CA Parting 3/4ton 2wd Big Block Truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 11-20-2010, 10:25 PM

This is a great running truck that was wrecked in the driver front and bent the frame. I will be using the ac stuff, carpet, vent windows, and dash pad for my 4x4 build. The back end will be made into a trailer.

454 engine low miles, great runner $500 local
TH400 drives great $250 local
AC brackets $250 shipped
complete big block power steering $150 shipped
crank/water pump pulleys $80 shipped
alt brackets $90 shipped
exhaust manifolds $75 shipped
th400 kick down switch $36 shipped
auto steering column $60 plus shipping
steering wheel $52 shipped
motor stands/mounts $110 shipped
bare cab with current CA reg/title...pretty clean cab, but not a good job on rocker rust repair $300
16" wheels with tires with some life left $100
I will be parting out this truck Tues, Wed. Please reply in thread to avoid confusion. Thanks, Ray

KrazyRay · 11-20-2010, 10:28 PM

pics

KrazyRay · 11-20-2010, 10:29 PM

1234

**too much stuff** · 11-20-2010, 10:48 PM

Does the th400 kick down include all parts? Price on emblems also. Thanks.

Fesser · 11-20-2010, 11:56 PM

Ray, you should hide this stuff before I come for the 5 lug rims on Tuesday. Frank

tanman722001 · 11-21-2010, 12:44 AM

what would you want for the sill plates?

KrazyRay · 11-21-2010, 02:01 AM

Eric- the kick down includes switch, bracket, and wires (don't know cond.) to the trans. $40 shipped on the emblems.

Frank- I hope you enjoy the buffet of parts!

tanman- the sills were painted black

$20 shipped.

Thanks, Ray

**too much stuff** · 11-21-2010, 12:10 PM

Quote:

Originally Posted by KrazyRay

Eric- the kick down includes switch, bracket, and wires (don't know cond.) to the trans. $40 shipped on the emblems.

Frank- I hope you enjoy the buffet of parts!

tanman- the sills were painted black

$20 shipped.

Thanks, Ray

Ray, can you let me know when it is pulled and verify the condition? (kick down parts) I will pass on the emblems for now. Thanks. Eric

vasquezmrysvll · 11-21-2010, 12:49 PM

ill take the windshield, just let me know when its out and i could pick it up. thanks -art

KrazyRay · 11-24-2010, 10:46 PM

Quote:

Originally Posted by too much stuff

Ray, can you let me know when it is pulled and verify the condition? (kick down parts) I will pass on the emblems for now. Thanks. Eric

There is one cut wire on the kickdown.

**tll74** · 11-25-2010, 12:05 AM

I'll do some research to find out. Is the engine still available? Thanks

tanman722001 · 11-25-2010, 11:02 AM

Quote:

Originally Posted by KrazyRay

Eric- the kick down includes switch, bracket, and wires (don't know cond.) to the trans. $40 shipped on the emblems.

Frank- I hope you enjoy the buffet of parts!

tanman- the sills were painted black

$20 shipped.

Thanks, Ray

Can you post some pics of them?Thanks Tony

**tll74** · 11-26-2010, 12:38 AM

Ray,
What does the engine come with? Such as carb, dist, ex.manifolds, flywheel, mounts, pulleys, water pump, etc. Thanks

KrazyRay · 11-26-2010, 12:58 AM

55454- sorry, no hanger

tanman- will get pics, but they look bad and the pitting shows through

tll74- long block with intake, flywheel, dist., water pump, and valve covers

Thanks, Ray

70LonghornCST · 11-21-2010, 02:25 AM

Hi, Ray! Your SPID is on the way.

Also, I am needing a couple of very small item from this truck. I need the bolt that hold the A/C Muffler to the A/C compressor.

Also, I need the little bracket that holds the front part of the muffler to the front part of the compressor area.

How much shipped to 95355?

Thanks!

Richard

vasquezmrysvll · 11-21-2010, 03:16 AM

how are things ray? hows the front glass look on it? -art

KrazyRay · 11-21-2010, 09:04 AM

Richard- I want to keep this ac stuff complete for my 4x4 build...This is a working system.
I will check my parts stash to see if I have those pieces for you.

Art- The windshield has a wiper arm scrape, but no cracks. $25

Thanks, Ray

70LonghornCST · 11-21-2010, 03:11 PM

Quote:

Originally Posted by KrazyRay

Richard- I want to keep this ac stuff complete for my 4x4 build...This is a working system.
I will check my parts stash to see if I have those pieces for you.

Art- The windshield has a wiper arm scrape, but no cracks. $25

Thanks, Ray

No problem...totally understandable. Is it OK if I use the pic of yours that I made notes on to post a want add?

KrazyRay · 11-21-2010, 04:34 PM

Eric- you are first in line on kick down... will pull by Wed.
Art- I can drop the windshield by your place Wed. night
gmc1971harwich- these are car mirrors $21 shipped
daddymoo2- 2nd in line on kick down
FriscoDave- stands/mounts are yours pm sent
Richard- no problem

Thanks, Ray

gmc1971harwich · 11-21-2010, 01:22 PM

how much for the chrome mirrors and hardware shipping to 02645

**daddymoo2** · 11-21-2010, 01:52 PM

Ray, I will take the kick down switch set up. Let me know final price with shipping to 41091 will pay with pay pal. Thanks Don

FriscoDave · 11-21-2010, 02:06 PM

I'll take the motor stands and mounts. Thanks Ray.

