any ideas what i should do with this mess? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fink64 · 12-20-2010, 08:54 PM

just wondering if any body had any thoughts about this big @$$ radio hole i ordered a radio delete plate dont think thats going to work thinking about getting a dash repair panel just dont know much about them if any body has any pics of this installed that would be great and was wondering if that had to be welded in or if there are any other options. you cant tell in pic but the smaller hole is also a big dent
thanks

SCOTI · 12-20-2010, 08:59 PM

Get a patch panel from another dash & weld it in or weld in a flush filler plate over the opening.

65Gregg · 12-20-2010, 09:11 PM

That hurts my eyes, good luck.

DRUMWAGON · 12-20-2010, 09:14 PM

I would install a plate and some gages to cover the hole. Rather listen to my engine run!

k1rodeoboater · 12-20-2010, 09:26 PM

Patch panel as others have said...or if you are completely opposed to welding I'd do the guages idea.

fink64 · 12-20-2010, 09:36 PM

there use to be gauges there but bought a gauge cluster to but them back where they belong. would cutting up a dash and welding that piece in be beter than buying a dash repair kit

k1rodeoboater · 12-20-2010, 09:40 PM

6 in one hand...half dozen in the other. Just my opinion but if you have a dash availible to cut, and it's in good shape...why not just put that dash in instead and save yourself the trouble of having to weld on a very visible surface....then agian I suck at welding....sooooo....yeah

**Captainfab** · 12-21-2010, 12:11 AM

I would repair that with one of the patch panels that are available, unless you have access to a good factory dash. Typically they are welded in, but you could flange the edges and use the 3M panel adhesive. However the dispensing gun for the panel adhesive is spendy. If you know someone in the auto body business, you may be able to borrow one. Keep in mind that you don't have to use the whole patch panel. You can cut them down and use only what you need.

fink64 · 12-21-2010, 09:13 PM

well thanks for the ideas it looks like i have a decision to make and soon its getting painted in jan
if any one else wants to chime in please do

jimmydean · 12-21-2010, 09:18 PM

Install a flat screen?

fryco · 12-21-2010, 09:23 PM

Quote:

Originally Posted by jimmydean

Install a flat screen?

YEAH, YOU SHOULD BE ABLE TO GET A 37-40" IN THAT HOLE!!!

JUST KIDDING

fink64 · 12-21-2010, 09:30 PM

i just bought a new 32 ill give it a try may have to trim it out to cover the hole lol

LT1 Burb · 12-21-2010, 10:50 PM

Wow, did someone make a mess of that, I would get a piece of a dash from a donor and take it under the rolled protion and all the way to the glove box.

12-20-2010, 08:54 PM	#1
fink64 Registered User Join Date: Oct 2010 Location: new florence, mo Posts: 70	any ideas what i should do with this mess? just wondering if any body had any thoughts about this big @$$ radio hole i ordered a radio delete plate dont think thats going to work thinking about getting a dash repair panel just dont know much about them if any body has any pics of this installed that would be great and was wondering if that had to be welded in or if there are any other options. you cant tell in pic but the smaller hole is also a big dent thanks Attached Images

12-20-2010, 08:59 PM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,031	Re: any ideas what i should do with this mess? Get a patch panel from another dash & weld it in or weld in a flush filler plate over the opening. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

12-20-2010, 09:11 PM	#3
65Gregg Registered User Join Date: Jul 2006 Location: Willis, Texas Posts: 754	Re: any ideas what i should do with this mess? That hurts my eyes, good luck. __________________ 65Gregg Blue long bed White TBSS 61 Impala “The two most important days in your life are the day you are born and the day you find out why.” Mark Twain

12-20-2010, 09:14 PM	#4
DRUMWAGON Registered User Join Date: Dec 2010 Location: Chesapeake, Va Posts: 25	Re: any ideas what i should do with this mess? I would install a plate and some gages to cover the hole. Rather listen to my engine run!

12-20-2010, 09:26 PM	#5
k1rodeoboater Registered User Join Date: Nov 2010 Location: Fayetteville NC Posts: 752	Re: any ideas what i should do with this mess? Patch panel as others have said...or if you are completely opposed to welding I'd do the guages idea.

12-20-2010, 09:36 PM	#6
fink64 Registered User Join Date: Oct 2010 Location: new florence, mo Posts: 70	Re: any ideas what i should do with this mess? there use to be gauges there but bought a gauge cluster to but them back where they belong. would cutting up a dash and welding that piece in be beter than buying a dash repair kit

12-20-2010, 09:40 PM	#7
k1rodeoboater Registered User Join Date: Nov 2010 Location: Fayetteville NC Posts: 752	Re: any ideas what i should do with this mess? 6 in one hand...half dozen in the other. Just my opinion but if you have a dash availible to cut, and it's in good shape...why not just put that dash in instead and save yourself the trouble of having to weld on a very visible surface....then agian I suck at welding....sooooo....yeah

12-21-2010, 12:11 AM	#8
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: any ideas what i should do with this mess? I would repair that with one of the patch panels that are available, unless you have access to a good factory dash. Typically they are welded in, but you could flange the edges and use the 3M panel adhesive. However the dispensing gun for the panel adhesive is spendy. If you know someone in the auto body business, you may be able to borrow one. Keep in mind that you don't have to use the whole patch panel. You can cut them down and use only what you need. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

12-21-2010, 09:13 PM	#9
fink64 Registered User Join Date: Oct 2010 Location: new florence, mo Posts: 70	Re: any ideas what i should do with this mess? well thanks for the ideas it looks like i have a decision to make and soon its getting painted in jan if any one else wants to chime in please do Last edited by fink64; 12-21-2010 at 09:15 PM.

12-21-2010, 09:18 PM	#10
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: any ideas what i should do with this mess? Install a flat screen? __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

12-21-2010, 09:30 PM	#12
fink64 Registered User Join Date: Oct 2010 Location: new florence, mo Posts: 70	Re: any ideas what i should do with this mess? i just bought a new 32 ill give it a try may have to trim it out to cover the hole lol

12-21-2010, 10:50 PM	#13
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: any ideas what i should do with this mess? Wow, did someone make a mess of that, I would get a piece of a dash from a donor and take it under the rolled protion and all the way to the glove box.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.