NH FS - SM465 and Rockwell T221 / high hump cover - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JJorgensen52** · 11-06-2010, 09:51 AM

SM465 and Rockwell T221 Combo (with bellhousing, mounting brackets, front and rear driveshafts) out of a '69 K10 shortbed.

Haven't disassembled anything, but mileage is under 75k and they both worked fine, been daily driving them the last 6 months.

The bad: Not sure which, but either the tranny output shaft seal or the Tcase input shaft seal is blown. Lots of fluid leaking out of the trans-tcase adapter. Didn't bother to try and replace, used it as an excuse for an NV4500 swap.

Looking to get $200 OBO. If nothing else, lots of good hard parts between the two. Am willing to seperate as well, just make me an offer.

I also have the matching high hump if anyone is interested - it's not perfect but solid and useable.

70BLAZERX2 · 11-06-2010, 12:53 PM

how much for the high hump for rockwell shipped to 37745..

could you post pics?

**JJorgensen52** · 11-06-2010, 03:33 PM

Quote:

Originally Posted by 70BLAZERX2

how much for the high hump for rockwell shipped to 37745..

could you post pics?

I will grab a couple when I get home from work tonight.

$50 is fine.

seadonkey · 11-06-2010, 04:06 PM

IF he passes put me next in line for the high hump cover

Thanks

**JJorgensen52** · 11-07-2010, 02:05 AM

Pics as requested. There is a little surface rust but nothing that 20 minutes with a wirebrush won't fix. Good thing Rockwells leak, kept it from rusting

Patsfan34 · 11-07-2010, 10:43 AM

Do you have the original shift knob for the t/case?

70BLAZERX2 · 11-07-2010, 11:04 AM

I will pass on it.

seadonkey · 11-07-2010, 11:20 AM

HI, still interested, let me know what you would need with shipping to 54469 zip code. You can PM me with payment info, paypal works for me
Thanks

**JJorgensen52** · 11-07-2010, 02:25 PM

Quote:

Originally Posted by Patsfan34

Do you have the original shift knob for the t/case?

Yes, but it's going back on the truck

. The pattern has long since worn off, anyway

**JJorgensen52** · 11-08-2010, 07:54 AM

High Hump is sold. TTT for the SM465/T221

**JJorgensen52** · 11-22-2010, 11:50 AM

BUMP!

I will probably be seperating trans and T-case this weekend - both are a great source of hard parts!

seadonkey · 11-22-2010, 02:35 PM

Might also be interested in the 10 spline coupler if it's up for grabs? pending condition and price. Let me know
Thanks again

70BLAZERX2 · 12-26-2010, 04:30 PM

ttt for you

Toms1968 · 12-26-2010, 06:04 PM

I'm looking for a small block/ small hole Aluminum bellhousing if you have one. Shipped to 10952. Thanks, Tom.

70BLAZERX2 · 12-26-2010, 06:19 PM

I have a few bellhousings here..I will have to see if i have a small hole one..I will let you know.

**JJorgensen52** · 01-16-2011, 02:38 PM

Quote:

Originally Posted by Toms1968

I'm looking for a small block/ small hole Aluminum bellhousing if you have one. Shipped to 10952. Thanks, Tom.

Nope, only one I've got now is the large hole cast iron model. Sorry!

Toms1968 · 12-26-2010, 08:04 PM

Thanks. I'll be waiting to hear back from you.

19silverado77 · 12-02-2013, 03:46 PM

Do you still have the high hump

**JJorgensen52** · 12-06-2013, 01:12 PM

Quote:

Originally Posted by 19silverado77

Do you still have the high hump

Nope, it sold. Thanks

11-06-2010, 09:51 AM	#1
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	FS - SM465 and Rockwell T221 / high hump cover SM465 and Rockwell T221 Combo (with bellhousing, mounting brackets, front and rear driveshafts) out of a '69 K10 shortbed. Haven't disassembled anything, but mileage is under 75k and they both worked fine, been daily driving them the last 6 months. The bad: Not sure which, but either the tranny output shaft seal or the Tcase input shaft seal is blown. Lots of fluid leaking out of the trans-tcase adapter. Didn't bother to try and replace, used it as an excuse for an NV4500 swap. Looking to get $200 OBO. If nothing else, lots of good hard parts between the two. Am willing to seperate as well, just make me an offer. I also have the matching high hump if anyone is interested - it's not perfect but solid and useable. __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

11-06-2010, 12:53 PM	#2
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: FS - SM465 and Rockwell T221 / high hump cover how much for the high hump for rockwell shipped to 37745.. could you post pics?

11-06-2010, 04:06 PM	#4
seadonkey Registered User Join Date: Sep 2008 Location: Port Edwards wi Posts: 49	Re: FS - SM465 and Rockwell T221 / high hump cover IF he passes put me next in line for the high hump cover Thanks

11-07-2010, 02:05 AM	#5
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: FS - SM465 and Rockwell T221 / high hump cover Pics as requested. There is a little surface rust but nothing that 20 minutes with a wirebrush won't fix. Good thing Rockwells leak, kept it from rusting __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

11-07-2010, 10:43 AM	#6
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: FS - SM465 and Rockwell T221 / high hump cover Do you have the original shift knob for the t/case?

11-07-2010, 11:04 AM	#7
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: FS - SM465 and Rockwell T221 / high hump cover I will pass on it.

11-07-2010, 11:20 AM	#8
seadonkey Registered User Join Date: Sep 2008 Location: Port Edwards wi Posts: 49	Re: FS - SM465 and Rockwell T221 / high hump cover HI, still interested, let me know what you would need with shipping to 54469 zip code. You can PM me with payment info, paypal works for me Thanks

11-08-2010, 07:54 AM	#10
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: FS - SM465 and Rockwell T221 / high hump cover High Hump is sold. TTT for the SM465/T221 __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

11-22-2010, 11:50 AM	#11
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: FS - SM465 and Rockwell T221 / high hump cover BUMP! I will probably be seperating trans and T-case this weekend - both are a great source of hard parts! __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

11-22-2010, 02:35 PM	#12
seadonkey Registered User Join Date: Sep 2008 Location: Port Edwards wi Posts: 49	Re: FS - SM465 and Rockwell T221 / high hump cover Might also be interested in the 10 spline coupler if it's up for grabs? pending condition and price. Let me know Thanks again

12-26-2010, 04:30 PM	#13
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: FS - SM465 and Rockwell T221 / high hump cover ttt for you

12-26-2010, 06:04 PM	#14
Toms1968 Registered User Join Date: Aug 2010 Location: Airmont NY Posts: 72	Re: FS - SM465 and Rockwell T221 / high hump cover I'm looking for a small block/ small hole Aluminum bellhousing if you have one. Shipped to 10952. Thanks, Tom.

12-26-2010, 06:19 PM	#15
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: FS - SM465 and Rockwell T221 / high hump cover I have a few bellhousings here..I will have to see if i have a small hole one..I will let you know.

12-26-2010, 08:04 PM	#17
Toms1968 Registered User Join Date: Aug 2010 Location: Airmont NY Posts: 72	Re: FS - SM465 and Rockwell T221 / high hump cover Thanks. I'll be waiting to hear back from you.

12-02-2013, 03:46 PM	#18
19silverado77 Registered User Join Date: Nov 2013 Location: Tucson, Arizona Posts: 167	Re: FS - SM465 and Rockwell T221 / high hump cover Do you still have the high hump



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.