looking to buy a intake for 66 250 6 cylinder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

truckman32 · 03-02-2003, 05:13 PM

i need a 66 model intake for a 250 straight 6 engine,i need a driverside door for a 62 chevy c10 any hot rod parts for the 6 banger i'll buy them

chevy lover · 03-02-2003, 05:59 PM

try to find an offenhouser or clifford intake for good performance

truckman32 · 03-02-2003, 09:21 PM

thanks ,do you know were i can order performance parts for the 250

chevy lover · 03-03-2003, 01:21 AM

http://www.cliffordperformance.com/

try this site. might be a little pricy but good stuff.
My friend and I built his 250 that was in a 69 nova. bored out, head was milled and had a crane cam with a offenhuaser 4 barrel intake with holley 600. that motor had enough horse and torgue to bust the trans so he ended up having one built. And if I had to take a guess at the hp I would put it at around 350-400hp.

truckman32 · 03-04-2003, 12:43 AM

i checked out the site no intakes for chevy 250

chevy lover · 03-04-2003, 09:13 AM

ok, sorry i didn't look that close to the site. I know the intake on the 250 we built was an offenhauser. with that the only thing i can tell you is check you local speed shops or try JEGS or Summit.

03-02-2003, 05:13 PM	#1
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	looking to buy a intake for 66 250 6 cylinder i need a 66 model intake for a 250 straight 6 engine,i need a driverside door for a 62 chevy c10 any hot rod parts for the 6 banger i'll buy them

03-02-2003, 05:59 PM	#2
chevy lover HMMMM Chevy Join Date: Aug 2002 Location: Quakertown, Pa Posts: 203	try to find an offenhouser or clifford intake for good performance __________________ 68 Chevy C10 swb(under construction) 82 GMC K1500 6.2l diesel (daily driver) 77 Chevy K30 frame (only thing left is axles and trans/transfer)______________________________ Mike

03-02-2003, 09:21 PM	#3
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	thanks ,do you know were i can order performance parts for the 250 __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

03-03-2003, 01:21 AM	#4
chevy lover HMMMM Chevy Join Date: Aug 2002 Location: Quakertown, Pa Posts: 203	http://www.cliffordperformance.com/ try this site. might be a little pricy but good stuff. My friend and I built his 250 that was in a 69 nova. bored out, head was milled and had a crane cam with a offenhuaser 4 barrel intake with holley 600. that motor had enough horse and torgue to bust the trans so he ended up having one built. And if I had to take a guess at the hp I would put it at around 350-400hp. __________________ 68 Chevy C10 swb(under construction) 82 GMC K1500 6.2l diesel (daily driver) 77 Chevy K30 frame (only thing left is axles and trans/transfer)______________________________ Mike Last edited by chevy lover; 03-03-2003 at 01:28 AM.

03-04-2003, 12:43 AM	#5
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	i checked out the site no intakes for chevy 250 __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

03-04-2003, 09:13 AM	#6
chevy lover HMMMM Chevy Join Date: Aug 2002 Location: Quakertown, Pa Posts: 203	ok, sorry i didn't look that close to the site. I know the intake on the 250 we built was an offenhauser. with that the only thing i can tell you is check you local speed shops or try JEGS or Summit. __________________ 68 Chevy C10 swb(under construction) 82 GMC K1500 6.2l diesel (daily driver) 77 Chevy K30 frame (only thing left is axles and trans/transfer)______________________________ Mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.