Indepent Front Suspension by Scott's H R

[solidaxel]

Just a quick note about Justins IFS kit from Scotts Hot Rod & Customs.

We picked up ALL the parts from Justin as PROMISED from the G G show in Scottsdale and let me tell you they are quality parts, and HEAVY DUTY!!

For the first time builders this IFS kit is as simple as reading a level and a tape measure you will be surprised how easy this kit is to install.

This will be the third type of IFS I will be using, the first one is on my 55 GMC is a Mll, and it has been a daily driver since 1993 wore out once and replaced all the used up pieces.

The next one is the Dodge Dakota which is on my 53, with 1500 miles it is heavy duty and rides and feels much better than the Mll kit I have on my 55 GMC. Both of these trucks have Bilstine shocks on all four corners and I can feel the diference in the ride and handeling, with the Dodge suspension, being a better handeling truck.

The extended cab truck that has the Scott's kit is a ways from being on the road but I will keep you all posted as to the progress.

Pics to follow, (I forgot the camera) yesterday

[72Mountaineer]

Is there a build thread that tells about the Dodge front end? I just bought a '53 and am looking for something better than stock. Thanks.

[solidaxel]

I would look at Scotts first if you are going to put a lot of miles on your truck

[solidaxel]

Crossmember in place and a few of the MANY components that go with the kit.

[bajabob]

looks like a cool build.... Curious how easy the front end is to put together?? Will be watching...

[63 & 64 Bowties]

Originally Posted by bajabob

looks like a cool build.... Curious how easy the front end is to put together?? Will be watching...

Instructions: http://www.scottshotrods.com/IFSSystem.asp

[cajundragger]

apparently preferred vendors are heavily guarded. Got to keep them happy or they may not keep paying $$ to the site!

[solidaxel]

Originally Posted by bajabob

looks like a cool build.... Curious how easy the front end is to put together?? Will be watching...

They only fit in one place!!

[fabguy]

Originally Posted by solidaxel

They only fit in one place!!

So it looks like with that Scott's HR package, that you are VERY VERY limited to engine placement? is this true?

[upon1]

I have always heard nothing but good things about their parts,I am still waiting for my scotts ifs and 4link to get here and this is not what I want to be hearing.
Posted via Mobile Device

[N2TRUX]

Your post was reported as abusive and I responded accordingly. If you have an issue with a vendor, address it where it belongs rather than in someones post. If you have a concern with my performance, please contact Josh the site owner.

[skidmark]

I'm a new kid on the block here. I'm use to putting together bagged old caddys, but I just got off the phone a few hours back with Justin and was very impressed with how much time he took with me and walking me thru the install. I will be ordering a front and back kit. Thanks again Justin

[72Mountaineer]

Does Scotts have an IFS for my '53?

[Scottshotrods]

Originally Posted by 72Mountaineer

Does Scotts have an IFS for my '53?

Yes we do if you would like more info send us a e-mail at
justin@scottshotrods,com
jonm@scottshotrods.com
We will take care of you!

[solidaxel]

Originally Posted by 72Mountaineer

Does Scotts have an IFS for my '53?

This is a 53 chassis we are putting this Scotts IFS on, I am sure he has another one for you!!

[CHIZZLER]

Here are some pics of my scotts kit for my 53 suburban.hope this helps.LOOK AT THE QUALITY.

[S10Fan]

Originally Posted by CHIZZLER

Here are some pics of my scotts kit for my 53 suburban.hope this helps.LOOK AT THE QUALITY.

With a little more practice his welds will look pretty good.



Wow! Those look awesome!

[tech@scottshotrods]

I worked for air ride/ ride tech for some time, recently I decided to make the move to work for scotts. Now I left air ride on good terms and would not have made the move to a company I did not believe in. justin takes alot of pride in the work we do and customers satisfaction I have seen him on countless occasions now remember every thing about a customer just by there name which is rather impressive expecially as busy as justin is. If there are any concerns or issues I assure you we handle them all accordingly. Please feel free to email or call us any time.
Jonm@scottshotrods.com
Justin@scottshotrods.com
(805) 485-0382
Posted via Mobile Device

[Scottshotrods]

Just called our customer and asked him on the motor mounts and Yes the bushing part
of the mount is about 1 1/8 off the inside of the frame.The d-tabs will work when they
are trimmed.I also gave our customer the option if he would like a shorter mount this
would not be a problem at all.Our customer will let us know on that if he does.Bottom
line we will help any of our customers all the time with our products.
Justin

[fabguy]

Originally Posted by Scottshotrods

Just called our customer and asked him on the motor mounts and Yes the bushing part
of the mount is about 1 1/8 off the inside of the frame.The d-tabs will work when they
are trimmed.I also gave our customer the option if he would like a shorter mount this
would not be a problem at all.Our customer will let us know on that if he does.Bottom
line we will help any of our customers all the time with our products.
Justin

oh ok, so there is a shorter mount for these, cool and is the inside of the frame blocked in to make it easier to weld the engine mounts too?. I am waiting until the first of the year to decide what route I am going w/ my other project (53 burban).

[CHIZZLER]

Take a look at my build.motor mounts were easily trimmed to fit perfect.(53 burban barn find)

[hotrodjoe1952]

i am very amazed at all of this and enjoying it much, not sure of the direction for my build yet but this info on this thread has opened a new set of ideas, thanks for the info guys.