79 C10 seat ideas - The 1947 - Present Chevrolet & GMC Truck Message Board Network

J/D/S · 12-23-2010, 09:56 AM

I need some ideas on a seat for my build.
Here is the requirements it has to beable to seat three so a bench or a set of buckets with the fold down third seat, also has to go with the Rods Doors door panels. Thanks for your guys help also if you have pics post them too.

496 BB · 12-23-2010, 12:47 PM

Do a search on here as there is HUNDREDS of threads about it detailing pics and such. What you are wanting is probably a 60/40 front bench seat out of a late 90's GM truck. Some seats sit up higher than others such as the 99+ NBS trucks.

You can make just about ANY seat work if you want to fab.

*nbpro* · 12-23-2010, 01:37 PM

I've seats out of a 99 Town and Country van in my truck. The possibilities are endless. With a little fab work and time, anything is possible.
Name: HPIM0402.jpg
Views: 7376
Size: 29.2 KB

Name: HPIM0402.jpg
Views: 7376
Size: 29.2 KB

lilpoindexter · 12-23-2010, 11:52 PM

I have a bench from a '94 silverado in my '78...i used the OG slider by cutting it down, and drilling a few holes in the '94 seat.

J/D/S · 12-24-2010, 03:01 AM

Yep been using the search button like crazy,

J/D/S · 12-24-2010, 03:53 AM

I like this one.
Can anyone tell me what truck this seat came out of?

J/D/S · 12-24-2010, 04:00 AM

also this one.
Can anyone tell me what truck this seat came out of?

J/D/S · 12-24-2010, 04:18 AM

This one would look good covered with custom stitching

brad2 · 12-24-2010, 12:47 PM

Quote:

Originally Posted by J/D/S

I like this one.
Can anyone tell me what truck this seat came out of?

That looks like an S10 so it would be to narrow.

J/D/S · 12-25-2010, 11:31 AM

heres some more

randyre · 08-08-2017, 08:32 PM

Quote:

Originally Posted by J/D/S

Yep been using the search button like crazy,

I know this is an old post, but was hoping someone knew what seat this is from? Is that a stock seat?

**TKCR** · 08-08-2017, 09:12 PM

Quote:

Originally Posted by randyre

I know this is an old post, but was hoping someone knew what seat this is from? Is that a stock seat?

Those are not stock seats for the C10's. Maybe Blazer Buckets with custom reupholstery. They are sweet lookin'!!

randyre · 08-09-2017, 02:02 AM

Quote:

Originally Posted by TKCR

Those are not stock seats for the C10's. Maybe Blazer Buckets with custom reupholstery. They are sweet lookin'!!

Well after looking through LMC and Brothers sites I could not find any trucks or blazers that had a seat like that. I really want that seat. Darn...

OK, I'm finding a few pics like these on early C10's in the 63-68 range. Seems they're called, buddy buckets...

On to do more research.

draggin86 · 12-24-2010, 04:28 AM

Where is stitch at when you need him!?!?! lol!

J/D/S · 12-24-2010, 05:56 AM

I just PM stitch hopefully he can help.

tswore · 12-24-2010, 09:36 AM

the one in the blue truck looks like early 80s ford.

flamingbig10 · 12-25-2010, 08:54 PM

mine are aftermarket that got at a swap meet for less than $300 I have no Idea who makes them and they bolt right on to the factory seat tracks and had them covered in vinyl and they sit good, but that fabric that was on the seats faded from medium blue to light blue in a year

*78 Chevyrado* · 12-25-2010, 11:06 PM

A lot of those seats in the pics aren't in 73-87's They don't have the gas tank humps in the floor and would sit too high your '79.

I'm interested in this too, I think I'm going to buy one of those aftermarket setups. Probably a 40/20/40 seat, a different style, but like this
Leather 40-20-40 Seat Install

BigRed76 · 12-26-2010, 12:59 AM

I really like the early 90's Ford truck bench seats cuz they have foldable armrests in them, big and small. But I haven't seen or heard of anybody fitting one into a squarebody...

J/D/S · 12-26-2010, 11:25 AM

How wide is the factory seat in a 79

J/D/S · 12-26-2010, 11:40 AM

Will this fit in my truck or is it to long/short to work?

J/D/S · 12-27-2010, 02:51 AM

Maybe Stitch could tell me if this will fit?

rayfinseats · 12-27-2010, 04:11 AM

I would go with blazer buckets and just build a seat for the middle and get it upholstered. I have an 83 bench seat at the shop if youd like me to measure it. These are my 1990 60/40 bench seats with 12" removed from the right seat to make buckets. (Cost $0)

*Stitch* · 12-27-2010, 04:14 PM

Sorry about that. I could had swore I replied to that. I thought you were saying I did t reply to another pm. Let me get home and measure and I'll let you know on the size. Also, let's figure out which seat you're gonna go with first and then I can give you a good price. The style of seat is gonna matter when it comes to pricing. And I'm in South Carolina.
Posted via Mobile Device

BigRed76 · 12-27-2010, 11:59 PM

That actually doesnt look as complicated as it may sound, as long as you know someone with a cutting torch and welder

But it looks nice, and gives me some good ideas for the future.

Oh and by the way...do you remember if those seats had the seat belt buckled built into them?

12-23-2010, 09:56 AM	#1
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	79 C10 seat ideas I need some ideas on a seat for my build. Here is the requirements it has to beable to seat three so a bench or a set of buckets with the fold down third seat, also has to go with the Rods Doors door panels. Thanks for your guys help also if you have pics post them too. __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."

