Fasteners for instrument bezel & glove box - The 1947 - Present Chevrolet & GMC Truck Message Board Network

robt_virginia · 10-11-2010, 06:54 PM

I have a '62 Chevy C/10 that I'm trying to fix up.

I have looked for the below sheet metal fasteners at LMC, Ecklers, Bob's, etc.. but have been unable to locate. The one on the left, I found at the top of my glovebox. The one on the right, I found on the sides of the glove box (x4). -- Used to hold in the cardboard box. The one on the right is also used to fasten the instrument cluster bezel into the dash (x5)

I'm in need of one of each. Does anybody know where to buy these?

**aerotruk63** · 10-11-2010, 07:57 PM

http://www.fastenal.com/web/search/p...l&Ntpc=1&Nty=0

Start at page 5...

63 & 64 Bowties · 10-11-2010, 07:59 PM

The one on the right your local NAPA will have. Captured body nut.

**aerotruk63** · 10-11-2010, 07:59 PM

Ask in the parts for sale section as well.

Andice · 10-11-2010, 08:05 PM

Looks like J-nuts and/or flat nuts. They should be available at Lowe's and Home Depot. Crack that J-nut in half and you'll have a flat nut.

Andice · 10-11-2010, 08:09 PM

Home Depot.....

Andice · 10-11-2010, 08:13 PM

Oops! I meant speed not J-nut.... Here is a speed nut from Home Depot.

robt_virginia · 10-11-2010, 08:24 PM

Thanks for the help. I found: #10 Panel Range:.025"-.125" Center 11/32" Spring Type U Nut at the link that aerotruck63 recommended. Never knew they were referred to as "U Nuts". I saw those flat nuts at Home depot -- I guess that'll work for the one on the left.

Thanks again guys -- this forum is really a big help!!

robt_virginia · 10-11-2010, 08:50 PM

Thanks Andice, I didn't remember seeing "U Nuts" or "speed nuts" at Home Depot -- but that picture sure does look like mine. I'll have to look again. Being able to buy 1 or 2 locally instead of a box of 25 from the online fastener superstore will be faster and of course cheaper!

10-11-2010, 07:57 PM	#2
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Fasteners for instrument bezel & glove box http://www.fastenal.com/web/search/p...l&Ntpc=1&Nty=0 Start at page 5... __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 Last edited by aerotruk63; 10-11-2010 at 07:57 PM.

10-11-2010, 07:59 PM	#3
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: Fasteners for instrument bezel & glove box The one on the right your local NAPA will have. Captured body nut. __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi

10-11-2010, 07:59 PM	#4
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Fasteners for instrument bezel & glove box Ask in the parts for sale section as well. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

10-11-2010, 08:05 PM	#5
Andice Registered User Join Date: Oct 2009 Location: Austin, Texas Posts: 241	Re: Fasteners for instrument bezel & glove box Looks like J-nuts and/or flat nuts. They should be available at Lowe's and Home Depot. Crack that J-nut in half and you'll have a flat nut.

10-11-2010, 08:09 PM	#6
Andice Registered User Join Date: Oct 2009 Location: Austin, Texas Posts: 241	Re: Fasteners for instrument bezel & glove box Home Depot..... Attached Images

10-11-2010, 06:54 PM	#1
robt_virginia Registered User Join Date: Sep 2010 Location: Richmond, VA Posts: 14	Fasteners for instrument bezel & glove box I have a '62 Chevy C/10 that I'm trying to fix up. I have looked for the below sheet metal fasteners at LMC, Ecklers, Bob's, etc.. but have been unable to locate. The one on the left, I found at the top of my glovebox. The one on the right, I found on the sides of the glove box (x4). -- Used to hold in the cardboard box. The one on the right is also used to fasten the instrument cluster bezel into the dash (x5) I'm in need of one of each. Does anybody know where to buy these? __________________ 1962 C10 Sidestep Shortbed 350, 700R4 http://picasaweb.google.com/robtinvi...evyC10Project#

10-11-2010, 08:13 PM	#7
Andice Registered User Join Date: Oct 2009 Location: Austin, Texas Posts: 241	Re: Fasteners for instrument bezel & glove box Oops! I meant speed not J-nut.... Here is a speed nut from Home Depot. Attached Images

10-11-2010, 08:24 PM	#8
robt_virginia Registered User Join Date: Sep 2010 Location: Richmond, VA Posts: 14	Re: Fasteners for instrument bezel & glove box Thanks for the help. I found: #10 Panel Range:.025"-.125" Center 11/32" Spring Type U Nut at the link that aerotruck63 recommended. Never knew they were referred to as "U Nuts". I saw those flat nuts at Home depot -- I guess that'll work for the one on the left. Thanks again guys -- this forum is really a big help!! __________________ 1962 C10 Sidestep Shortbed 350, 700R4 http://picasaweb.google.com/robtinvi...evyC10Project#

10-11-2010, 08:50 PM	#9
robt_virginia Registered User Join Date: Sep 2010 Location: Richmond, VA Posts: 14	Re: Fasteners for instrument bezel & glove box Thanks Andice, I didn't remember seeing "U Nuts" or "speed nuts" at Home Depot -- but that picture sure does look like mine. I'll have to look again. Being able to buy 1 or 2 locally instead of a box of 25 from the online fastener superstore will be faster and of course cheaper! __________________ 1962 C10 Sidestep Shortbed 350, 700R4 http://picasaweb.google.com/robtinvi...evyC10Project#



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.