SC left over 72 trim parts for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

roughedup72 · 01-15-2011, 11:55 AM

I have a couple of pieces that came off my truck that is in decent shape. Some good driver pieces and I have the paint devider thats in really good shape with one or two very small dings in it. I will have to post a pic of it and I will do it today.

First Pic Sold
second pic 5.00 + shipping
third pic 10.00 for the set + shipping
fourth pic SOLD
fith pic 5.00 + shipping .a little bent on the left side.

roughedup72 · 01-15-2011, 12:03 PM

heres some more.

first pic from top to bottom
10.00
5.00
10.00
5.00

Fourth pic Sold

1971 K10 shortbox · 01-15-2011, 02:02 PM

Is the tailgate band straight? Does it have any dings?

roughedup72 · 01-15-2011, 02:14 PM

71 k10. It is straight but does have a couple of dings in it. I just went to try and find the v and r letters that are missing and could only come up with the v. I know I used to have both of them but must have misplaced the r. here is a close up of the dings.

roughedup72 · 01-15-2011, 02:16 PM

here's two more. You can see it under the V.

roughedup72 · 01-15-2011, 02:23 PM

here is a couple more pics including the paint devider and an alluminum radiator.
The devider is in really nice shape 15.00 + shipping
Radiator, Sold

gringoloco · 01-16-2011, 02:03 AM

I'll take the band and divider pending shipping quote to 71105. Any SWB trim?

Thanks -Chris

**Dieselwrencher** · 01-16-2011, 03:50 AM

I'd like to get in line for the radiator. Could you get me a shipping quote to 50169 please? Thanks Ryan.

roughedup72 · 01-17-2011, 01:04 PM

Quote:

Originally Posted by Dieselwrencher

I'd like to get in line for the radiator. Could you get me a shipping quote to 50169 please? Thanks Ryan.

The shipping on the radiator is 79.09 from ups. this was weighed and measured by ups so I know that woould be the final shipping cost. Let me know if your'e still in. Its boxed and ready to go. Thanks, Troy

gringoloco · 01-16-2011, 06:59 PM

I'll take the lonely cab corner piece as well...

roughedup72 · 01-16-2011, 07:54 PM

Quote:

Originally Posted by gringoloco

I'll take the lonely cab corner piece as well...

Hey gringoloco, Can you tell me which cab corner you want . the upper or lower with wood grain? Thanks

roughedup72 · 01-16-2011, 07:31 PM

Gringoloco and dieselwrencher I will get you shipping quotes and be back with you in a minute. I just checked the forum and noticed you guys have asked for quotes. Thanks

roughedup72 · 01-16-2011, 07:48 PM

Hey guys if the shipping cal.is right and I entered it in correctly it looks like it would be 13.93 for shipping to 71105 and 43.95 to 50169. If you would like I can get a better idea tommorow and pm you and let you know for sure. I would hate to overcharge for shipping on any of those items. Thanks, Troy

gringoloco · 01-16-2011, 08:34 PM

Lower w/ woodgrain. Do you have the other side? I will pass on the divider.

Band and corner- $35 shipped?

roughedup72 · 01-16-2011, 09:15 PM

I may have the other side. I think I took it off the truck its just a matter of finding it. If so I will do 35.00 shipped as long as shipping doesnt cost more than what I'm letting it go for. I will throw in the other corner if I can find it.

gringoloco · 01-16-2011, 09:43 PM

Quote:

Originally Posted by roughedup72

I may have the other side. I think I took it off the truck its just a matter of finding it. If so I will do 35.00 shipped as long as shipping doesnt cost more than what I'm letting it go for. I will throw in the other corner if I can find it.

Awesome! Just let me know how to pay you.

Thanks -Chris

**Dieselwrencher** · 01-17-2011, 06:28 PM

Is it a 2 or 3 core? Thanks for getting those quotes.

roughedup72 · 01-17-2011, 07:09 PM

You Would ask After its all boxed up,Lol
I will look and see. It may be one large flume type or a two flume. I will check it out and let you know.

