Manual to power brakes

[Sonicman]

I am going from manual brakes to power brakes. The new booster and master came already assembled. Do I need to separate them and bench bleed the master? Can someone give me a how to on bench bleeding?

[stich626]

you'll need to take the master off..
and go to napa or others and get the bleading kit,
unless it came wuth your set up
it's 2 rubber hoses and fittings to screw into the ports of the master,
the rubber hose goes from the fittings in the ports to the master so when you pump the master, the fluid goes back into the master..
if you don't have the kit to blead they are very cheap

[Sonicman]

I got it all done but I had to make my own hoses. I went to four different auto stores and know one knew what I was talking. Oh well I got power brakes now!!!!!!!!!!!!!!!!

Thanks bud!!!!!!!!