MS MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc etc) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DrtyJack75 · 10-18-2010, 10:24 PM

I have a few items for sale, some are not off/out of the truck yet so I dont know how much till I get them out and see the condition. If your interested in something, PM me and we can discuss the price. I have some other parts and I'll get pictures as I pull stuff off.....just wanted to see if there was any interest as I go.

- Inner Fender Wells $75 for both

- Heater Core Box w/(pretty new) Heater Core $75 SHIPPED

- NEW Grey Plastic Door Panel Set w/arm rests(LMC Part # 38-2520-GR/38-2538-GR) $85
- Dash Pad Grey (no hardware) $20

PICK UP ONLY
- Trailing Arms
- Whole Front Crossmember/Control Arms (NO SPINDLES/ROTORS/BRAKES)
- Driver Side Window Vent (probably needs new rubber)
- Gas Tank

- POSSIBLY CHANGING INTERIOR OUT, so bench seat and door panels with NEW grey leathette interior...

**too much stuff** · 10-18-2010, 10:37 PM

Interested in the tilt.

Booya · 10-18-2010, 10:39 PM

Also interested in the tilt if Too Much Stuff Passes.

**too much stuff** · 10-18-2010, 10:42 PM

I will take it pending any problems...

smokinstang70 · 10-18-2010, 10:44 PM

please put me in line for tilt... money in hand.

Thanks

Liddy71 · 10-18-2010, 10:56 PM

Interested in ece lowing stuff what all is there and specs.

brans72 · 10-18-2010, 10:56 PM

Will you sell shocks as a set?If so I am intersted Brandon

jmedero · 10-18-2010, 11:03 PM

Interested in control arms and bench seat. Can I get more info and maybe better pics?
Posted via Mobile Device

hounddogs! · 10-18-2010, 11:13 PM

#2 on the bench seat. Pics of the door panels please. Will everything ship to 66049?

Loren

usmcchevy · 10-19-2010, 12:21 AM

In line for the tilt and interested in the seat.

DrtyJack75 · 10-18-2010, 11:12 PM

Liddy 71- I'm going to call ECE tomorrow, I can't remember what the springs are. I believe their 1.5 or 2" for the front and 5" for the rear. It's springs, shocks, adjustable panhard bar.

You can go to Early Classic Enterprises and see the set. I'm not selling the drooped spindles or U bolts though.

Brans- yes if Someone doesn't want the whole setup.

Jmedero- I can't remember the name of the control
Arms. Ill take pictures tomorrow. As for bench, just a feeler
Right now as I'm looking for new chevy tahoe seats but I'll take some pics of that too.
Posted via Mobile Device

**Todd68Chevy** · 10-19-2010, 06:34 AM

Interested in lowered rear springs pending price and verifying they are 5" drop. Thanks, Todd

Liddy71 · 10-19-2010, 08:05 AM

let me know what it is

angelo_32806 · 10-19-2010, 08:13 AM

If thay do not sell put me in line for the Control Arms

HuggerCST · 10-19-2010, 09:13 AM

I'm interested in the stainless bed strips if they are in good shape and for sale.

faribran · 10-19-2010, 09:28 AM

i may be interested in the adjustable panhard bar,( if you will part). what brand (ECE)and how much? shipped to 36345

acaruth · 10-19-2010, 10:17 AM

I am interested in the front springs if they are indeed 2".

hoss67 · 10-19-2010, 10:53 AM

I would be interested in the wheel tubs would like to see picture of the other one. An I can pick up will be coming down there last week of this month. Thanks Randy

scrapmetalart · 10-19-2010, 11:17 AM

ill get in line for the lower control arms. are they 3"

faribran · 10-19-2010, 11:28 AM

do i see the flat metal panel that goes under the radiator?.. condition? pics plz

DrtyJack75 · 10-19-2010, 11:48 AM

BED STRIPS and FLAT PIECE BELOW RADIATOR ARE NOT FOR SALE

Lower Kit is ECE (Early Classic Enterprise)
1" Front
5" Rear
w/Supertrack Bar Kit

I have a number of people in line for the Steering Column and ECE Lower Kit. As of right now, their sold and I'll repost if all the offers fall through.

