever off the column for the above quote to be good, otherwise I'll have to find a new larger box for it, but shouldn't affect the price much.

[hoss67]

By chance would you have a posi unit for 12 bolt truck? If so could I get pictures? Thanks Randy

[JimmyFloyd]

Wish I did, it would be in my blazer.

I do have a 1970 HD Dana 44 8 lug front axle with 4.10's and a PowerLok(I believe) Posi in it that I should be getting back soon. No hubs on it (were spicer) but otherwise complete.

[72junky]

Are you selling the Blazer hatch shown in the pic of the glass? IF so, interested.

[jamesi20]

what would shipping be on the inner grille to 44401 ? thanks

[DPowers]

You got any other 4-5-6 stuff?

[JimmyFloyd]

Hatch is not for sale at this time. It needs to go on my blazer once I get the latches swapped out.

I'll check tonight on the grill probably less than $50

And I only have an ash tray, and horn button from 4-5-6 trucks, but there is a 65 C10 and 66 C60 I can grab parts from locally.

[JimmyFloyd]

ok, for the grill, if I can get it in a 56x8x18, then it's $18 USPS, if it is bigger than that, then it jumps to $70. I will check UPS and fedex tomorrow through work.

[68C10HotRod]

Interested in the gas tank neck only not the filler tube or tank. How much shipped to 68134? Thx

[427mike]

I'm interested in the pedal assembly and cable that you have on the toolbox.
Shipped to 48374 - how many $$. Thanks Mike

[Puropedo]

Would you take $200 for the tach dash shipped to 93907?

[Fesser]

If the tilt is still available, I'll take it. Shipping would be to 94559. Let me know how much to send and how you prefer payment. Frank

[JimmyFloyd]

68C10HotRod: Gas tank neck is the same price as the tank, the difference being I'll ship it. The reasoning for this is that I now have to drain the tank and properly dispose of the remaining fluid, and the rest of the tank, and try not to burn down my garage in the process. I am willing to give it a shot, just not going to really get a discount on it.

427mike: Currently that pedal assembly is not for sale. It is slated to go on my truck. I'll let you know if that changed.

Puropedo: I would do $200 if you can pay by saturday. I have not heard back from others at the original price, and those who offered at this price need a week or two to get the cash. PMing you details.

Fesser: I'm going to give HavinSomeFun til saturday to get back to me if he wants it, if not, you are next. I'll get a shipping quote in the mean time.

[Fesser]

Thanks Jimmy. I may be buying another one off this site. Whichever one comes together soonest and in my budget will be the way I have to go. Frank

[68C10HotRod]

No problem Jimmy. I'll have to do the same thing with the replacement tank someone put in my burb to put this one back on. The rubber hose kinks with the aftermarket neck on there. I was going to drain out gas, & rinse multiple times with soapy water & then just fill with water before heating up the neck to remove mine. LMK if you come up with a better solution. Shoot me a PM with paypal address or post it & I'll get the $40 to you asap. Thanks.

[68C10HotRod]

Originally Posted by 68C10HotRod

No problem Jimmy. I'll have to do the same thing with the replacement tank someone put in my burb to put this one back on. The rubber hose kinks with the aftermarket neck on there. I was going to drain out gas, & rinse multiple times with soapy water & then just fill with water before heating up the neck to remove mine. LMK if you come up with a better solution. Shoot me a PM with paypal address or post it & I'll get the $40 to you asap. Thanks.

Jimmy,

Any progress on getting the Gas Tank Neck removed? Never have received paypal info so I can pay you. LMK where this stands as I'm still interested. Thanks.

[jamesi20]

do you have a firm shipping price on the inner grille yet? would be sweet if it fits he usps box.

[Puropedo]

Payment sent for tach dash!