Starter and alternator wiring

[3r!c84]

On the starter there is 1 big conector and 2 small ones. What small one do I put the wire? Or do it matter?


And the alternator plug can go in both ways what is the right way to plug it in?




Stock wiring for a 84 c10 305 th350
Posted via Mobile Device

[danomano]

One should be marked R and S.
S is for start and the R is for the ignition(you only need this if you got the old points system don not use on HEI).

We need to see what type of alternaot you got.

[3r!c84]

Originally Posted by danomano

One should be marked R and S.
S is for start and the R is for the ignition(you only need this if you got the old points system don not use on HEI).

We need to see what type of alternaot you got.

so put it on the R one? is that the one closet to the block?

and its just a stock alturnator with 3 connocters. one plug type and one bolt in wire

guess they call it a 3 wire ?

[fixit-p]

Connect the starter wire to the "S" terminal it's the one closer to the block.
The alt should be a 12SI and the terminals should be labeled 1 and 2 # 1 should have switched ignition through a charge light or resistor and terminal 2 should have full battery power.