TN Parting out 70 c20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rob68c10 · 10-04-2010, 03:20 PM

No title, engine or trans. Was a driving truck about 3 months ago. All the prices are without shipping. Some items I will not ship. I am located in west TN, and would be willing to meet, gas is on your dime and my truck gets ~13 mpg. I am negotiable on things too, not trying to make a bunch of money, just trying to sell off enough to be able to take what I need home on a trailer.

Driver condition bed....has rust over arches, PO did some bondo work, has a 1 ft x 1 ft section in front of bed that needs replacing, front of bed pushed towards cab some...... $175

There is a plastic bedliner in it, will include for an extra 25 bucks

Tailgate works, not straight $25

Eaton rear, not sure of the ratio but will find out asap $150

Sliding rear glass, not foggy $75

Grill shell, has a couple dents and been painted over $20. Will include the lights for an additional $10.

Glove box, don't think its factory $25

Door panels, need a good cleaning $30. Window cranks and openers have some pitting on them. $10 for the cranks, $10 for the handles.

Ash tray, good condition $10
Heater controls, PO put some kind of switch in it $10

Heater box, venting appears to be in good shape $50

Sun visors, need a good cleaning, fabric starting to peel on up side of one $15

In cab tank with sending unit, inside in good condition $50.

Over flow tank and washer tank plus respective bracket $20 each

Gauge dash, has been sitting outside, appears to have rust on faces $10

2 barrel air cleaner, some surface rust $15

Assorted lenses Price depends on quantity and quality of each

Headlight trim rings, great shape $25

Fan shroud, good shape, not sure if tabs are cracked but will check $30

2 core radiator, decent shape, no leaks $25

E-brake setup $15

Assorted pedals and brackets $15 each

Wiring harness, not sure how complete but will check when I can...price pending

Vent windows $30 for the set

I will take offers on the chassis, parts not mentioned, or even the whole truck. If you don't like the price, MAKE AN OFFER

Cyclone44 · 10-04-2010, 03:26 PM

If all the levers are good on the heater control....I will take it shipping to 37918 ....George

**truckdude239** · 10-04-2010, 04:05 PM

what would shipping be on the fan should? to 27104? is the glove box metal for cardborad?

**ScottH** · 10-04-2010, 04:07 PM

interested in shipping cost of door panels to 08753, and would like to see pic of steering wheel and price.

thanks.
Scott

**71blksuper4x4** · 10-04-2010, 04:29 PM

I am interested in the seat brackets. Are they bucket seat brackets? Thanks Trevor

Rob68c10 · 10-04-2010, 10:42 PM

Quote:

Originally Posted by Cyclone44

If all the levers are good on the heater control....I will take it shipping to 37918 ....George

Will check the controls hopefully tomorrow, shipping quote on wed

Quote:

Originally Posted by truckdude239

what would shipping be on the fan should? to 27104? is the glove box metal for cardborad?

Can check on shipping on wed. I believe the glove box is cardboard

Quote:

Originally Posted by ScottH

interested in shipping cost of door panels to 08753, and would like to see pic of steering wheel and price.

thanks.
Scott

Will get a quote on those hopefully wed

Quote:

Originally Posted by 71blksuper4x4

I am interested in the seat brackets. Are they bucket seat brackets? Thanks Trevor

I do not know if they are bench or bucket. I will try to compare them to the bench in my 68 and let you know.

******I am going to college and the truck is not at school so shipping quotes may take a few days*******

Bryan S · 10-05-2010, 11:39 AM

How much for the license plate lights?

Rob68c10 · 10-05-2010, 11:39 PM

Quote:

Originally Posted by Cyclone44

If all the levers are good on the heater control....I will take it shipping to 37918 ....George

All the levers are good, will try to check shipping tomorrow and let you know.

Quote:

Originally Posted by truckdude239

what would shipping be on the fan should? to 27104? is the glove box metal for cardborad?

Will try to check shipping tomorrow, glove box is cardboard. Unless your really interested I was thinking about keeping it myself.

Quote:

Originally Posted by ScottH

interested in shipping cost of door panels to 08753, and would like to see pic of steering wheel and price.

thanks.
Scott

Will try to check shipping tomorrow. Here are pics of the steering wheel. The chrome has light rust on it, I would guess it would come off. The wood is faded and starting to come apart in one section.

Quote:

Originally Posted by 71blksuper4x4

I am interested in the seat brackets. Are they bucket seat brackets? Thanks Trevor

The seat brackets appear to be for a bench seat.

Quote:

Originally Posted by Bryan S

How much for the license plate lights?

Here are some pics of the lights. I think the rust will come out. One plastic piece is missing.

67gmcstepside · 10-06-2010, 07:53 AM

I'll take the air cleaner. Is the carb hole 3 inches? zip for ship - 08527

Rob68c10 · 10-13-2010, 01:02 AM

Quote:

Originally Posted by 67gmcstepside

I'll take the air cleaner. Is the carb hole 3 inches? zip for ship - 08527

I believe it is 3 inches. Sorry for the delay. It may be a couple days before I can get a shipping quote.

projectjimmie68 · 10-15-2010, 04:35 PM

How much for door jamb switchs and wiring? Thanks Projectjimmie

67gmcstepside · 10-15-2010, 07:21 PM

Quote:

Originally Posted by Rob68c10

I believe it is 3 inches. Sorry for the delay. It may be a couple days before I can get a shipping quote.