ConnDemned · 11-22-2010, 01:10 AM

Any idea the shape/condition of the p.s. set up?
Posted via Mobile Device

KrazyRay · 11-22-2010, 01:18 AM

Quote:

Originally Posted by ConnDemned

Any idea the shape/condition of the p.s. set up?
Posted via Mobile Device

It is a good working system...I haven't checked to see if it has the typical JB Weld on the hose area.
Thanks, Ray

ConnDemned · 11-22-2010, 11:30 PM

Quote:

Originally Posted by KrazyRay

It is a good working system...I haven't checked to see if it has the typical JB Weld on the hose area.
Thanks, Ray

When you get a chance let me know, looking for a set without the jb weld fixes. No big hurry, not really to that point of the project yet but don't want to miss out on a deal.
Posted via Mobile Device

11-20-2010, 10:25 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting 3/4ton 2wd Big Block Truck This is a great running truck that was wrecked in the driver front and bent the frame. I will be using the ac stuff, carpet, vent windows, and dash pad for my 4x4 build. The back end will be made into a trailer. 454 engine low miles, great runner $500 local TH400 drives great $250 local AC brackets $250 shipped complete big block power steering $150 shipped crank/water pump pulleys $80 shipped alt brackets $90 shipped exhaust manifolds $75 shipped th400 kick down switch $36 shipped auto steering column $60 plus shipping steering wheel $52 shipped motor stands/mounts $110 shipped bare cab with current CA reg/title...pretty clean cab, but not a good job on rocker rust repair $300 16" wheels with tires with some life left $100 I will be parting out this truck Tues, Wed. Please reply in thread to avoid confusion. Thanks, Ray Attached Images

11-20-2010, 10:28 PM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 3/4ton 2wd Big Block Truck pics Attached Images

11-20-2010, 10:29 PM	#3
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 3/4ton 2wd Big Block Truck 1234 Attached Images

11-20-2010, 10:48 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,717	Re: Parting 3/4ton 2wd Big Block Truck Does the th400 kick down include all parts? Price on emblems also. Thanks. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-20-2010, 11:56 PM	#5
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: Parting 3/4ton 2wd Big Block Truck Ray, you should hide this stuff before I come for the 5 lug rims on Tuesday. Frank

11-21-2010, 12:44 AM	#6
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: Parting 3/4ton 2wd Big Block Truck what would you want for the sill plates? __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

11-21-2010, 02:01 AM	#7
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 3/4ton 2wd Big Block Truck Eric- the kick down includes switch, bracket, and wires (don't know cond.) to the trans. $40 shipped on the emblems. Frank- I hope you enjoy the buffet of parts! tanman- the sills were painted black $20 shipped. Thanks, Ray

11-21-2010, 12:49 PM	#9
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: Parting 3/4ton 2wd Big Block Truck ill take the windshield, just let me know when its out and i could pick it up. thanks -art __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

11-25-2010, 12:05 AM	#11
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting 3/4ton 2wd Big Block Truck I'll do some research to find out. Is the engine still available? Thanks __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

11-26-2010, 12:38 AM	#13
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting 3/4ton 2wd Big Block Truck Ray, What does the engine come with? Such as carb, dist, ex.manifolds, flywheel, mounts, pulleys, water pump, etc. Thanks __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

11-26-2010, 12:58 AM	#14
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 3/4ton 2wd Big Block Truck 55454- sorry, no hanger tanman- will get pics, but they look bad and the pitting shows through tll74- long block with intake, flywheel, dist., water pump, and valve covers Thanks, Ray

11-21-2010, 02:25 AM	#15
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Parting 3/4ton 2wd Big Block Truck Hi, Ray! Your SPID is on the way. Also, I am needing a couple of very small item from this truck. I need the bolt that hold the A/C Muffler to the A/C compressor. Also, I need the little bracket that holds the front part of the muffler to the front part of the compressor area. How much shipped to 95355? Thanks! Richard Attached Images __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

11-21-2010, 03:16 AM	#16
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: Parting 3/4ton 2wd Big Block Truck how are things ray? hows the front glass look on it? -art __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

11-21-2010, 09:04 AM	#17
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 3/4ton 2wd Big Block Truck Richard- I want to keep this ac stuff complete for my 4x4 build...This is a working system. I will check my parts stash to see if I have those pieces for you. Art- The windshield has a wiper arm scrape, but no cracks. $25 Thanks, Ray

11-21-2010, 04:34 PM	#19
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 3/4ton 2wd Big Block Truck Eric- you are first in line on kick down... will pull by Wed. Art- I can drop the windshield by your place Wed. night gmc1971harwich- these are car mirrors $21 shipped daddymoo2- 2nd in line on kick down FriscoDave- stands/mounts are yours pm sent Richard- no problem Thanks, Ray



Register or Log In To remove these advertisements.

11-21-2010, 01:22 PM	#20
gmc1971harwich Registered User Join Date: Nov 2008 Location: Cape cod, ma. Posts: 394	Re: Parting 3/4ton 2wd Big Block Truck how much for the chrome mirrors and hardware shipping to 02645

11-21-2010, 01:52 PM	#21
daddymoo2 Senior Member Join Date: Mar 2010 Location: union,ky Posts: 1,559	Re: Parting 3/4ton 2wd Big Block Truck Ray, I will take the kick down switch set up. Let me know final price with shipping to 41091 will pay with pay pal. Thanks Don

11-21-2010, 02:06 PM	#22
FriscoDave Registered User Join Date: Dec 2008 Location: Frisco, CA. Posts: 68	Re: Parting 3/4ton 2wd Big Block Truck I'll take the motor stands and mounts. Thanks Ray.

11-22-2010, 01:10 AM	#23
ConnDemned Registered User Join Date: Jul 2005 Location: Spanaway, WA Posts: 103	Re: Parting 3/4ton 2wd Big Block Truck Any idea the shape/condition of the p.s. set up? Posted via Mobile Device

Register or Log In To remove these advertisements.