I'll be PM'ing the first responces (I received PM's as I requested along with responces to this thread)

VA72C10 · 10-19-2010, 11:52 AM

I'll will take the tilt if everyone else passes

I will also take the door panels w/ armrest, dash pad (pending condition),
and if the control arms are passed I'll take those also

Thanks

bguild · 10-19-2010, 01:05 PM

I would be interested in these two if you would split them out---Adjustable Panhard Bar, Shock Mount Relocator Kit...

I also woudl be interested in the two rear fender wells. Can i get some better pics of those?

**1970greenc10** · 10-19-2010, 06:20 PM

interested in the front inner fenders could I get a pic of the other one, and is it just me or does the back side of the driver one have a piece cut out of it.
Thanks,Marty

DrtyJack75 · 10-19-2010, 07:17 PM

Quote:

Originally Posted by 1970greenc10

interested in the front inner fenders could I get a pic of the other one, and is it just me or does the back side of the driver one have a piece cut out of it.
Thanks,Marty

You know I never even looked twice at it...I thought they were just like that.

Anyone else know?

Im not near my truck right now so I cant look at it.

10-18-2010, 10:24 PM	#1
DrtyJack75 Registered User Join Date: Feb 2008 Location: West Sacramento, CA Posts: 417	MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc etc) I have a few items for sale, some are not off/out of the truck yet so I dont know how much till I get them out and see the condition. If your interested in something, PM me and we can discuss the price. I have some other parts and I'll get pictures as I pull stuff off.....just wanted to see if there was any interest as I go. - Inner Fender Wells $75 for both - Heater Core Box w/(pretty new) Heater Core $75 SHIPPED - NEW Grey Plastic Door Panel Set w/arm rests(LMC Part # 38-2520-GR/38-2538-GR) $85 - Dash Pad Grey (no hardware) $20 PICK UP ONLY - Trailing Arms - Whole Front Crossmember/Control Arms (NO SPINDLES/ROTORS/BRAKES) - Driver Side Window Vent (probably needs new rubber) - Gas Tank - POSSIBLY CHANGING INTERIOR OUT, so bench seat and door panels with NEW grey leathette interior... Last edited by DrtyJack75; 10-22-2010 at 03:04 PM. Reason: parts sold

10-18-2010, 10:39 PM	#3
Booya Registered User Join Date: Jun 2008 Location: Boise Idaho Posts: 117	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e Also interested in the tilt if Too Much Stuff Passes.

10-18-2010, 10:42 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,736	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e I will take it pending any problems... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-18-2010, 10:44 PM	#5
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e please put me in line for tilt... money in hand. Thanks

10-18-2010, 10:56 PM	#6
Liddy71 Registered User Join Date: May 2010 Location: Kenova, WV Posts: 821	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e Interested in ece lowing stuff what all is there and specs.

10-18-2010, 10:37 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,736	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e Interested in the tilt. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-18-2010, 10:56 PM	#7
brans72 Registered User Join Date: Dec 2009 Location: Durham,NC Posts: 636	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e Will you sell shocks as a set?If so I am intersted Brandon Last edited by brans72; 10-18-2010 at 10:57 PM.

