TX parting 67-72 chevy parts trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rio · 11-20-2010, 02:46 PM

parting 67-72 chevy parts trucks let me know what you need. and i'll price the part. or make me a offer.

rio · 11-20-2010, 02:47 PM

pic.

1969 stepside · 01-06-2011, 08:05 PM

Quote:

Originally Posted by rio

pic.

Do you have a desent looking right inner fender? If so, how much? I am out of Dallas so I could pick this up if the price is right.

manolo · 11-02-2012, 07:44 PM

i need the vent box where the defrost and the floor vent atach to for 1972 chevy c10 please let me know if you have it and if so what price. Thank you mario

budnikguy · 11-20-2010, 03:25 PM

are any of these 71/72 1/2 ton? I am looking for brake stuff, proportioning valve for disc/drum, brake lines, etc.

ckexswb · 11-20-2010, 04:23 PM

How about the exhaust manifold shield with tube and the top alternator bracket. shipped to 90277

MVHandy · 11-20-2010, 06:11 PM

Could use the ashtray from the Ochre and White truck. I will offer $15 including shipping to 08816

1956cameo · 11-20-2010, 06:20 PM

Do the trucks have the original rims? I need three 5 lug 15x6 rims; and five six lug 15x6 rims. Let me know what you would want for the rims. If the price sounds good I could pick the rims up in the next week or two.

Also I would like to get in line for the breather set up (base and tube going to exhaust, and exhaust) in the second picture. Also I am interested in the distributor, alternator brackets, throttle linkage, water pump pulley, and probably other little things in the second pic pending price. I also need a complete set of original A/C brackets if any of your trucks have them pending price. I will look and see what other little parts that I may need that I could buy if I go up to Brenham for the other stuff.

rio · 11-20-2010, 08:09 PM

1956cameo;4304936]Do the trucks have the original rims? I need three 5 lug 15x6 rims; and five six lug 15x6 rims. Let me know what you would want for the rims. If the price sounds good I could pick the rims up in the next week or two.

Also I would like to get in line for the breather set up (base and tube going to exhaust, and exhaust) in the second picture. Also I am interested in the distributor, alternator brackets, throttle linkage, water pump pulley, and probably other little things in the second pic pending price. I also need a complete set of original A/C brackets if any of your trucks have them pending price. I will look and see what other little parts that I may need that I could buy if I go up to Brenham for the other stuff.

I'll check as soon as I can.

rio · 11-20-2010, 07:59 PM

How about the exhaust manifold shield with tube and the top alternator bracket. shipped to 90277

I'll check as soon as I can.

rio

rio · 11-24-2010, 12:40 AM

How about the exhaust manifold shield with tube and the top alternator bracket. shipped to 90277

I have the tube and the top alternator bracket. hows $38 shipped. are make me a offer the exhaust manifold shield is no good.

rio · 11-20-2010, 07:49 PM

are any of these 71/72 1/2 ton? I am looking for brake stuff, proportioning valve for disc/drum, brake lines, etc.]

I'll check tuesday

budnikguy · 11-30-2010, 03:38 PM

any update on these parts?? thanks

Quote:

Originally Posted by rio

are any of these 71/72 1/2 ton? I am looking for brake stuff, proportioning valve for disc/drum, brake lines, etc.]

I'll check tuesday

Fesser · 11-20-2010, 04:23 PM

How about a working heater control setup (without AC) that would work in a 72 ...and the screws that go through the top of the inside of the door into the bottom of the wing window on the 72 (there is one on each side)...and the little plastic things the screws go through if it has those (might only be on Blazers, I don't know). To 94559

rio · 11-20-2010, 07:56 PM

How about a working heater control setup (without AC) that would work in a 72 ...and the screws that go through the top of the inside of the door into the bottom of the wing window on the 72 (there is one on each side)...and the little plastic things the screws go through if it has those (might only be on Blazers, I don't know). To 94559

I have one heater control . no broken levers.

