tire size for stock wheels? 68 C-10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

burkeens · 01-16-2011, 11:59 AM

Any suggestions on what tire sizes will work on the original steel wheels? 215/70 R15 on them now. They look a little small, but I guess that's because they are 15s. Original spare is still underneath and looks even thinner.

Also, if I go with that same size, Bridgestone makes a tire, Turanza EL400, in that size with a whitewall. Load rating is 97T. Any thoughts on if that's robust enough? I'll carry a scoop of mulch or soil in it occasionally, but it won't be used "as a truck" all that often. If not that tire, any other suggestions for a whitewall that will work on the steelies?

Thanks!

**special-K** · 01-16-2011, 12:06 PM

The closest contemporary tire size would be a 235/75-15. 75 series tires are the profile the old normal 78 series tires were.

**Boog** · 01-16-2011, 12:08 PM

The size used often on the 67-72s back then was a G78/15. It is about the size equivalent of today's 215 or 225/75/15. 235/75/15 is just a bit bigger and fills the wheel opening better without going real wide.

burkeens · 01-16-2011, 02:11 PM

Thank you!

burkeens · 01-16-2011, 02:23 PM

P.S. Should I be worried about any problems if going to a larger tire size? I'm thinking about braking issues with the 4-wheel manual drums.

**Boog** · 01-16-2011, 05:26 PM

I wouldn't be concerned as long as your brakes are in good operating order. People have often run much larger tires than these with the same drum brakes and no problems.

factorystock · 01-17-2011, 10:49 PM

A common old school truck tire size was the 7.00-15 like in this period photo of a '68 C 10. This size is still available if special ordered. Yokohama also makes this same size in radial 7.00R-15. These are about 29" tall. Modern car tires just don't have the same tall narrow profile, they are too wide and short, plus don't have the cool "side tread". For some reason they don't make a tall 85 series 15" tire for your rim, the tallest is 75 series. 7O series are way too short.

sameyrasmea72 · 01-17-2011, 11:17 PM

I wanted a stock look, so I went with a 235/75. They are probably a tad bigger than the factory ones but i did not want to pay $$$$$ for the correct ones for a driver.

01-16-2011, 11:59 AM	#1
burkeens Registered User Join Date: Oct 2010 Location: Nashville, TN Posts: 177	tire size for stock wheels? 68 C-10 Any suggestions on what tire sizes will work on the original steel wheels? 215/70 R15 on them now. They look a little small, but I guess that's because they are 15s. Original spare is still underneath and looks even thinner. Also, if I go with that same size, Bridgestone makes a tire, Turanza EL400, in that size with a whitewall. Load rating is 97T. Any thoughts on if that's robust enough? I'll carry a scoop of mulch or soil in it occasionally, but it won't be used "as a truck" all that often. If not that tire, any other suggestions for a whitewall that will work on the steelies? Thanks! Last edited by burkeens; 01-16-2011 at 12:06 PM.

01-16-2011, 12:06 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: tire size for stock wheels? 68 C-10 The closest contemporary tire size would be a 235/75-15. 75 series tires are the profile the old normal 78 series tires were. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-16-2011, 12:08 PM	#3
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,514	Re: tire size for stock wheels? 68 C-10 The size used often on the 67-72s back then was a G78/15. It is about the size equivalent of today's 215 or 225/75/15. 235/75/15 is just a bit bigger and fills the wheel opening better without going real wide. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

01-16-2011, 02:11 PM	#4
burkeens Registered User Join Date: Oct 2010 Location: Nashville, TN Posts: 177	Re: tire size for stock wheels? 68 C-10 Thank you!

01-16-2011, 02:23 PM	#5
burkeens Registered User Join Date: Oct 2010 Location: Nashville, TN Posts: 177	Re: tire size for stock wheels? 68 C-10 P.S. Should I be worried about any problems if going to a larger tire size? I'm thinking about braking issues with the 4-wheel manual drums.

01-16-2011, 05:26 PM	#6
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,514	Re: tire size for stock wheels? 68 C-10 I wouldn't be concerned as long as your brakes are in good operating order. People have often run much larger tires than these with the same drum brakes and no problems. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

01-17-2011, 10:49 PM	#7
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,396	Re: tire size for stock wheels? 68 C-10 A common old school truck tire size was the 7.00-15 like in this period photo of a '68 C 10. This size is still available if special ordered. Yokohama also makes this same size in radial 7.00R-15. These are about 29" tall. Modern car tires just don't have the same tall narrow profile, they are too wide and short, plus don't have the cool "side tread". For some reason they don't make a tall 85 series 15" tire for your rim, the tallest is 75 series. 7O series are way too short. Attached Images

01-17-2011, 11:17 PM	#8
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Re: tire size for stock wheels? 68 C-10 I wanted a stock look, so I went with a 235/75. They are probably a tad bigger than the factory ones but i did not want to pay $$$$$ for the correct ones for a driver. Attached Images __________________ 72 Cheyenne Super 80 Silverado Blazer 2wd



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.