12-23-2010, 12:47 PM	#2
496 BB Registered User Join Date: Oct 2010 Location: Ohio Posts: 136	Re: 79 C10 seat ideas Do a search on here as there is HUNDREDS of threads about it detailing pics and such. What you are wanting is probably a 60/40 front bench seat out of a late 90's GM truck. Some seats sit up higher than others such as the 99+ NBS trucks. You can make just about ANY seat work if you want to fab. __________________ 1985 Chevy K-20 350ci (8.1L in the works!) NP203/TH400 (Soon to be 205/400) Dana 44 and 14 bolt FF 7.6' Western Plow 2001 Silverado LT HD 4x4 496ci (8.1L) Allison EFI Live And more.....

12-23-2010, 01:37 PM	#3
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: 79 C10 seat ideas I've seats out of a 99 Town and Country van in my truck. The possibilities are endless. With a little fab work and time, anything is possible.

12-23-2010, 11:52 PM	#4
lilpoindexter Registered User Join Date: Sep 2010 Location: los angeles Posts: 1,134	Re: 79 C10 seat ideas I have a bench from a '94 silverado in my '78...i used the OG slider by cutting it down, and drilling a few holes in the '94 seat.

12-24-2010, 03:01 AM	#5
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	Re: 79 C10 seat ideas Yep been using the search button like crazy, Attached Images __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."

12-24-2010, 03:53 AM	#6
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	Re: 79 C10 seat ideas I like this one. Can anyone tell me what truck this seat came out of? Attached Images __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them." Last edited by J/D/S; 12-24-2010 at 04:16 AM.

12-24-2010, 04:00 AM	#7
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	Re: 79 C10 seat ideas also this one. Can anyone tell me what truck this seat came out of? Attached Images __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them." Last edited by J/D/S; 12-24-2010 at 04:16 AM.

12-24-2010, 04:18 AM	#8
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	Re: 79 C10 seat ideas This one would look good covered with custom stitching Attached Images __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."

12-25-2010, 11:31 AM	#10
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	Re: 79 C10 seat ideas heres some more Attached Images __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."

12-24-2010, 04:28 AM	#14
draggin86 Registered User Join Date: Aug 2004 Location: Folsom, Ca Posts: 573	Re: 79 C10 seat ideas Where is stitch at when you need him!?!?! lol! __________________ My build thread. Boy what did i get myself into!

12-24-2010, 05:56 AM	#15
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	Re: 79 C10 seat ideas I just PM stitch hopefully he can help. __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."

12-24-2010, 09:36 AM	#16
tswore built not bought Join Date: Sep 2003 Location: pocatello, idaho Posts: 160	Re: 79 C10 seat ideas the one in the blue truck looks like early 80s ford. __________________ MY BUILD THREAD "project: what you doin that for?" http://67-72chevytrucks.com/vboard/s...d.php?t=382503

12-25-2010, 08:54 PM	#17
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: 79 C10 seat ideas mine are aftermarket that got at a swap meet for less than $300 I have no Idea who makes them and they bolt right on to the factory seat tracks and had them covered in vinyl and they sit good, but that fabric that was on the seats faded from medium blue to light blue in a year __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 12-26-2010 at 12:07 AM.

12-25-2010, 11:06 PM	#18
78 Chevyrado Account Suspended Join Date: Dec 2007 Location: Unnapreciative, Trollville Posts: 2,079	Re: 79 C10 seat ideas A lot of those seats in the pics aren't in 73-87's They don't have the gas tank humps in the floor and would sit too high your '79. I'm interested in this too, I think I'm going to buy one of those aftermarket setups. Probably a 40/20/40 seat, a different style, but like this Leather 40-20-40 Seat Install

12-26-2010, 12:59 AM	#19
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: 79 C10 seat ideas I really like the early 90's Ford truck bench seats cuz they have foldable armrests in them, big and small. But I haven't seen or heard of anybody fitting one into a squarebody... __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB



Register or Log In To remove these advertisements.

12-26-2010, 11:25 AM	#20
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	Re: 79 C10 seat ideas How wide is the factory seat in a 79 __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."

12-26-2010, 11:40 AM	#21
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	Re: 79 C10 seat ideas Will this fit in my truck or is it to long/short to work? Attached Images __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."

12-27-2010, 02:51 AM	#22
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	Re: 79 C10 seat ideas Maybe Stitch could tell me if this will fit? __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."

12-27-2010, 04:11 AM	#23
rayfinseats Registered User Join Date: Dec 2010 Location: sioux city, iowa Posts: 619	Re: 79 C10 seat ideas I would go with blazer buckets and just build a seat for the middle and get it upholstered. I have an 83 bench seat at the shop if youd like me to measure it. These are my 1990 60/40 bench seats with 12" removed from the right seat to make buckets. (Cost $0) Last edited by rayfinseats; 12-27-2010 at 04:20 AM.

12-27-2010, 04:14 PM	#24
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 79 C10 seat ideas Sorry about that. I could had swore I replied to that. I thought you were saying I did t reply to another pm. Let me get home and measure and I'll let you know on the size. Also, let's figure out which seat you're gonna go with first and then I can give you a good price. The style of seat is gonna matter when it comes to pricing. And I'm in South Carolina. Posted via Mobile Device

12-27-2010, 11:59 PM	#25
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: 79 C10 seat ideas That actually doesnt look as complicated as it may sound, as long as you know someone with a cutting torch and welder But it looks nice, and gives me some good ideas for the future. Oh and by the way...do you remember if those seats had the seat belt buckled built into them? __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

Register or Log In To remove these advertisements.