Aluminum differetial covers ?

[Hart_Rod]

I'm considering buying a Strange or JPW heavy duty aluminum rear end cover. Are they worth the money? Will they clear a ECE super track bar? TIA.

[dmwphoto]

subscribing with interest in the responses

[nxtruck]

Yes, they're worth having. Running w/o one cost me a ring & pinion set. IDK about the ECE bar, but an LPW cover will clear the factory track bar w/o any problems. They're definitely a wise investment.

[fast_dev]

worth it. look at the lpw covers for a backbrace, even if you don't buy the backbrace kit it will have the mounting holes for it if you ever decide you need it. first one i bought didn't have it and after bending the housing i had to replace the cover to use a backbrace. Dev.

[Hart_Rod]

Originally Posted by nxtruck

Yes, they're worth having. Running w/o one cost me a ring & pinion set. IDK about the ECE bar, but an LPW cover will clear the factory track bar w/o any problems. They're definitely a wise investment.

Originally Posted by fast_dev

worth it. look at the lpw covers for a backbrace, even if you don't buy the backbrace kit it will have the mounting holes for it if you ever decide you need it. first one i bought didn't have it and after bending the housing i had to replace the cover to use a backbrace. Dev.

Any preference to Strange or LPW? This is the one I'm looking at:

http://www.summitracing.com/parts/STR-R-5221/

[Shon]

TA Performance makes a low profile design. Which I think TAP makes them all for all the companies, they just have a different logo machined on the face.

[nxtruck]

Originally Posted by Hart_Rod

Any preference to Strange or LPW? This is the one I'm looking at:

http://www.summitracing.com/parts/STR-R-5221/

That's the one I have. It's actually an LPW cover with provisions for a backbrace. I'd get it.

[69trk]

I guess i need to invest in one of these also

[Hart_Rod]

Some good pictures on the website. I wonder if you could get away with bolting it to the axle saddles instead of welding brackets on the axle tubes?

[Captainfab]

For the brace to effectively do it's job, I would say it should be attached to tabs welded directly to the axle tube.

Originally Posted by Hart_Rod

Some good pictures on the website. I wonder if you could get away with bolting it to the axle saddles instead of welding brackets on the axle tubes?

[Hart_Rod]

Originally Posted by fast_dev

worth it. look at the lpw covers for a backbrace, even if you don't buy the backbrace kit it will have the mounting holes for it if you ever decide you need it. first one i bought didn't have it and after bending the housing i had to replace the cover to use a backbrace. Dev.

Do you have any pictures of yours installed?

Originally Posted by Captainfab

For the brace to effectively do it's job, I would say it should be attached to tabs welded directly to the axle tube.

Thanks!

R/

[Hart_Rod]

The cover should be here today. I'm getting worried that my super track bar is going to have interference problems.....

[Hart_Rod]

Got the cover today and it's a really nice piece, however........the ECE track bar mount on the trailing arm puts the track bar in a position that causes intereference, . I think I have a couple of possible solutions. I'll post them when I get it figured out. Here's some pictures. Always something.....

[mongoose]

time for a watts link.

[Hart_Rod]

Originally Posted by mongoose

time for a watts link.

Naaahhhh, I have a simpler solution than that, .

[Captainfab]

Do you know anyone with a tube bender? Could bend an offset in that pandard bar..........

[Hart_Rod]

Originally Posted by Captainfab

Do you know anyone with a tube bender? Could bend an offset in that pandard bar..........

I do, but that would defeat the purpose of the double adjustable pan hard bar, not that it needs to be changed that often.

[john@thepier]

I have the same problem with my cover from DTS. Let me know when you have yours figured out. I have yet to address mine. All work and no play these days, which needs to change soon. John

[68 C-10 KID]

Here is my Lpw cover with CCP's deluxe Pan-Hard bar.

[Hart_Rod]

Originally Posted by john@thepier

I have the same problem with my cover from DTS. Let me know when you have yours figured out. I have yet to address mine. All work and no play these days, which needs to change soon. John

I'll post pictures when I get it all figured out.

Originally Posted by 68 C-10 KID

Here is my Lpw cover with CCP's deluxe Pan-Hard bar.

Thanks for the pic. Do you think the rear sway bar helps much?

[68 C-10 KID]

It drives great. I dial in all four shocks and head to the country back roads. I put in on because I don't have the fabrication tools to make a anti roll bar set up. I was told the Anti-sway bar should help the truck plant its foot print more square on the launch. Also I think I noticed the spool feeling more aggressive on the tire on sharp turns, or I could be smoking something.

[71STPSDE]

I bought the TA rear end cover and it hit my ECE track bar. I had to send it back for refund. Hopfully Hotrod can come up with a solution.

[Alex Hayley]

ECE makes a bent super track bar. I had the same problem as I was putting mine together. ECE took the straight bar back and sent a bent one.

[john@thepier]

ALEX HAYLEY please post up a picture of that bent ece bar if you would.

[71STPSDE]

I went to ECE's website and don't see anything there. Please take some pics and what was the price for the bent one?