Transmission seems to slip?

[Slick67]

I finally got it running and the trans seems to not be grabbing like it should. Maybe it still needs to be run a little before it gets all of the fluid running through it completely? The trans worked fine when I pulled it and it was rebuilt before I got the truck. The only thing I have done to it is put a new filter in it.......and clean and paint it. Any suggestions?

YouTube - 1967 chevy c10

[Longhorn Man]

you double checked the fluid level?
You didn't by chance install an aftermarket converter did you?

[Stocker]

Mine will sometimes slip off-idle initially, then grab, when I try to go forward if the fluid is low. Kinda seems like that is what yours is doing in the video clip.

[Slick67]

Originally Posted by Longhorn Man

you double checked the fluid level?
You didn't by chance install an aftermarket converter did you?

Yes, maybe 4 times. It was the tc that was in the truck when I got it. It did fine before I pulled it.

Originally Posted by Stocker

Mine will sometimes slip off-idle initially, then grab, when I try to go forward if the fluid is low. Kinda seems like that is what yours is doing in the video clip.

I will have to check it again since I have pulled it outta the shop about 4 times.

[Slick67]

Sounds like the trans pump has been stripped according to 2 mechanics. I didn't get the tourque converter on all of the way so I gotta pull the tranny, and get it fixed. THIS SUX!!!!!!!

[Slick67]

I got the tranny out and let the mechanic look at it tonight. He said there isn't anything wrong that he could tell. He said put it in the truck, jack up the rear tires, and run it in reverse for a little while. I have heard of this before when a trans sits for a long time it will kind of seize. Turbo 400s seem to be a more common tranny for this issue also.