??? About Vortec Swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hjalbert · 03-07-2003, 03:44 PM

Are the push rods different then what came in the vortec engine then what came in our engines? If they are different, which ones should i use with my motor? (vortec heads on a 75 350)

Mixup · 03-07-2003, 03:58 PM

I put Vortec heads on my 350 crate motor and used the same push rods.

Blazer1970 · 03-07-2003, 04:47 PM

You can use the same pushrods.

Project1970 · 03-07-2003, 08:10 PM

As if it needed to be said again...you can use the same pushrods.

72chevyLWB · 03-07-2003, 09:07 PM

yeah, sure what they said. What intake did you want to run. I have a Vortec Performer intake that I need to sell. I am going with the Performer RPM Air Gap intake now. Let me know if you are interested.

68 Suburban · 03-08-2003, 09:49 AM

What intake and head gaskets should be used?

72chevyLWB · 03-08-2003, 02:49 PM

use the regular Vortec head intake gaskets. Then pick out an Edelbrock intake. Performer, Performer RPM, Performer RPM Air Gap. Depends on where you use your power.

03-07-2003, 03:44 PM	#1
hjalbert cracker Join Date: Sep 2001 Location: Wilmington, NC Posts: 1,021	??? About Vortec Swap Are the push rods different then what came in the vortec engine then what came in our engines? If they are different, which ones should i use with my motor? (vortec heads on a 75 350) __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Harry John Albert III located in Phoenix, AZ 1972 GMC JIMMY, 1969 lwb Chevy Frame, 1999 bmw k1200 ltc 1992 Kawasaki concours 1991 bmw k75 1973 cortez motorhome

03-07-2003, 03:58 PM	#2
Mixup Registered User Join Date: Jan 2002 Location: Henderson, NV Posts: 358	I put Vortec heads on my 350 crate motor and used the same push rods. __________________ 1980 Chevy Shortbed Pickup 1969 Z28 engine Turbo 350

03-07-2003, 04:47 PM	#3
Blazer1970 Registered User Join Date: Dec 1999 Location: Old Mission, MI, USA Posts: 2,507	You can use the same pushrods. __________________ Tim

03-07-2003, 08:10 PM	#4
Project1970 14.1 @ 96MPH Join Date: Jul 2001 Location: Mesa, AZ Posts: 2,811	As if it needed to be said again...you can use the same pushrods. __________________ Project1970 - LS1 Swap Complete!

03-07-2003, 09:07 PM	#5
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	yeah, sure what they said. What intake did you want to run. I have a Vortec Performer intake that I need to sell. I am going with the Performer RPM Air Gap intake now. Let me know if you are interested. __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.

03-08-2003, 09:49 AM	#6
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	What intake and head gaskets should be used?

03-08-2003, 02:49 PM	#7
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	use the regular Vortec head intake gaskets. Then pick out an Edelbrock intake. Performer, Performer RPM, Performer RPM Air Gap. Depends on where you use your power. __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.