SC 6.2/6.5 turbo and serpentine parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Stitch* · 10-10-2010, 06:06 PM

All of this came off of a 92 so it's all mechanical...

Complete turbo setup including turbo, exhaust manifolds, intake manifolds, crossover pipe, down pipe, 6.5td CDR, and heat shields...turbo is a GM1 with no shaft play or end play...$500 obo plus shipping

Complete Serpentine system including A/C compressor, alternator, waterpump, tensioner, all pulleys, and all brackets...$300 obo plus shipping

4911 DB2 Injection Pump...works great...$400 obo plus shipping

6.5 turbo shortie injectors...$100 obo shipped in the lower 48

2 fuel filter housings...$40 each obo plus shipping

'Turbo Power' engine cover...$50 obo plus shipping

all of the prices are negotiable...I'm going to be swapping to a 6.0 ls motor so no need for this anymore...you can pm me on here or email me at stitch@the***************.com

Posted via Mobile Device
Posted via Mobile Device

*Stitch* · 10-22-2010, 01:32 PM

Come on fellas

ANY REASONABLE OFFERS

I need this stuff out of my garage. Thanks
Posted via Mobile Device

Mattman2010 · 10-22-2010, 02:05 PM

I would be all over the turbo, but I have to buy the 6.2 first, and I am low on project funds.

STOCKISH · 10-22-2010, 05:52 PM

Dern, someone will have a stout 6.2 with all those parts thrown on it! Good luck.

*Stitch* · 10-22-2010, 06:03 PM

Thanks Josh. It'll make someones 6.2 a happy camper.
Posted via Mobile Device

48cj2a · 11-16-2010, 04:21 PM

Stitch do you still have all the turbo/serpentine stuff?

I finally found a donor 6.2 for my CUCV project and could sure sweeten the swap with this stuff.

I'm on a bit of a budget as we all are, and don't want to insult you but said make an offer...so would you sell the whole kit n kaboodle $350 plus shipping?

*Stitch* · 11-16-2010, 09:45 PM

that's more than $1000 off the total of all the parts...I can do $350 plus shipping for the turbo setup not including the injectors or the injection pump

48cj2a · 11-16-2010, 10:28 PM

I know its quite a bit off your asking price...did not want to offend.

Its just I do not any more in my budget after purchasing a third donor truck 87CC;(

I still would have to scrape up shipping which I would assume will be close to another $100.

I would need the shortie injectors too, $400 for everything except the IP?

Complete turbo stuff, filters, injectors, serpentine the whole package except (no IP)

Curious if you have all the mounting hardware too?

*Stitch* · 11-16-2010, 10:59 PM

I should have all the hardware...I have another guy over on dieselplace that I'm working a deal with everything right now for a grand plus shipping...I'll have to see how things work out with him and then we can talk...

48cj2a · 12-10-2010, 01:46 PM

Quote:

Originally Posted by Stitch

I should have all the hardware...I have another guy over on dieselplace that I'm working a deal with everything right now for a grand plus shipping...I'll have to see how things work out with him and then we can talk...

Stitch - Did this ever workout or could we negotiate? I have the IP Vacuum switch/valve to work into the trade. (Crew sold today with tranny for basically scap so not to much else in way of funds) Are you looking for anything?

I know early bird gets the worm but found your post where you bought the stuff and man did you get a deal!!!

Come on now' help a brother out - it's Christmas and the Wife and three daughters all need new shoes.....

48cj2a · 11-17-2010, 12:22 AM

fair enough - thanks for considering my offer.

*Stitch* · 12-11-2010, 05:02 PM

Lol all the stuff sold last week. Sorry about that but mine talks ya know. I may not need that switch or not but it would be nice to have if I do need it. How much do you want for it. Thanks
Posted via Mobile Device

10-10-2010, 06:06 PM	#1
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	6.2/6.5 turbo and serpentine parts All of this came off of a 92 so it's all mechanical... Complete turbo setup including turbo, exhaust manifolds, intake manifolds, crossover pipe, down pipe, 6.5td CDR, and heat shields...turbo is a GM1 with no shaft play or end play...$500 obo plus shipping Complete Serpentine system including A/C compressor, alternator, waterpump, tensioner, all pulleys, and all brackets...$300 obo plus shipping 4911 DB2 Injection Pump...works great...$400 obo plus shipping 6.5 turbo shortie injectors...$100 obo shipped in the lower 48 2 fuel filter housings...$40 each obo plus shipping 'Turbo Power' engine cover...$50 obo plus shipping all of the prices are negotiable...I'm going to be swapping to a 6.0 ls motor so no need for this anymore...you can pm me on here or email me at stitch@the**************.com Posted via Mobile Device* Posted via Mobile Device

