Headers and Shift Linkage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muckyp · 12-29-2010, 10:16 PM

I need some help/advice. I installed some Patriot mid length headers on a 454 with a TH400 trans. It appears that the exhaust will now interfer with the shifter linkage. I have done a lot of searching but don't seem to see anything about TH400. The posts I find suggest the Lokar cable shifter or the Lokar rod style linkage. What have you guys that have used the Patriot or similar headers done about the trans linkage?

muckyp · 12-30-2010, 11:15 AM

Anyone?
Posted via Mobile Device

**Palf70Step** · 12-30-2010, 11:53 AM

It is very common for headers to interfer with shift linkages. Especially with a big block. You may be able to change out your factory linage for one from Lokar or another aftermarket brand.

tqlspec · 12-30-2010, 11:55 AM

Lokar cable shifter is what I used. It works great and wasn't terribly difficult to install.

muckyp · 12-30-2010, 02:52 PM

Has anyone used the Lokar rod type trans linkage in a similar setup?

project67-stepside · 12-30-2010, 10:29 PM

i just installed the solid linkage, took about an hour to figure it out but worked great with shorty headers...

muckyp · 12-31-2010, 01:49 AM

Project 67, what engine and tranny are running and do you know what brand of header you have? Any pics would be great. Thanks
Posted via Mobile Device

12-29-2010, 10:16 PM	#1
muckyp Registered User Join Date: Mar 2001 Location: Forney, Texas Posts: 290	Headers and Shift Linkage I need some help/advice. I installed some Patriot mid length headers on a 454 with a TH400 trans. It appears that the exhaust will now interfer with the shifter linkage. I have done a lot of searching but don't seem to see anything about TH400. The posts I find suggest the Lokar cable shifter or the Lokar rod style linkage. What have you guys that have used the Patriot or similar headers done about the trans linkage?

12-30-2010, 11:15 AM	#2
muckyp Registered User Join Date: Mar 2001 Location: Forney, Texas Posts: 290	Re: Headers and Shift Linkage Anyone? Posted via Mobile Device

12-30-2010, 11:53 AM	#3
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: Headers and Shift Linkage It is very common for headers to interfer with shift linkages. Especially with a big block. You may be able to change out your factory linage for one from Lokar or another aftermarket brand. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-30-2010, 11:55 AM	#4
tqlspec Registered User Join Date: Feb 2008 Location: Jackson, TN Posts: 99	Re: Headers and Shift Linkage Lokar cable shifter is what I used. It works great and wasn't terribly difficult to install. __________________ Retired Navy 1972 C10 Cheyenne fleetside 350 sbc, 700r4, 3.42 rear

12-30-2010, 02:52 PM	#5
muckyp Registered User Join Date: Mar 2001 Location: Forney, Texas Posts: 290	Re: Headers and Shift Linkage Has anyone used the Lokar rod type trans linkage in a similar setup? __________________ 70 SWB 454/TH400

12-30-2010, 10:29 PM	#6
project67-stepside Registered User Join Date: Dec 2009 Location: mesa,az Posts: 94	Re: Headers and Shift Linkage i just installed the solid linkage, took about an hour to figure it out but worked great with shorty headers... __________________ it usual better and faster if u figure it out yourself!!!!

12-31-2010, 01:49 AM	#7
muckyp Registered User Join Date: Mar 2001 Location: Forney, Texas Posts: 290	Re: Headers and Shift Linkage Project 67, what engine and tranny are running and do you know what brand of header you have? Any pics would be great. Thanks Posted via Mobile Device __________________ 70 SWB 454/TH400



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.