harness question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1tonchevy · 01-07-2011, 10:49 AM

Will a 305 motor harness work on a 350?

Jonboy · 01-07-2011, 10:56 AM

It should.

1tonchevy · 01-07-2011, 10:58 AM

Quote:

Originally Posted by Jonboy

It should.

ok thanks. I really need a harness for y truck and a guy has a 305 harness.

James McClure · 01-07-2011, 11:23 AM

1 ton. It should as long as both vehicles are carburated or fuel injected and what level of emmission controls each has. One won't fit the other. Also if one has idiot lights and the other has guages you may have to do some repining or rewireing to get it to work right. Another thing to think about is what kind of accessories each vehicle is equiped with. jim

1tonchevy · 01-07-2011, 11:24 AM

Quote:

Originally Posted by James McClure

1 ton. It should as long as both vehicles are carburated or fuel injected and what level of emmission controls each has. One won't fit the other. Also if one has idiot lights and the other has guages you may have to do some repining or rewireing to get it to work right. Another thing to think about is what kind of accessories each vehicle is equiped with. jim

oh ok... mines just a bare bones 1 ton dually. not sure what the other is.

01-07-2011, 10:49 AM	#1
1tonchevy C35 Crew Dually Join Date: Nov 2008 Location: Belleville Ontario Posts: 1,116	harness question Will a 305 motor harness work on a 350? __________________ If it aint square, I don't care. 84 C35 CC Dually Project log... http://67-72chevytrucks.com/vboard/s...d.php?t=414892 Last edited by 1tonchevy; 01-07-2011 at 10:50 AM.

01-07-2011, 10:56 AM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: harness question It should. __________________ 1974 Jimmy- 5.3/4L80e/NP241

01-07-2011, 11:23 AM	#4
James McClure One shot, one kill. Join Date: Dec 2007 Location: Saratoga Springs NY Posts: 859	Re: harness question 1 ton. It should as long as both vehicles are carburated or fuel injected and what level of emmission controls each has. One won't fit the other. Also if one has idiot lights and the other has guages you may have to do some repining or rewireing to get it to work right. Another thing to think about is what kind of accessories each vehicle is equiped with. jim __________________ 1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shotJim or Paladin whichever you choose.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.