I'll check on the screws.

rio · 11-24-2010, 12:45 AM

How about a working heater control setup (without AC) that would work in a 72 ...and the screws that go through the top of the inside of the door into the bottom of the wing window on the 72 (there is one on each side)...and the little plastic things the screws go through if it has those (might only be on Blazers, I don't know). To 94559

sorry the heater control setup and the screws are no good.

Rio

vanceman · 11-20-2010, 06:22 PM

Got any good doors???

rio · 11-20-2010, 08:09 PM

Got any good doors???

no.

raider65 · 11-20-2010, 07:37 PM

Looking for a brake booster for a 1/2 as well put me in line..also the blue grill bowtie pending price and condition and the yellow AC vents

rio · 11-20-2010, 08:10 PM

Looking for a brake booster for a 1/2 as well put me in line..also the blue grill bowtie pending price and condition and the yellow AC vents

I'll check as soon as I can.

rio · 11-20-2010, 07:57 PM

Anyone interested can make an offer & we'll go from there.
Rio

**nightmare** · 11-20-2010, 10:52 PM

got any 5-lug 3.73 posi axles?

rio · 11-21-2010, 12:17 AM

got any 5-lug 3.73 posi axles?

no.

jmedero · 11-20-2010, 10:58 PM

Looking for front bumpers 67-70. Painted or chrome.
Posted via Mobile Device

*Puropedo* · 11-20-2010, 11:55 PM

Hows the driver side fender on the ochre/white truck?

11-20-2010, 02:46 PM	#1
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	parting 67-72 chevy parts trucks parting 67-72 chevy parts trucks let me know what you need. and i'll price the part. or make me a offer. Attached Images __________________ 1970 1/2 ton swb

11-20-2010, 02:47 PM	#2
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks pic. Attached Images __________________ 1970 1/2 ton swb

11-02-2012, 07:44 PM	#4
manolo Registered User Join Date: Jun 2012 Location: mcallen tx Posts: 1	Re: parting 67-72 chevy parts trucks i need the vent box where the defrost and the floor vent atach to for 1972 chevy c10 please let me know if you have it and if so what price. Thank you mario

11-20-2010, 03:25 PM	#5
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: parting 67-72 chevy parts trucks are any of these 71/72 1/2 ton? I am looking for brake stuff, proportioning valve for disc/drum, brake lines, etc.

11-20-2010, 04:23 PM	#6
ckexswb 67-72=-5 Join Date: Jun 2007 Location: calif/ beach Posts: 807	Re: parting 67-72 chevy parts trucks How about the exhaust manifold shield with tube and the top alternator bracket. shipped to 90277

11-20-2010, 06:11 PM	#7
MVHandy Registered User Join Date: Jun 2009 Location: East Brunswick, NJ Posts: 70	Re: parting 67-72 chevy parts trucks Could use the ashtray from the Ochre and White truck. I will offer $15 including shipping to 08816

11-20-2010, 06:20 PM	#8
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: parting 67-72 chevy parts trucks Do the trucks have the original rims? I need three 5 lug 15x6 rims; and five six lug 15x6 rims. Let me know what you would want for the rims. If the price sounds good I could pick the rims up in the next week or two. Also I would like to get in line for the breather set up (base and tube going to exhaust, and exhaust) in the second picture. Also I am interested in the distributor, alternator brackets, throttle linkage, water pump pulley, and probably other little things in the second pic pending price. I also need a complete set of original A/C brackets if any of your trucks have them pending price. I will look and see what other little parts that I may need that I could buy if I go up to Brenham for the other stuff. __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry Last edited by 1956cameo; 11-20-2010 at 06:46 PM.

