MD 72 Chevy Truck Automatic Tilt Column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cmabolt · 01-27-2011, 05:32 PM

72 chevy truck tilt auto. column in good condition. Purchased from forum member but decided to stay with non tilt column. Wires were cut at some point and put back together. It was painted at some point as well. All the levers look good.
I paid $240.00 shipped so want $240 shipped.

Thanks

**jimer1964** · 01-27-2011, 05:44 PM

hi have a couple dana 60 rears up here in pa.are looking to trade plus some cash for tilt?

cmabolt · 01-28-2011, 10:18 AM

I am specifically looking for a full float dana 60, 8 lug out of a 3/4 or 1 ton
4x4 68-71 gmc/chevy. Something that will need very little modification to bolt in.

If you have this, I could be interested in a trade with cash.

**jimer1964** · 01-28-2011, 11:57 AM

what i have is a 1970 3/4 4x4 dana 60

cmabolt · 01-28-2011, 04:02 PM

Is it out of a chevy/gmc?? What ratio? How much do you want with trade?

peterbuilt · 02-05-2011, 08:20 PM

Interested
- can come by most anytime. Even tomorrow early afternoon if that works.
Let me know.
Thanks

srea76 · 02-05-2011, 08:52 PM

I interested. Is it a van tilt or true truck tilt?

cmabolt · 02-06-2011, 12:23 AM

I believe this is a truck tilt. It was sold as a truck tilt. I will let you know if I don't sell it. I have someone else interested.

cmabolt · 02-13-2011, 03:16 PM

Column still up for grabs. If no takers it will be traded this spring.

srea76 · 02-13-2011, 05:15 PM

I could go 200 shipped, but best I can do at this time.

peterbuilt · 02-13-2011, 06:22 PM

I can come up tomorrow (Monday) anytime. Call me at 202.262.7914
Thanks

**DPowers** · 02-13-2011, 06:33 PM

Can you post a pic of the splined end shaft.

teeitup · 02-13-2011, 08:50 PM

Any slop in shifter pin, and as DPowers asked pic of end would be good. Thanks Randy

cmabolt · 02-15-2011, 09:53 AM

I will post some more pics this weekend.

teeitup · 02-15-2011, 09:58 AM

I'll take it for $200 shipped if it has short shaft at end and no slop in shifter pin area. Not sure where you are at on order of buying. Thanks Randy

dave666693 · 02-15-2011, 10:32 AM

Put me in line please

**DPowers** · 02-15-2011, 08:15 PM

Still have or sold?

cmabolt · 02-16-2011, 10:18 AM

I still have the column. I was going to post some more pics for other members this weekend.

gcburdic · 02-16-2011, 10:26 AM

Hello cmabolt....In an effort to not confuse potential buyers, would you mind clarifing who is up first, second, etc on this column so there is no confusion once you get pictures up??

Thanks in advance...Geoff

cmabolt · 02-16-2011, 11:15 AM

Hi all, as requested here is the order and status based on buyers order.
Jimmer1964 made offer
Peterbuilt - not made an offer
Srea76 - made offer
Dpowers - waiting on pics
teeitup - waiting on condition and pics
dave666693 - not made an offer

To all, I will post more pics and double check the condition as requested by some. I will definitely sell this thing next week. I do want $240 shipped so please keep in mind when making offers.

dave666693 · 02-16-2011, 12:38 PM

Quote:

Originally Posted by cmabolt

Hi all, as requested here is the order and status based on buyers order.
Jimmer1964 made offer
Peterbuilt - not made an offer
Srea76 - made offer
Dpowers - waiting on pics
teeitup - waiting on condition and pics
dave666693 - not made an offer

To all, I will post more pics and double check the condition as requested by some. I will definitely sell this thing next week. I do want $240 shipped so please keep in mind when making offers.

Too confusing for me. Drop me off the list

mcbassin · 02-16-2011, 12:10 PM

I want in line at $200 shipped if it gets to me and I want to see pics of the spline shaft, or confirmation it is a sure enough truck tilt. I don't want to jump in front of anyone.Thanks

VA72C10 · 02-16-2011, 02:01 PM

Just a reminder guys, the person who gets the tilt is first person to say they will take it at the seller's asking price. Or if the seller agrees to a lower offer. Otherwise, it's up to the seller's discretion on who's in line based on their offer and whether it was reasonable or not.