No problem, just let me know. Thanks

**GR8-68** · 10-15-2010, 08:09 PM

will you ship the tailgate? what condition is it in? can you get a couple more pics? thankyou Larry

Cyclone44 · 10-19-2010, 11:10 PM

I sent your payment out on 10-07 have you mailed my heater control out yet?

tanman722001 · 10-21-2010, 08:13 AM

How much for the defroster tubes?And are they in good shape?How much for shipping to 27028?Thanks Tony

Rob68c10 · 10-21-2010, 02:20 PM

Quote:

Originally Posted by projectjimmie68

How much for door jamb switchs and wiring? Thanks Projectjimmie

Not quite sure what you are looking for. Can you get a picture?

Quote:

Originally Posted by GR8-68

will you ship the tailgate? what condition is it in? can you get a couple more pics? thankyou Larry

I am trying to only ship smaller things. The tailgate has some surface rust, but not through. It is pushed out some but does work.

Quote:

Originally Posted by Cyclone44

I sent your payment out on 10-07 have you mailed my heater control out yet?

Just got your payment today, the mail people in my building had my address mixed up with my roommates so it was sitting in his box. I will send it out no later than tomorrow.

Quote:

Originally Posted by crushermechanic

do you still have the tailgate? what part of west tn are you in i may be able to pick it up.

I have the gate. I am in Martin TN. There is one person before you in line, but you are second.

Quote:

Originally Posted by tanman722001

How much for the defroster tubes?And are they in good shape?How much for shipping to 27028?Thanks Tony

Tubes seem to be in good shape. Have not crawled under the dash. I will check the next time I am out that way by the truck so it may be a few days. I would take $20 plus shipping if in good shape.

projectjimmie68 · 10-22-2010, 01:34 PM

How much for the lights with the door jamb switchs and the wiring shipped to zip 32136?

projectjimmie68 · 10-22-2010, 05:01 PM

I am looking for the dome light switchs /with wiring----- when you open the door the interior light comes on --- usually the lights are under the dash and the switches are in the door jams between the hinges...you show a picture of the lights. shipped to zip 32136. Thanks

VA72C10 · 10-23-2010, 04:49 PM

Seat tracks still available? If so I will take them. Shipped to 23112

crushermechanic · 10-23-2010, 11:27 PM

ok just let me know i will be in dyersburg this week working.

Cyclone44 · 10-28-2010, 06:45 PM

Paid 11.00 for shipping on a heater control on 10-07 said payment was sent to his roomates mailbox....Said he would mail out 10-22....No Item as of yet and at this point don't expect one.....It's not right to pay for fast shipping and get such crappy service***BUYERS BEWARE***

Rob68c10 · 10-28-2010, 08:00 PM

Attention anyone interested in anything I have for sale....I am a college student with very little time. I have to drive 15 minutes to get to the truck. It may take time to find boxes for safe shipping and it may take time for me to catch the post office open when I don't have class. Promise me, I want to sell off as much as I can on this truck. I am not looking to make money on it, just to recover some of the cost buying it for parts I need. Thank you

ralphie628 · 10-29-2010, 02:48 AM

Quote:

Originally Posted by Rob68c10

Attention anyone interested in anything I have for sale....I am a college student with very little time. I have to drive 15 minutes to get to the truck. It may take time to find boxes for safe shipping and it may take time for me to catch the post office open when I don't have class. Promise me, I want to sell off as much as I can on this truck. I am not looking to make money on it, just to recover some of the cost buying it for parts I need. Thank you

pm sent

stfinney · 07-15-2012, 09:21 PM

Still have the tailgate?

buzz11011 · 07-15-2012, 10:18 PM

Would you be willing to ship the grill? if so, how much to 92870?

Thanks in advance

10-04-2010, 03:20 PM	#1
Rob68c10 Registered User Join Date: Mar 2010 Location: Eastern Shore, Maryland Posts: 159	Parting out 70 c20 No title, engine or trans. Was a driving truck about 3 months ago. All the prices are without shipping. Some items I will not ship. I am located in west TN, and would be willing to meet, gas is on your dime and my truck gets ~13 mpg. I am negotiable on things too, not trying to make a bunch of money, just trying to sell off enough to be able to take what I need home on a trailer. Driver condition bed....has rust over arches, PO did some bondo work, has a 1 ft x 1 ft section in front of bed that needs replacing, front of bed pushed towards cab some...... $175 There is a plastic bedliner in it, will include for an extra 25 bucks Tailgate works, not straight $25 Eaton rear, not sure of the ratio but will find out asap $150 Sliding rear glass, not foggy $75 Grill shell, has a couple dents and been painted over $20. Will include the lights for an additional $10. Glove box, don't think its factory $25 Door panels, need a good cleaning $30. Window cranks and openers have some pitting on them. $10 for the cranks, $10 for the handles. Ash tray, good condition $10 Heater controls, PO put some kind of switch in it $10 Heater box, venting appears to be in good shape $50 Sun visors, need a good cleaning, fabric starting to peel on up side of one $15 In cab tank with sending unit, inside in good condition $50. Over flow tank and washer tank plus respective bracket $20 each Gauge dash, has been sitting outside, appears to have rust on faces $10 2 barrel air cleaner, some surface rust $15 Assorted lenses Price depends on quantity and quality of each Headlight trim rings, great shape $25 Fan shroud, good shape, not sure if tabs are cracked but will check $30 2 core radiator, decent shape, no leaks $25 E-brake setup $15 Assorted pedals and brackets $15 each Wiring harness, not sure how complete but will check when I can...price pending Vent windows $30 for the set I will take offers on the chassis, parts not mentioned, or even the whole truck. If you don't like the price, MAKE AN OFFER Last edited by Rob68c10; 10-04-2010 at 03:22 PM.