11-20-2010, 08:09 PM	#9
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks 1956cameo;4304936]Do the trucks have the original rims? I need three 5 lug 15x6 rims; and five six lug 15x6 rims. Let me know what you would want for the rims. If the price sounds good I could pick the rims up in the next week or two. Also I would like to get in line for the breather set up (base and tube going to exhaust, and exhaust) in the second picture. Also I am interested in the distributor, alternator brackets, throttle linkage, water pump pulley, and probably other little things in the second pic pending price. I also need a complete set of original A/C brackets if any of your trucks have them pending price. I will look and see what other little parts that I may need that I could buy if I go up to Brenham for the other stuff. I'll check as soon as I can. __________________ 1970 1/2 ton swb

11-20-2010, 07:59 PM	#10
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks How about the exhaust manifold shield with tube and the top alternator bracket. shipped to 90277 I'll check as soon as I can. rio __________________ 1970 1/2 ton swb

11-24-2010, 12:40 AM	#11
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks How about the exhaust manifold shield with tube and the top alternator bracket. shipped to 90277 I have the tube and the top alternator bracket. hows $38 shipped. are make me a offer the exhaust manifold shield is no good. Attached Images __________________ 1970 1/2 ton swb

11-20-2010, 07:49 PM	#12
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks are any of these 71/72 1/2 ton? I am looking for brake stuff, proportioning valve for disc/drum, brake lines, etc.] I'll check tuesday __________________ 1970 1/2 ton swb

11-20-2010, 04:23 PM	#14
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: parting 67-72 chevy parts trucks How about a working heater control setup (without AC) that would work in a 72 ...and the screws that go through the top of the inside of the door into the bottom of the wing window on the 72 (there is one on each side)...and the little plastic things the screws go through if it has those (might only be on Blazers, I don't know). To 94559

11-20-2010, 07:56 PM	#15
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks How about a working heater control setup (without AC) that would work in a 72 ...and the screws that go through the top of the inside of the door into the bottom of the wing window on the 72 (there is one on each side)...and the little plastic things the screws go through if it has those (might only be on Blazers, I don't know). To 94559 I have one heater control . no broken levers. I'll check on the screws. __________________ 1970 1/2 ton swb

11-24-2010, 12:45 AM	#16
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks How about a working heater control setup (without AC) that would work in a 72 ...and the screws that go through the top of the inside of the door into the bottom of the wing window on the 72 (there is one on each side)...and the little plastic things the screws go through if it has those (might only be on Blazers, I don't know). To 94559 sorry the heater control setup and the screws are no good. Rio __________________ 1970 1/2 ton swb

11-20-2010, 06:22 PM	#17
vanceman Registered User Join Date: Mar 2009 Location: Central Texas Posts: 140	Re: parting 67-72 chevy parts trucks Got any good doors???



Register or Log In To remove these advertisements.

11-20-2010, 07:37 PM	#19
raider65 Registered User Join Date: Sep 2010 Location: Brownsville, Texas Posts: 240	Re: parting 67-72 chevy parts trucks Looking for a brake booster for a 1/2 as well put me in line..also the blue grill bowtie pending price and condition and the yellow AC vents __________________ It's not rust...It's character!

11-20-2010, 08:10 PM	#20
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks Looking for a brake booster for a 1/2 as well put me in line..also the blue grill bowtie pending price and condition and the yellow AC vents I'll check as soon as I can. __________________ 1970 1/2 ton swb

11-20-2010, 07:57 PM	#21
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks Anyone interested can make an offer & we'll go from there. Rio __________________ 1970 1/2 ton swb

11-21-2010, 12:17 AM	#23
rio Junior Member Join Date: Sep 2007 Location: Brenham,TX Posts: 571	Re: parting 67-72 chevy parts trucks got any 5-lug 3.73 posi axles? no. __________________ 1970 1/2 ton swb

11-20-2010, 10:58 PM	#24
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: parting 67-72 chevy parts trucks Looking for front bumpers 67-70. Painted or chrome. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

11-20-2010, 11:55 PM	#25
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: parting 67-72 chevy parts trucks Hows the driver side fender on the ochre/white truck?

Register or Log In To remove these advertisements.