10-22-2010, 01:32 PM	#2
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 6.2/6.5 turbo and serpentine parts Come on fellas ANY REASONABLE OFFERS I need this stuff out of my garage. Thanks Posted via Mobile Device

10-22-2010, 02:05 PM	#3
Mattman2010 Registered User Join Date: Jun 2010 Location: Pittsburg, KS Posts: 953	Re: 6.2/6.5 turbo and serpentine parts I would be all over the turbo, but I have to buy the 6.2 first, and I am low on project funds. __________________ 1980 K10 - 6.2L Diesel/SM465/NP205 Build Thread 1984 K30 CC Dually - "The Tank" 12V Cummins/Nv4500/Np205/D60/D70HD 4" lift & 37's Build Thread 1960 C-60 Dump Truck Make it road worthy! Thread

10-22-2010, 05:52 PM	#4
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 6.2/6.5 turbo and serpentine parts Dern, someone will have a stout 6.2 with all those parts thrown on it! Good luck. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

10-22-2010, 06:03 PM	#5
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 6.2/6.5 turbo and serpentine parts Thanks Josh. It'll make someones 6.2 a happy camper. Posted via Mobile Device

11-16-2010, 04:21 PM	#6
48cj2a Registered User Join Date: Feb 2010 Location: Central, IL Posts: 599	Re: 6.2/6.5 turbo and serpentine parts Stitch do you still have all the turbo/serpentine stuff? I finally found a donor 6.2 for my CUCV project and could sure sweeten the swap with this stuff. I'm on a bit of a budget as we all are, and don't want to insult you but said make an offer...so would you sell the whole kit n kaboodle $350 plus shipping? __________________ 03 Suburban Z71 Z71 98 GMC Yukon SLT 4x4 Yukon 86 M1009 CUCV Project Milverado 48 Willys CJ2A 48CJ2A Last edited by 48cj2a; 11-16-2010 at 04:24 PM.

11-16-2010, 09:45 PM	#7
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 6.2/6.5 turbo and serpentine parts that's more than $1000 off the total of all the parts...I can do $350 plus shipping for the turbo setup not including the injectors or the injection pump

11-16-2010, 10:28 PM	#8
48cj2a Registered User Join Date: Feb 2010 Location: Central, IL Posts: 599	Re: 6.2/6.5 turbo and serpentine parts I know its quite a bit off your asking price...did not want to offend. Its just I do not any more in my budget after purchasing a third donor truck 87CC;( I still would have to scrape up shipping which I would assume will be close to another $100. I would need the shortie injectors too, $400 for everything except the IP? Complete turbo stuff, filters, injectors, serpentine the whole package except (no IP) Curious if you have all the mounting hardware too? __________________ 03 Suburban Z71 Z71 98 GMC Yukon SLT 4x4 Yukon 86 M1009 CUCV Project Milverado 48 Willys CJ2A 48CJ2A

11-16-2010, 10:59 PM	#9
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 6.2/6.5 turbo and serpentine parts I should have all the hardware...I have another guy over on dieselplace that I'm working a deal with everything right now for a grand plus shipping...I'll have to see how things work out with him and then we can talk...

11-17-2010, 12:22 AM	#11
48cj2a Registered User Join Date: Feb 2010 Location: Central, IL Posts: 599	Re: 6.2/6.5 turbo and serpentine parts fair enough - thanks for considering my offer. __________________ 03 Suburban Z71 Z71 98 GMC Yukon SLT 4x4 Yukon 86 M1009 CUCV Project Milverado 48 Willys CJ2A 48CJ2A

12-11-2010, 05:02 PM	#12
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 6.2/6.5 turbo and serpentine parts Lol all the stuff sold last week. Sorry about that but mine talks ya know. I may not need that switch or not but it would be nice to have if I do need it. How much do you want for it. Thanks Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.