10-04-2010, 03:26 PM	#2
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Parting out 70 c20 If all the levers are good on the heater control....I will take it shipping to 37918 ....George

10-04-2010, 04:05 PM	#3
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Parting out 70 c20 what would shipping be on the fan should? to 27104? is the glove box metal for cardborad? __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube Last edited by truckdude239; 10-04-2010 at 04:07 PM.

10-04-2010, 04:07 PM	#4
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting out 70 c20 interested in shipping cost of door panels to 08753, and would like to see pic of steering wheel and price. thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-04-2010, 04:29 PM	#5
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Parting out 70 c20 I am interested in the seat brackets. Are they bucket seat brackets? Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever Last edited by 71blksuper4x4; 10-04-2010 at 04:38 PM.

10-05-2010, 11:39 AM	#7
Bryan S Registered User Join Date: Sep 2010 Location: Visalia Ca Posts: 19	Re: Parting out 70 c20 How much for the license plate lights?

10-06-2010, 07:53 AM	#9
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: Parting out 70 c20 I'll take the air cleaner. Is the carb hole 3 inches? zip for ship - 08527

10-15-2010, 04:35 PM	#11
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: Parting out 70 c20 How much for door jamb switchs and wiring? Thanks Projectjimmie

10-15-2010, 08:09 PM	#13
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: Parting out 70 c20 will you ship the tailgate? what condition is it in? can you get a couple more pics? thankyou Larry

10-19-2010, 11:10 PM	#14
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Parting out 70 c20 I sent your payment out on 10-07 have you mailed my heater control out yet?

10-21-2010, 08:13 AM	#15
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: Parting out 70 c20 How much for the defroster tubes?And are they in good shape?How much for shipping to 27028?Thanks Tony __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

10-22-2010, 01:34 PM	#17
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: Parting out 70 c20 How much for the lights with the door jamb switchs and the wiring shipped to zip 32136?

10-22-2010, 05:01 PM	#18
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: Parting out 70 c20 I am looking for the dome light switchs /with wiring----- when you open the door the interior light comes on --- usually the lights are under the dash and the switches are in the door jams between the hinges...you show a picture of the lights. shipped to zip 32136. Thanks

10-23-2010, 04:49 PM	#19
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Parting out 70 c20 Seat tracks still available? If so I will take them. Shipped to 23112 __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-23-2010, 11:27 PM	#20
crushermechanic Registered User Join Date: Dec 2009 Location: Fort Walton Beach, Fl Posts: 361	Re: Parting out 70 c20 ok just let me know i will be in dyersburg this week working.



Register or Log In To remove these advertisements.

10-28-2010, 06:45 PM	#21
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Parting out 70 c20 Paid 11.00 for shipping on a heater control on 10-07 said payment was sent to his roomates mailbox....Said he would mail out 10-22....No Item as of yet and at this point don't expect one.....It's not right to pay for fast shipping and get such crappy service*BUYERS BEWARE*

10-28-2010, 08:00 PM	#22
Rob68c10 Registered User Join Date: Mar 2010 Location: Eastern Shore, Maryland Posts: 159	Re: Parting out 70 c20 Attention anyone interested in anything I have for sale....I am a college student with very little time. I have to drive 15 minutes to get to the truck. It may take time to find boxes for safe shipping and it may take time for me to catch the post office open when I don't have class. Promise me, I want to sell off as much as I can on this truck. I am not looking to make money on it, just to recover some of the cost buying it for parts I need. Thank you

07-15-2012, 09:21 PM	#24
stfinney Registered User Join Date: Apr 2011 Location: Vero Beach, FL Posts: 173	Re: Parting out 70 c20 Still have the tailgate? __________________ Shawn 1972 C10 Custom LWB, 3-speed automatic, 350 bored .060 over, Vortec heads, Crane Energizer 260 H10 Cam My Beater/Work in Progress http://67-72chevytrucks.com/vboard/s...d.php?t=502044

07-15-2012, 10:18 PM	#25
buzz11011 Registered User Join Date: May 2012 Location: SoCal Posts: 14	Re: Parting out 70 c20 Would you be willing to ship the grill? if so, how much to 92870? Thanks in advance

Register or Log In To remove these advertisements.