Will this disc/drum proportioning valve work for me? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldblue1968chevy · 10-03-2010, 10:16 PM

Im going to buy a proportioning valve for my disc drum truck. Had a speedway motors catalog and was looking for best price

ECE is $100+, I normally order from them but thats crazy high

CCP Is around $50 (just valve nothing else), never ordered from them but heard good stuff?

http://www.classicperform.com/Store/...Trucks/PV2.htm

Speedway has disc drum with bracket lines

http://www.speedwaymotors.com/Disc-D...alve,9878.html

will that work for my 1/2 ton truck? Thanks

oldblue1968chevy · 10-03-2010, 10:48 PM

It says its for cars, speedway doenst carry a gm truck prop. valve, is there any difference?..

or who carrys cheapest vavlve brakcets lines?

**passthebuck** · 10-03-2010, 11:18 PM

I bought the CPP MC/booster/combination valve as a complete set up. Stops great imo...

gkesseru · 10-04-2010, 08:09 AM

Lutty's truck parts has a good combo inlcudes valve, MC lines and bracket fro $91.
http://www.luttyschevy.com/newcatalogs/Truck.pdf
I bought the Lutty's set and it fit perfectly.
Summit has bare valve fro $65.
http://www.summitracing.com/parts/RSD-PV71/?rtype=10
Seems to be manufactured by Right Stuff.
Here is shot of installed system.

gkesseru · 10-04-2010, 08:14 AM

I just looked up you Speedway link. Looks like a helluva deal.

**lolife99** · 10-04-2010, 08:17 AM

I used this one,...

http://www.performanceonline.com/SID...CYLINDER-PVKS/

Better yet,...
buy this combo and put an end to your brake problems.
http://www.performanceonline.com/60-...LVE-KIT-MCPVS/

raycow · 10-04-2010, 11:00 AM

FWIW, Speedway has been around longer than any of these other outfits. I was ordering parts from them back in the 60s and I still check their site first before looking at the other guys.

Ray

mbgmike · 10-04-2010, 04:47 PM

We have the lowest prices in the country for the same parts

oldblue1968chevy · 10-04-2010, 05:15 PM

Will the speedway valve setup work?

mbgmike · 10-04-2010, 06:03 PM

Quote:

Originally Posted by oldblue1968chevy

Will the speedway valve setup work?

They should work just fine. If you have a half ton truck its the same. They get theirs from the same MFG we do.

oldblue1968chevy · 10-04-2010, 08:33 PM

im hunting yours, it must be at the back of the brake section LOL

JOHNORO · 10-04-2010, 10:30 PM

If you get a chance get a hold of CPPJEFF
Here on this forum he is the man to talk to over at cpp
and will steer you in the right direction
by the way i have the same one on my blazer and it works great

oldblue1968chevy · 10-04-2010, 10:42 PM

the speedway or ccp?

I just orderd the speedway one, cheapest one ive found $59 plus shipping, with shipping it came to $67.59

10-03-2010, 10:16 PM	#1
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Will this disc/drum proportioning valve work for me? Im going to buy a proportioning valve for my disc drum truck. Had a speedway motors catalog and was looking for best price ECE is $100+, I normally order from them but thats crazy high CCP Is around $50 (just valve nothing else), never ordered from them but heard good stuff? http://www.classicperform.com/Store/...Trucks/PV2.htm Speedway has disc drum with bracket lines http://www.speedwaymotors.com/Disc-D...alve,9878.html will that work for my 1/2 ton truck? Thanks __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4 Last edited by oldblue1968chevy; 10-03-2010 at 10:19 PM.

10-03-2010, 10:48 PM	#2
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Will this disc/drum proportioning valve work for me? It says its for cars, speedway doenst carry a gm truck prop. valve, is there any difference?.. or who carrys cheapest vavlve brakcets lines? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4 Last edited by oldblue1968chevy; 10-03-2010 at 10:49 PM.

10-03-2010, 11:18 PM	#3
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	Re: Will this disc/drum proportioning valve work for me? I bought the CPP MC/booster/combination valve as a complete set up. Stops great imo... __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

10-04-2010, 08:09 AM	#4
gkesseru Registered User Join Date: Dec 2009 Location: California, Maryland Posts: 544	Re: Will this disc/drum proportioning valve work for me? Lutty's truck parts has a good combo inlcudes valve, MC lines and bracket fro $91. http://www.luttyschevy.com/newcatalogs/Truck.pdf I bought the Lutty's set and it fit perfectly. Summit has bare valve fro $65. http://www.summitracing.com/parts/RSD-PV71/?rtype=10 Seems to be manufactured by Right Stuff. Here is shot of installed system. Attached Images __________________ 72 Fleet (died) 78 Step (sold) 55 Step named Fred (sold) 00 F150 68 Step (named El Scorcho by PO) Build thread for the new El Scorcho http://67-72chevytrucks.com/vboard/s...d.php?t=392932

10-04-2010, 08:14 AM	#5
gkesseru Registered User Join Date: Dec 2009 Location: California, Maryland Posts: 544	Re: Will this disc/drum proportioning valve work for me? I just looked up you Speedway link. Looks like a helluva deal. __________________ 72 Fleet (died) 78 Step (sold) 55 Step named Fred (sold) 00 F150 68 Step (named El Scorcho by PO) Build thread for the new El Scorcho http://67-72chevytrucks.com/vboard/s...d.php?t=392932

10-04-2010, 08:17 AM	#6
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Will this disc/drum proportioning valve work for me? I used this one,... http://www.performanceonline.com/SID...CYLINDER-PVKS/ Better yet,... buy this combo and put an end to your brake problems. http://www.performanceonline.com/60-...LVE-KIT-MCPVS/ __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 10-04-2010 at 08:19 AM.

10-04-2010, 11:00 AM	#7
raycow Registered User Join Date: Mar 2003 Location: San Francisco, CA USA Posts: 2,454	Re: Will this disc/drum proportioning valve work for me? FWIW, Speedway has been around longer than any of these other outfits. I was ordering parts from them back in the 60s and I still check their site first before looking at the other guys. Ray

10-04-2010, 04:47 PM	#8
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Will this disc/drum proportioning valve work for me? We have the lowest prices in the country for the same parts

10-04-2010, 05:15 PM	#9
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Will this disc/drum proportioning valve work for me? Will the speedway valve setup work? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

10-04-2010, 08:33 PM	#11
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Will this disc/drum proportioning valve work for me? im hunting yours, it must be at the back of the brake section LOL __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

10-04-2010, 10:30 PM	#12
JOHNORO oldschoolblazer@yahoo.com Join Date: Jun 2007 Location: Long Beach CA. Posts: 1,968	Re: Will this disc/drum proportioning valve work for me? If you get a chance get a hold of CPPJEFF Here on this forum he is the man to talk to over at cpp and will steer you in the right direction by the way i have the same one on my blazer and it works great

10-04-2010, 10:42 PM	#13
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Will this disc/drum proportioning valve work for me? the speedway or ccp? I just orderd the speedway one, cheapest one ive found $59 plus shipping, with shipping it came to $67.59 __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.