Quote:

Originally Posted by Dieselwrencher

Is it a 2 or 3 core? Thanks for getting those quotes.

roughedup72 · 01-17-2011, 07:32 PM

Dieselwrencher, Its one large flume that is about 1" wide. I was using it in the summer time here in south carolina and I didn't have a prblem with it cooling my truck. I only removed it because I didn't like the way I had it mounted. If I would of had the tools to make a special mounting bracket I would keep it. For 175 shipped its a pretty good radiator. I think I paid more than I said I had. I looked one up like it last night and it was over 250. Its not the top of the line but it works.

**Dieselwrencher** · 01-17-2011, 10:50 PM

I will do some research and see if it will work for me. I won't be using a gas engine and need the capacity. Thanks for checking, I'll let you know when I find out. Ryan.

ls1nova71 · 01-17-2011, 11:26 PM

I'll get in line for the radiator if Dieselwrencher passes.

roughedup72 · 01-18-2011, 01:14 AM

Ok, Ryan let me know what you want to do when you find out. Ls1 you're next in line, I will be out of town the rest of the week but will checking in. If one of you decide just pm me please. Also shipping to ryans house is probably 5 dollars higher than the quote they gave me at the ups hub. It goes up when you add the full address for some reason. Ryan you're still looking at what I quoted you. Thanks
Posted via Mobile Device

**Dieselwrencher** · 01-18-2011, 05:10 AM

Roughedup72, I'm going to pass and let ls1nova71 go for it. I don't want to hold up a sale for you. Thanks for the leg work. I appreciate it. Ryan.

roughedup72 · 01-18-2011, 09:43 AM

Ls1nova71, you're up for the radiator, if you will pm me your address I will see what shipping will be for you. I need the full address so I can get a accurate quote. Thanks, Troy
Posted via Mobile Device

ls1nova71 · 01-18-2011, 10:26 AM

Pm sent
Posted via Mobile Device

01-15-2011, 11:55 AM	#1
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	left over 72 trim parts for sale I have a couple of pieces that came off my truck that is in decent shape. Some good driver pieces and I have the paint devider thats in really good shape with one or two very small dings in it. I will have to post a pic of it and I will do it today. First Pic Sold second pic 5.00 + shipping third pic 10.00 for the set + shipping fourth pic SOLD fith pic 5.00 + shipping .a little bent on the left side. Attached Images __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod. Last edited by roughedup72; 01-27-2011 at 10:16 PM.

01-15-2011, 12:03 PM	#2
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: left over 72 trim parts for sale heres some more. first pic from top to bottom 10.00 5.00 10.00 5.00 Fourth pic Sold Attached Images __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod. Last edited by roughedup72; 01-27-2011 at 10:15 PM.

01-15-2011, 02:02 PM	#3
1971 K10 shortbox Registered User Join Date: Jan 2008 Location: Lake Orion MI Posts: 111	Re: left over 72 trim parts for sale Is the tailgate band straight? Does it have any dings? __________________ 1971 Chevy SWB 4x4 1971 Chevy LWB 2003 Duramax

01-15-2011, 02:14 PM	#4
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: left over 72 trim parts for sale 71 k10. It is straight but does have a couple of dings in it. I just went to try and find the v and r letters that are missing and could only come up with the v. I know I used to have both of them but must have misplaced the r. here is a close up of the dings. Attached Images __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

01-15-2011, 02:16 PM	#5
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: left over 72 trim parts for sale here's two more. You can see it under the V. Attached Images __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod. Last edited by roughedup72; 01-15-2011 at 02:16 PM.

01-15-2011, 02:23 PM	#6
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: left over 72 trim parts for sale here is a couple more pics including the paint devider and an alluminum radiator. The devider is in really nice shape 15.00 + shipping Radiator, Sold Attached Images __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod. Last edited by roughedup72; 01-27-2011 at 10:18 PM.

