WTB Turbo 400-NP205 Input shaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CORSAIR · 01-06-2011, 05:08 PM

I am looking for a NP-205 32 spline input shaft? I have a 76 NP-205 but its set up for a SM465 and I need to swap out the shaft so I can use a turbo 400

Thanks,
CORSAIR

CORSAIR · 01-06-2011, 11:27 PM

Anybody????????????????????

**Dieselwrencher** · 01-07-2011, 12:37 AM

Post this in the parts section and you might have better luck.

CG · 01-07-2011, 02:06 AM

Quote:

Originally Posted by Dieselwrencher

Post this in the parts section and you might have better luck.

Non subscribing members cant post want to buy threads but they can sure check out the parts section. Maybe a search will turn up what he's looking for. Kind of a hard part to find. Seems like they get snatched up fairly quickly.

CORSAIR · 01-07-2011, 11:33 AM

CG,
I will be a subscribing member this weekend. thanks for the heads up

CG · 01-07-2011, 10:10 PM

Quote:

Originally Posted by CORSAIR

CG,
I will be a subscribing member this weekend. thanks for the heads up

Hey thats very cool of you. Thanks!

**Dieselwrencher** · 01-08-2011, 12:15 AM

Quote:

Originally Posted by CG

Non subscribing members cant post want to buy threads but they can sure check out the parts section. Maybe a search will turn up what he's looking for. Kind of a hard part to find. Seems like they get snatched up fairly quickly.

Whoops, my bad.

royo · 01-08-2011, 12:25 AM

Quote:

Originally Posted by CORSAIR

I am looking for a NP-205 32 spline input shaft? I have a 76 NP-205 but its set up for a SM465 and I need to swap out the shaft so I can use a turbo 400

Thanks,
CORSAIR

ORD has them about 190$ if ya cant find one

CORSAIR · 01-08-2011, 02:21 PM

ORD,
thanks, for the info. I have found new ones but I like oldschool parts and scrounging for them. Nothing better than finding a $200 part for $20 that whats keeps use glue to these computers and hitting bone yards????

CORSAIR

**kwmech** · 01-11-2011, 01:04 PM

You know there is machining required to the case?

CORSAIR · 01-11-2011, 02:08 PM

Thanks for the heads up I may hold tight on it and see if I can off this one and buy a 205 for the t-400 already done?

01-06-2011, 05:08 PM	#1
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	WTB Turbo 400-NP205 Input shaft I am looking for a NP-205 32 spline input shaft? I have a 76 NP-205 but its set up for a SM465 and I need to swap out the shaft so I can use a turbo 400 Thanks, CORSAIR __________________ "The Can't Family Lives Across The Street"

01-06-2011, 11:27 PM	#2
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: WTB Turbo 400-NP205 Input shaft Anybody???????????????????? __________________ "The Can't Family Lives Across The Street"

01-07-2011, 12:37 AM	#3
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,143	Re: WTB Turbo 400-NP205 Input shaft Post this in the parts section and you might have better luck. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-07-2011, 11:33 AM	#5
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: WTB Turbo 400-NP205 Input shaft CG, I will be a subscribing member this weekend. thanks for the heads up __________________ "The Can't Family Lives Across The Street"

01-08-2011, 02:21 PM	#9
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: WTB Turbo 400-NP205 Input shaft ORD, thanks, for the info. I have found new ones but I like oldschool parts and scrounging for them. Nothing better than finding a $200 part for $20 that whats keeps use glue to these computers and hitting bone yards???? CORSAIR __________________ "The Can't Family Lives Across The Street"

01-11-2011, 01:04 PM	#10
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,713	Re: WTB Turbo 400-NP205 Input shaft You know there is machining required to the case?

01-11-2011, 02:08 PM	#11
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: WTB Turbo 400-NP205 Input shaft Thanks for the heads up I may hold tight on it and see if I can off this one and buy a 205 for the t-400 already done? __________________ "The Can't Family Lives Across The Street"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.