Rear axel Perches - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1tonchevy · 01-08-2011, 09:59 PM

Can you buy new ones so you don't have to cut your off to do a "flip" i got new u bolts an such just need the perches... and dont want to buy a "flip kit"

Tx Firefighter · 01-08-2011, 10:08 PM

I buy them at a trailer parts place. Measure your axle tube and they can sell you a pair cheap. Figure under 20 for the pair at the most.
Posted via Mobile Device

1tonchevy · 01-08-2011, 10:09 PM

Quote:

Originally Posted by Tx Firefighter

I buy them at a trailer parts place. Measure your axle tube and they can sell you a pair cheap. Figure under 20 for the pair at the most.
Posted via Mobile Device

LOL you wouldn't happen to know the diameter of Dana 70 with spicers would you?

Mattman2010 · 01-08-2011, 11:22 PM

I have a dana 70 HD which has 4 inch tubes. I think the Dana 70 uses different ones than a dana 70 hd. It shouldnt be hard to measure yours and see what they are.

1tonchevy · 01-08-2011, 11:52 PM

Quote:

Originally Posted by Mattman2010

I have a dana 70 HD which has 4 inch tubes. I think the Dana 70 uses different ones than a dana 70 hd. It shouldnt be hard to measure yours and see what they are.

lol i just didn't want to roll around in the snow :P hahaha but sigh i guess i'll have too. lol

Mattman2010 · 01-08-2011, 11:59 PM

I think I have read that it is 3.5", but im not sure if that is right or not. I know the Corp 14 bolts are 3 inch, and the dana 70hd is 4.

1tonchevy · 01-09-2011, 12:04 AM

Quote:

Originally Posted by Mattman2010

I think I have read that it is 3.5", but im not sure if that is right or not. I know the Corp 14 bolts are 3 inch, and the dana 70hd is 4.

whats the difference between a D70 and D70HD? because mine looks rather large in diameter

Mattman2010 · 01-09-2011, 12:17 AM

Uh, bigger tubes. Thicker tubes as well. I think gross weight for the dana 70 hd was 10,000 lbs.

1tonchevy · 01-09-2011, 12:20 AM

Quote:

Originally Posted by Mattman2010

Uh, bigger tubes. Thicker tubes as well. I think gross weight for the dana 70 hd was 10,000 lbs.

I walked right into that one.....

BIG V · 01-09-2011, 12:24 PM

buy them for 3.5 tubes... If they are not big enough use the victor wrench and open them up a bit. I used pads for 3 inch tubes and opened them up a bit for my dana 70 super duper heavy duty don't really care about weight spec's rear axle.... lmao

1tonchevy · 01-09-2011, 12:37 PM

Quote:

Originally Posted by BIG V

buy them for 3.5 tubes... If they are not big enough use the victor wrench and open them up a bit. I used pads for 3 inch tubes and opened them up a bit for my dana 70 super duper heavy duty don't really care about weight spec's rear axle.... lmao

Do you have any pics of your install?

BIG V · 01-09-2011, 12:59 PM

here's one

01-08-2011, 09:59 PM	#1
1tonchevy C35 Crew Dually Join Date: Nov 2008 Location: Belleville Ontario Posts: 1,116	Rear axel Perches Can you buy new ones so you don't have to cut your off to do a "flip" i got new u bolts an such just need the perches... and dont want to buy a "flip kit" __________________ If it aint square, I don't care. 84 C35 CC Dually Project log... http://67-72chevytrucks.com/vboard/s...d.php?t=414892

01-08-2011, 10:08 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Rear axel Perches I buy them at a trailer parts place. Measure your axle tube and they can sell you a pair cheap. Figure under 20 for the pair at the most. Posted via Mobile Device __________________ I'm on the Instagram- @Gearhead_Kevin

01-08-2011, 11:22 PM	#4
Mattman2010 Registered User Join Date: Jun 2010 Location: Pittsburg, KS Posts: 953	Re: Rear axel Perches I have a dana 70 HD which has 4 inch tubes. I think the Dana 70 uses different ones than a dana 70 hd. It shouldnt be hard to measure yours and see what they are. __________________ 1980 K10 - 6.2L Diesel/SM465/NP205 Build Thread 1984 K30 CC Dually - "The Tank" 12V Cummins/Nv4500/Np205/D60/D70HD 4" lift & 37's Build Thread 1960 C-60 Dump Truck Make it road worthy! Thread

01-08-2011, 11:59 PM	#6
Mattman2010 Registered User Join Date: Jun 2010 Location: Pittsburg, KS Posts: 953	Re: Rear axel Perches I think I have read that it is 3.5", but im not sure if that is right or not. I know the Corp 14 bolts are 3 inch, and the dana 70hd is 4. __________________ 1980 K10 - 6.2L Diesel/SM465/NP205 Build Thread 1984 K30 CC Dually - "The Tank" 12V Cummins/Nv4500/Np205/D60/D70HD 4" lift & 37's Build Thread 1960 C-60 Dump Truck Make it road worthy! Thread

01-09-2011, 12:17 AM	#8
Mattman2010 Registered User Join Date: Jun 2010 Location: Pittsburg, KS Posts: 953	Re: Rear axel Perches Uh, bigger tubes. Thicker tubes as well. I think gross weight for the dana 70 hd was 10,000 lbs. __________________ 1980 K10 - 6.2L Diesel/SM465/NP205 Build Thread 1984 K30 CC Dually - "The Tank" 12V Cummins/Nv4500/Np205/D60/D70HD 4" lift & 37's Build Thread 1960 C-60 Dump Truck Make it road worthy! Thread

01-09-2011, 12:24 PM	#10
BIG V Registered User Join Date: Jul 2009 Location: Northern California Posts: 411	Re: Rear axel Perches buy them for 3.5 tubes... If they are not big enough use the victor wrench and open them up a bit. I used pads for 3 inch tubes and opened them up a bit for my dana 70 super duper heavy duty don't really care about weight spec's rear axle.... lmao __________________ 1991 Chevy suburban 3/4 ton 4x 4:56 and pulls great 1979 Chevy 1/2 ton long bed diesel 1974 Chevy crew cab short bed 3/4 ton 4x4 project 1991 Chevy suburban 2wd 1984 Chevy suburban 3/4 ton 4x 6.5 detroit with turbo 1961 Chevy pickup 1/2 ton 2wd 1975 gmc crew cab short bed 2wd

01-09-2011, 12:59 PM	#12
BIG V Registered User Join Date: Jul 2009 Location: Northern California Posts: 411	Re: Rear axel Perches here's one Attached Images __________________ 1991 Chevy suburban 3/4 ton 4x 4:56 and pulls great 1979 Chevy 1/2 ton long bed diesel 1974 Chevy crew cab short bed 3/4 ton 4x4 project 1991 Chevy suburban 2wd 1984 Chevy suburban 3/4 ton 4x 6.5 detroit with turbo 1961 Chevy pickup 1/2 ton 2wd 1975 gmc crew cab short bed 2wd



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.