10-18-2010, 11:03 PM	#8
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e Interested in control arms and bench seat. Can I get more info and maybe better pics? Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

10-18-2010, 11:13 PM	#9
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 886	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e #2 on the bench seat. Pics of the door panels please. Will everything ship to 66049? Loren __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0

10-19-2010, 12:21 AM	#10
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e In line for the tilt and interested in the seat. __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

10-18-2010, 11:12 PM	#11
DrtyJack75 Registered User Join Date: Feb 2008 Location: West Sacramento, CA Posts: 417	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e Liddy 71- I'm going to call ECE tomorrow, I can't remember what the springs are. I believe their 1.5 or 2" for the front and 5" for the rear. It's springs, shocks, adjustable panhard bar. You can go to Early Classic Enterprises and see the set. I'm not selling the drooped spindles or U bolts though. Brans- yes if Someone doesn't want the whole setup. Jmedero- I can't remember the name of the control Arms. Ill take pictures tomorrow. As for bench, just a feeler Right now as I'm looking for new chevy tahoe seats but I'll take some pics of that too. Posted via Mobile Device

10-19-2010, 06:34 AM	#12
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e Interested in lowered rear springs pending price and verifying they are 5" drop. Thanks, Todd __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

10-19-2010, 08:05 AM	#13
Liddy71 Registered User Join Date: May 2010 Location: Kenova, WV Posts: 821	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e let me know what it is

10-19-2010, 08:13 AM	#14
angelo_32806 Registered User Join Date: May 2009 Location: Orlando FL Posts: 107	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e If thay do not sell put me in line for the Control Arms

10-19-2010, 09:13 AM	#15
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e I'm interested in the stainless bed strips if they are in good shape and for sale. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com Last edited by HuggerCST; 10-19-2010 at 09:14 AM.



Register or Log In To remove these advertisements.

10-19-2010, 09:28 AM	#16
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e i may be interested in the adjustable panhard bar,( if you will part). what brand (ECE)and how much? shipped to 36345 __________________ "

10-19-2010, 10:17 AM	#17
acaruth Registered User Join Date: Aug 2010 Location: MD Posts: 28	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e I am interested in the front springs if they are indeed 2".

10-19-2010, 10:53 AM	#18
hoss67 Registered User Join Date: Jun 2009 Location: Harrisville, MS Posts: 267	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e I would be interested in the wheel tubs would like to see picture of the other one. An I can pick up will be coming down there last week of this month. Thanks Randy

10-19-2010, 11:17 AM	#19
scrapmetalart Junior Member Join Date: Mar 2007 Location: DAYTON Posts: 505	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e ill get in line for the lower control arms. are they 3" __________________ frontstreetcycle on Instagram Last edited by scrapmetalart; 10-19-2010 at 11:18 AM.

10-19-2010, 11:28 AM	#20
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e do i see the flat metal panel that goes under the radiator?.. condition? pics plz __________________ "

10-19-2010, 11:48 AM	#21
DrtyJack75 Registered User Join Date: Feb 2008 Location: West Sacramento, CA Posts: 417	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e BED STRIPS and FLAT PIECE BELOW RADIATOR ARE NOT FOR SALE Lower Kit is ECE (Early Classic Enterprise) 1" Front 5" Rear w/Supertrack Bar Kit I have a number of people in line for the Steering Column and ECE Lower Kit. As of right now, their sold and I'll repost if all the offers fall through. I'll be PM'ing the first responces (I received PM's as I requested along with responces to this thread)

10-19-2010, 11:52 AM	#22
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e I'll will take the tilt if everyone else passes I will also take the door panels w/ armrest, dash pad (pending condition), and if the control arms are passed I'll take those also Thanks __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-19-2010, 01:05 PM	#23
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e I would be interested in these two if you would split them out---Adjustable Panhard Bar, Shock Mount Relocator Kit... I also woudl be interested in the two rear fender wells. Can i get some better pics of those? __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED

10-19-2010, 06:20 PM	#24
1970greenc10 Senior Member Join Date: Oct 2008 Location: Forestville, NY Posts: 225	Re: MISC NEW/USED PARTS (ECE Lower Springs, Adjust. Panhard, Inner Fenders, etc etc e interested in the front inner fenders could I get a pic of the other one, and is it just me or does the back side of the driver one have a piece cut out of it. Thanks,Marty __________________ My Chevys 79 caprice classic 70 c/10 69 k/10 03 silverado

Register or Log In To remove these advertisements.