01-16-2011, 02:03 AM	#7
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: left over 72 trim parts for sale I'll take the band and divider pending shipping quote to 71105. Any SWB trim? Thanks -Chris __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-16-2011 at 02:10 AM.

01-16-2011, 03:50 AM	#8
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: left over 72 trim parts for sale I'd like to get in line for the radiator. Could you get me a shipping quote to 50169 please? Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-16-2011, 06:59 PM	#10
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: left over 72 trim parts for sale I'll take the lonely cab corner piece as well... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-16-2011, 07:31 PM	#12
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: left over 72 trim parts for sale Gringoloco and dieselwrencher I will get you shipping quotes and be back with you in a minute. I just checked the forum and noticed you guys have asked for quotes. Thanks __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod. Last edited by roughedup72; 01-16-2011 at 07:49 PM.

01-16-2011, 07:48 PM	#13
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: left over 72 trim parts for sale Hey guys if the shipping cal.is right and I entered it in correctly it looks like it would be 13.93 for shipping to 71105 and 43.95 to 50169. If you would like I can get a better idea tommorow and pm you and let you know for sure. I would hate to overcharge for shipping on any of those items. Thanks, Troy __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

01-16-2011, 08:34 PM	#14
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: left over 72 trim parts for sale Lower w/ woodgrain. Do you have the other side? I will pass on the divider. Band and corner- $35 shipped? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-16-2011 at 08:35 PM.

01-16-2011, 09:15 PM	#15
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: left over 72 trim parts for sale I may have the other side. I think I took it off the truck its just a matter of finding it. If so I will do 35.00 shipped as long as shipping doesnt cost more than what I'm letting it go for. I will throw in the other corner if I can find it. __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

01-17-2011, 06:28 PM	#17
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: left over 72 trim parts for sale Is it a 2 or 3 core? Thanks for getting those quotes. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-17-2011, 07:32 PM	#19
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: left over 72 trim parts for sale Dieselwrencher, Its one large flume that is about 1" wide. I was using it in the summer time here in south carolina and I didn't have a prblem with it cooling my truck. I only removed it because I didn't like the way I had it mounted. If I would of had the tools to make a special mounting bracket I would keep it. For 175 shipped its a pretty good radiator. I think I paid more than I said I had. I looked one up like it last night and it was over 250. Its not the top of the line but it works. __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.



Register or Log In To remove these advertisements.

01-17-2011, 10:50 PM	#20
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: left over 72 trim parts for sale I will do some research and see if it will work for me. I won't be using a gas engine and need the capacity. Thanks for checking, I'll let you know when I find out. Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-17-2011, 11:26 PM	#21
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: left over 72 trim parts for sale I'll get in line for the radiator if Dieselwrencher passes.

01-18-2011, 01:14 AM	#22
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: left over 72 trim parts for sale Ok, Ryan let me know what you want to do when you find out. Ls1 you're next in line, I will be out of town the rest of the week but will checking in. If one of you decide just pm me please. Also shipping to ryans house is probably 5 dollars higher than the quote they gave me at the ups hub. It goes up when you add the full address for some reason. Ryan you're still looking at what I quoted you. Thanks Posted via Mobile Device __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

01-18-2011, 05:10 AM	#23
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: left over 72 trim parts for sale Roughedup72, I'm going to pass and let ls1nova71 go for it. I don't want to hold up a sale for you. Thanks for the leg work. I appreciate it. Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-18-2011, 09:43 AM	#24
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: left over 72 trim parts for sale Ls1nova71, you're up for the radiator, if you will pm me your address I will see what shipping will be for you. I need the full address so I can get a accurate quote. Thanks, Troy Posted via Mobile Device __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

01-18-2011, 10:26 AM	#25
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: left over 72 trim parts for sale Pm sent Posted via Mobile Device

Register or Log In To remove these advertisements.