steering box interchange? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

robby · 03-03-2003, 12:31 AM

Can I use later model power steering box on a 69-70 GMC K10 that doesn't have power steering now?
Thanks

Mudder · 03-03-2003, 01:50 AM

I believe they are the same but you may run iinto problems with the rag joint splines. Some had different slpines and were different sized shafts.

robby · 03-04-2003, 12:01 AM

Thanks Mudder, would it work if I left on the rag joint from the later model box?

red450ih · 03-04-2003, 12:04 PM

Any 73-87 PS box will bolt up. Just use the rag joint that comes with the box. Somewhere around 78 they have a smaller imput shaft (where rag joint goes).

Keith

Mike C · 03-04-2003, 12:11 PM

Also, sometime in the early 80's they switched from flare fittings to o-ring fittings on the hoses. You will have to get a matching pump or change the rear fitting to match the box. (Or have custom hoses made)

robby · 03-04-2003, 09:10 PM

Thanks

03-03-2003, 12:31 AM	#1
robby Semper Fidelis Join Date: Dec 2001 Location: Cedar City, Utah Posts: 654	steering box interchange? Can I use later model power steering box on a 69-70 GMC K10 that doesn't have power steering now? Thanks __________________ 72 Chevy C 20 with 402 For sale 85 GMC K2500 83 Trans Am Cedar City, Utah (Missouri Native)

03-04-2003, 12:01 AM	#3
robby Semper Fidelis Join Date: Dec 2001 Location: Cedar City, Utah Posts: 654	Thanks Mudder, would it work if I left on the rag joint from the later model box? __________________ 72 Chevy C 20 with 402 For sale 85 GMC K2500 83 Trans Am Cedar City, Utah (Missouri Native)

03-04-2003, 12:04 PM	#4
red450ih Registered User Join Date: Mar 2001 Location: Nashville, Tennessee Posts: 225	Any 73-87 PS box will bolt up. Just use the rag joint that comes with the box. Somewhere around 78 they have a smaller imput shaft (where rag joint goes). Keith __________________ GMC

03-04-2003, 12:11 PM	#5
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,727	Also, sometime in the early 80's they switched from flare fittings to o-ring fittings on the hoses. You will have to get a matching pump or change the rear fitting to match the box. (Or have custom hoses made) __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

03-04-2003, 09:10 PM	#6
robby Semper Fidelis Join Date: Dec 2001 Location: Cedar City, Utah Posts: 654	Thanks __________________ 72 Chevy C 20 with 402 For sale 85 GMC K2500 83 Trans Am Cedar City, Utah (Missouri Native)

03-03-2003, 01:50 AM	#2
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	I believe they are the same but you may run iinto problems with the rag joint splines. Some had different slpines and were different sized shafts.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.