NE 3.73 Gears - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68C10HotRod · 11-10-2010, 09:35 PM

I'm dismantling a NON-Posi rear end & it has a decent looking set of 3.73 gears in it that I don't need. I'm going to toss the housing with carrier & gears unless someone would be interested in the gears with or without the carrier. I'm willing to take them out for $20 + shipping if anyone is interested. Don't have any pictures right now but will snap a few tomorrow if there is interest.

Hoping to scrap this by next weekend at latest so LMK.

Face of ring teeth - all the way around:

Part # & ends of ring teeth:

Pinion - all the way around:

I did find this flaw while taking the pictures. Honestly, it looks like it's been that way for years.

67_ShortFleet · 11-11-2010, 09:12 AM

shoot some pictures for me please.

68chevyfuelie · 11-11-2010, 10:48 AM

X2. Put me in line. Thanks.

68C10HotRod · 11-11-2010, 12:07 PM

Pics are up. Thanks for the interest guys. USPS would probably be cheapest but I'll ship however someone wants it. Going in sequence so Matt is 1st & has 24hrs. 68chevyfuelie is next in line.

67_ShortFleet · 11-12-2010, 09:07 AM

I am going to pass. I was not able to get ahold of my drive train guy to ask about the chip that gear.

68C10HotRod · 11-12-2010, 09:23 AM

No problem Matt. Share the pic with him if you can. If you do hear anything & want to post it feel free. I won't be offended even if it's bad news for me. Rather know myself because I don't want anyone to have any issues.

Husker · 11-14-2010, 05:24 PM

Out of a GM 12 bolt? I have a 70 4x4 with a GM 12 bolt if they will work I will take gears carrier and bearings (for part numbers). Thanks
Ron

68chevyfuelie · 11-14-2010, 06:49 PM

I'll pass too, it sounds like someone else wants the whole thing. I'd take the carrier, but the gears, in my opinion, aren't worth doing anything with. Thanks anyway.

crig39 · 11-14-2010, 10:39 PM

Quote:

Originally Posted by 68chevyfuelie

I'll pass too, it sounds like someone else wants the whole thing. I'd take the carrier, but the gears, in my opinion, aren't worth doing anything with. Thanks anyway.

I will take the gears and carrier if husker doesn't take them Carl

68C10HotRod · 11-15-2010, 02:03 AM

Quote:

Originally Posted by crig39

I will take the gears and carrier if husker doesn't take them Carl

Sounds like Husker is going to take it all but we'll confirm tomorrow. Carl, you're next in line if he doesn't so hold tight.

11-10-2010, 09:35 PM	#1
68C10HotRod Registered User Join Date: Feb 2008 Location: Omaha, NE 68144 Posts: 333	3.73 Gears I'm dismantling a NON-Posi rear end & it has a decent looking set of 3.73 gears in it that I don't need. I'm going to toss the housing with carrier & gears unless someone would be interested in the gears with or without the carrier. I'm willing to take them out for $20 + shipping if anyone is interested. Don't have any pictures right now but will snap a few tomorrow if there is interest. Hoping to scrap this by next weekend at latest so LMK. Face of ring teeth - all the way around: Part # & ends of ring teeth: Pinion - all the way around: I did find this flaw while taking the pictures. Honestly, it looks like it's been that way for years. __________________ Bryan '52 Bel Air 2dr HT - in pieces '68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed “Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin "And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery) Last edited by 68C10HotRod; 11-11-2010 at 12:04 PM. Reason: added pics

11-11-2010, 09:12 AM	#2
67_ShortFleet Registered User Join Date: May 2008 Location: Eastern Iowa Posts: 423	Re: 3.73 Gears shoot some pictures for me please. __________________ Matt Garage build http://www.garagejournal.com/forum/s...ead.php?t=6784 My slow but sure truck build http://67-72chevytrucks.com/vboard/s...d.php?t=394924 My philosophy on tires is the same as cigarettes. "smoke them if you got them" HAPPILY DIVORCED!

11-11-2010, 10:48 AM	#3
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: 3.73 Gears X2. Put me in line. Thanks.

11-11-2010, 12:07 PM	#4
68C10HotRod Registered User Join Date: Feb 2008 Location: Omaha, NE 68144 Posts: 333	Re: 3.73 Gears Pics are up. Thanks for the interest guys. USPS would probably be cheapest but I'll ship however someone wants it. Going in sequence so Matt is 1st & has 24hrs. 68chevyfuelie is next in line. __________________ Bryan '52 Bel Air 2dr HT - in pieces '68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed “Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin "And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery)

11-12-2010, 09:07 AM	#5
67_ShortFleet Registered User Join Date: May 2008 Location: Eastern Iowa Posts: 423	Re: 3.73 Gears I am going to pass. I was not able to get ahold of my drive train guy to ask about the chip that gear. __________________ Matt Garage build http://www.garagejournal.com/forum/s...ead.php?t=6784 My slow but sure truck build http://67-72chevytrucks.com/vboard/s...d.php?t=394924 My philosophy on tires is the same as cigarettes. "smoke them if you got them" HAPPILY DIVORCED!

11-12-2010, 09:23 AM	#6
68C10HotRod Registered User Join Date: Feb 2008 Location: Omaha, NE 68144 Posts: 333	Re: 3.73 Gears No problem Matt. Share the pic with him if you can. If you do hear anything & want to post it feel free. I won't be offended even if it's bad news for me. Rather know myself because I don't want anyone to have any issues. __________________ Bryan '52 Bel Air 2dr HT - in pieces '68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed “Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin "And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery)

11-14-2010, 05:24 PM	#7
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	Re: 3.73 Gears Out of a GM 12 bolt? I have a 70 4x4 with a GM 12 bolt if they will work I will take gears carrier and bearings (for part numbers). Thanks Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

11-14-2010, 06:49 PM	#8
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: 3.73 Gears I'll pass too, it sounds like someone else wants the whole thing. I'd take the carrier, but the gears, in my opinion, aren't worth doing anything with. Thanks anyway.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.