Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
12-01-2010, 03:25 PM | #1 |
Registered User
Join Date: Feb 2009
Location: Savannah GA
Posts: 505
|
Hidden Hitch w/ Boyd Rear tank
Does anyone have a picture or info on installing a hidden hitch with a Dave Boyd rear mounted fuel tank? I bought a Boyd tank and am ready to install but also want to install a hidden hitch. Looking for ideas.
Any pictures of any rear mounted tank and hidden hitch? |
12-01-2010, 03:42 PM | #2 |
Registered User
Join Date: Oct 2009
Location: canton ga
Posts: 12,724
|
Re: Hidden Hitch w/ Boyd Rear tank
Where are you buying the hidden hitch from ? I cant find one on the east side of the country ,trying to save on shipping . I cant answer your question as my tank is still in the cab .
|
12-01-2010, 04:36 PM | #3 |
Registered User
Join Date: Feb 2009
Location: Savannah GA
Posts: 505
|
Re: Hidden Hitch w/ Boyd Rear tank
|
12-01-2010, 05:18 PM | #4 |
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
|
Re: Hidden Hitch w/ Boyd Rear tank
I saw in one of their GB's someone asked that and Dave said IDK, so here is what I say. Since the tank bolts to the bottom of the frame and doesnt have mounting holes(I think), I would mount the tank and then put the hitch up there and drill the holes, you would probably need to get longer bolts and it might be a challenge to tighten the bolts once it is all on but I bet it can be done no problem.
I also heard that you can put the tank on the top of the bottom part of the frame rail but the vent might interfere with the bed.
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 support our troops! |
12-01-2010, 05:37 PM | #5 |
Registered User
Join Date: Feb 2009
Location: Savannah GA
Posts: 505
|
Re: Hidden Hitch w/ Boyd Rear tank
I agree... however my concern is sandwiching the aluminum flange for the tank in between the steel frame and the steel hitch. I just want to make sure the soft aluminum doesn't deform over time... especially with a load being applied to the hitch.
|
12-01-2010, 05:40 PM | #6 |
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
|
Re: Hidden Hitch w/ Boyd Rear tank
I think the flanges for the tank are made out of some pretty thick stuff, I would call Dave and ask him his .02 on that and worse case I would see about putting the tank on the inside of the rail.
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 support our troops! |
Bookmarks |
|
|