cast iron 4bl intake with q jet carb and good sm465 case - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1tonblaze · 11-02-2010, 08:31 PM

cleaning out the shop and stuff i dont need . the intake is off a 69 350 i think and the carb is off the same motor . carb worked great when i pulled off running truck no leaks nothing stupid probley would need a rebuild since its been sitting . the intake has been cleaned and painted black . the sm465 case is good has all the parts in it but it was left out side dont know the condition of the insides .

1tonblaze · 11-06-2010, 08:08 PM

ttt guess its worth scrap ? lol

nickp51chevy · 11-06-2010, 09:25 PM

I'm gonna guess that if would depend on the casting numbers. I just learned that some of these intakes have the same numbers as the old Corvette intakes.

In case I'm wrong here is a bump for ya.

1tonblaze · 11-07-2010, 11:16 AM

I will have to look at that . dont know much about this motor it came off of except it ran strong and didnt smoke

LANDC · 11-11-2010, 12:17 PM

I just sold a 465 for $200 CAN. Complete and in reasonable condition. Was outside and probably needed some love.

ETsC10 · 11-11-2010, 07:59 PM

Nick is correct...some of the truck intakes were the same castings
as Corvette (especially the '68 327). If yours is, top dollar can be
had on eBay or the Corvette forums if advertised as a restoration part.
However...and it's a big one...it's worth $ only if the part is not
cracked. If you haven't done it already, pull the tin off the
bottom (don't lose the pegs!!), chisel all of the crap off it and
have it magnefluxed.

I went through four before I found a good one.

BTW--even if it doesn't cross to Corvette, there's plenty of folks
restoring older engines...advertise including the casting number.

Good luck!

.

1tonblaze · 11-13-2010, 12:56 PM

its not cracked already checked it plus it came off a running good motor thats now in my blazer i just went to aluminum intake and holly carb . i will have to pull the casting numbers off it . my sm465 i have is probley only good for the case and top the tail shaft were it goes in the the tcase is stripped off i took a better look at it the other day was in the pile of blazer i baught for parts deal .

11-02-2010, 08:31 PM	#1
1tonblaze Registered User Join Date: Feb 2007 Location: Carroll County Maryland , Posts: 828	cast iron 4bl intake with q jet carb and good sm465 case cleaning out the shop and stuff i dont need . the intake is off a 69 350 i think and the carb is off the same motor . carb worked great when i pulled off running truck no leaks nothing stupid probley would need a rebuild since its been sitting . the intake has been cleaned and painted black . the sm465 case is good has all the parts in it but it was left out side dont know the condition of the insides . Attached Images __________________ 1970 k/5 blazer--> money pit - 14bolt dana 44 350 sm465/205 36 14.50 16 tires 1972 nova plane jane 6 clyinder might sell might keep dont know 2004 chevy s-10 crewcab zr5 sold 1985 c20 chevy long bed , beater , on its way to a better place in pa from what the dmv told me 2010 kia forte koup 2.4 sx -over the river and threw the woods to the total lot it went . 1999 k1500 suburban 350 vortec 4l60e leather land yacht .

11-06-2010, 08:08 PM	#2
1tonblaze Registered User Join Date: Feb 2007 Location: Carroll County Maryland , Posts: 828	Re: cast iron 4bl intake with q jet carb and good sm465 case ttt guess its worth scrap ? lol __________________ 1970 k/5 blazer--> money pit - 14bolt dana 44 350 sm465/205 36 14.50 16 tires 1972 nova plane jane 6 clyinder might sell might keep dont know 2004 chevy s-10 crewcab zr5 sold 1985 c20 chevy long bed , beater , on its way to a better place in pa from what the dmv told me 2010 kia forte koup 2.4 sx -over the river and threw the woods to the total lot it went . 1999 k1500 suburban 350 vortec 4l60e leather land yacht . Last edited by 1tonblaze; 11-06-2010 at 08:09 PM. Reason: cant spell

