Removing the sun visor from the arm - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mgkgmc · 12-09-2010, 10:33 PM

Is there an easy way to remove the visor from the arm to replace it with a good arm off of an extra visor that I have? Can it be done without damaging it or can it be done ? thanks

72smoker · 12-09-2010, 10:41 PM

All I did to remove mine was hold on to the rod and move the visor part back and forth until it pulled off. Do yours have any type of glue on them? They should come off if they aren't glued.

67Slider · 12-10-2010, 06:14 PM

Quote:

Originally Posted by 72smoker

All I did to remove mine was hold on to the rod and move the visor part back and forth until it pulled off. Do yours have any type of glue on them? They should come off if they aren't glued.

I did the same thing with my 67. I didn't have any problems with installing the new visors. You just have to move them back and forth and apply pressure to get it to go on. And Yeah, it was just as hard to put on as the one I took off.

ChevLoRay · 12-10-2010, 06:55 PM

Probably easier if the rod is still screwed to the cab.....

coop34 · 12-10-2010, 07:05 PM

Mine was ridiculous to get on/off. I used some graphite lube which helped a little, but I still had to twist it back and forth for what seemed like forever! I heard dielectric grease helps lube the rods up as well. Good luck!

mgkgmc · 12-09-2010, 10:52 PM

Did you have any issues installing it on a new arm? Was it as tight as the old one when you replaced it?

12-09-2010, 10:33 PM	#1
mgkgmc Registered User Join Date: Dec 2007 Location: Glendale Arizona Posts: 1,354	Removing the sun visor from the arm Is there an easy way to remove the visor from the arm to replace it with a good arm off of an extra visor that I have? Can it be done without damaging it or can it be done ? thanks

12-09-2010, 10:41 PM	#2
72smoker Registered User Join Date: Jul 2010 Location: CR IA Posts: 160	Re: Removing the sun visor from the arm All I did to remove mine was hold on to the rod and move the visor part back and forth until it pulled off. Do yours have any type of glue on them? They should come off if they aren't glued.

12-10-2010, 06:55 PM	#4
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Removing the sun visor from the arm Probably easier if the rod is still screwed to the cab..... __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

12-10-2010, 07:05 PM	#5
coop34 Registered User Join Date: Sep 2009 Location: Visalia, CA Posts: 247	Re: Removing the sun visor from the arm Mine was ridiculous to get on/off. I used some graphite lube which helped a little, but I still had to twist it back and forth for what seemed like forever! I heard dielectric grease helps lube the rods up as well. Good luck!

12-09-2010, 10:52 PM	#6
mgkgmc Registered User Join Date: Dec 2007 Location: Glendale Arizona Posts: 1,354	Re: Removing the sun visor from the arm Did you have any issues installing it on a new arm? Was it as tight as the old one when you replaced it?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.