11-06-2010, 09:25 PM	#3
nickp51chevy Registered Chevy Owner Join Date: Aug 2008 Location: Snohomish, wa Posts: 1,557	Re: cast iron 4bl intake with q jet carb and good sm465 case I'm gonna guess that if would depend on the casting numbers. I just learned that some of these intakes have the same numbers as the old Corvette intakes. In case I'm wrong here is a bump for ya. __________________ Love is fleeting, but Chevy trucks are forever!!!! 1970 Chevy CST C10 long box 350/400 2008 Chevy Silverado short box 4x4 Had; 1951 Chevy short box 307/T5 1988 Chevy shot box 4x4 350/350 1971 Chevy C10 long box 4x4 350/350 1971 Chevy C20 long box 350/350 1971 Chevy C10 long box 350/350

11-07-2010, 11:16 AM	#4
1tonblaze Registered User Join Date: Feb 2007 Location: Carroll County Maryland , Posts: 828	Re: cast iron 4bl intake with q jet carb and good sm465 case I will have to look at that . dont know much about this motor it came off of except it ran strong and didnt smoke __________________ 1970 k/5 blazer--> money pit - 14bolt dana 44 350 sm465/205 36 14.50 16 tires 1972 nova plane jane 6 clyinder might sell might keep dont know 2004 chevy s-10 crewcab zr5 sold 1985 c20 chevy long bed , beater , on its way to a better place in pa from what the dmv told me 2010 kia forte koup 2.4 sx -over the river and threw the woods to the total lot it went . 1999 k1500 suburban 350 vortec 4l60e leather land yacht .

11-11-2010, 12:17 PM	#5
LANDC Registered User Join Date: Oct 2008 Location: Kelowna, BC, Canada Posts: 93	Re: cast iron 4bl intake with q jet carb and good sm465 case I just sold a 465 for $200 CAN. Complete and in reasonable condition. Was outside and probably needed some love. __________________ Custom Vehicle, Custom Problems.

11-11-2010, 07:59 PM	#6
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: cast iron 4bl intake with q jet carb and good sm465 case Nick is correct...some of the truck intakes were the same castings as Corvette (especially the '68 327). If yours is, top dollar can be had on eBay or the Corvette forums if advertised as a restoration part. However...and it's a big one...it's worth $ only if the part is not cracked. If you haven't done it already, pull the tin off the bottom (don't lose the pegs!!), chisel all of the crap off it and have it magnefluxed. I went through four before I found a good one. BTW--even if it doesn't cross to Corvette, there's plenty of folks restoring older engines...advertise including the casting number. Good luck! . __________________ . Forum Guidelines and Rules Buying and Selling Code of Conduct Become a Board Supporter! Truck FAQ Ellen... the boards artsy-fartsy, eclectic, truck-lovin' gal-member...

11-13-2010, 12:56 PM	#7
1tonblaze Registered User Join Date: Feb 2007 Location: Carroll County Maryland , Posts: 828	Re: cast iron 4bl intake with q jet carb and good sm465 case its not cracked already checked it plus it came off a running good motor thats now in my blazer i just went to aluminum intake and holly carb . i will have to pull the casting numbers off it . my sm465 i have is probley only good for the case and top the tail shaft were it goes in the the tcase is stripped off i took a better look at it the other day was in the pile of blazer i baught for parts deal . __________________ 1970 k/5 blazer--> money pit - 14bolt dana 44 350 sm465/205 36 14.50 16 tires 1972 nova plane jane 6 clyinder might sell might keep dont know 2004 chevy s-10 crewcab zr5 sold 1985 c20 chevy long bed , beater , on its way to a better place in pa from what the dmv told me 2010 kia forte koup 2.4 sx -over the river and threw the woods to the total lot it went . 1999 k1500 suburban 350 vortec 4l60e leather land yacht .



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.