The seller has posted he is wanting 240 shipped. He is going to post the additional requested pictures this weekend. Until someone posts they will take it either before or after the pictures, the item is still available at the seller's discretion...

cmabolt · 02-19-2011, 12:30 PM

Hi gang, here are additional pics as requested. I have looked over the column and varified that all tilt, bearings, mechanisms are working well. There is no slop in the shaft either vertical or horizontal. It feel very tight. The inner tube for shifting moves freely and with ease. The tilt is tight and locks at all the angles available with good spring back.

see pics below

VA72C10 · 02-19-2011, 01:01 PM

I will take it at 220 shipped if the others pass or if 220 shipped gets it.

01-27-2011, 05:32 PM	#1
cmabolt Registered User Join Date: Nov 2007 Location: baltimore, maryland Posts: 617	72 Chevy Truck Automatic Tilt Column 72 chevy truck tilt auto. column in good condition. Purchased from forum member but decided to stay with non tilt column. Wires were cut at some point and put back together. It was painted at some point as well. All the levers look good. I paid $240.00 shipped so want $240 shipped. Thanks Attached Images __________________ Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636 Easier to beg forgiveness than ask permission!

01-27-2011, 05:44 PM	#2
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,683	Re: 72 Chevy Truck Automatic Tilt Column hi have a couple dana 60 rears up here in pa.are looking to trade plus some cash for tilt?

01-28-2011, 10:18 AM	#3
cmabolt Registered User Join Date: Nov 2007 Location: baltimore, maryland Posts: 617	Re: 72 Chevy Truck Automatic Tilt Column I am specifically looking for a full float dana 60, 8 lug out of a 3/4 or 1 ton 4x4 68-71 gmc/chevy. Something that will need very little modification to bolt in. If you have this, I could be interested in a trade with cash. __________________ Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636 Easier to beg forgiveness than ask permission!

01-28-2011, 11:57 AM	#4
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,683	Re: 72 Chevy Truck Automatic Tilt Column what i have is a 1970 3/4 4x4 dana 60

01-28-2011, 04:02 PM	#5
cmabolt Registered User Join Date: Nov 2007 Location: baltimore, maryland Posts: 617	Re: 72 Chevy Truck Automatic Tilt Column Is it out of a chevy/gmc?? What ratio? How much do you want with trade? __________________ Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636 Easier to beg forgiveness than ask permission!

02-05-2011, 08:20 PM	#6
peterbuilt Registered User Join Date: Oct 2010 Location: Washington, DC Posts: 30	Re: 72 Chevy Truck Automatic Tilt Column Interested - can come by most anytime. Even tomorrow early afternoon if that works. Let me know. Thanks

02-05-2011, 08:52 PM	#7
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: 72 Chevy Truck Automatic Tilt Column I interested. Is it a van tilt or true truck tilt? __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project

02-06-2011, 12:23 AM	#8
cmabolt Registered User Join Date: Nov 2007 Location: baltimore, maryland Posts: 617	Re: 72 Chevy Truck Automatic Tilt Column I believe this is a truck tilt. It was sold as a truck tilt. I will let you know if I don't sell it. I have someone else interested. __________________ Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636 Easier to beg forgiveness than ask permission!

02-13-2011, 03:16 PM	#9
cmabolt Registered User Join Date: Nov 2007 Location: baltimore, maryland Posts: 617	Re: 72 Chevy Truck Automatic Tilt Column Column still up for grabs. If no takers it will be traded this spring. __________________ Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636 Easier to beg forgiveness than ask permission!

02-13-2011, 05:15 PM	#10
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: 72 Chevy Truck Automatic Tilt Column I could go 200 shipped, but best I can do at this time. __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project

02-13-2011, 06:22 PM	#11
peterbuilt Registered User Join Date: Oct 2010 Location: Washington, DC Posts: 30	Re: 72 Chevy Truck Automatic Tilt Column I can come up tomorrow (Monday) anytime. Call me at 202.262.7914 Thanks

02-13-2011, 06:33 PM	#12
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 72 Chevy Truck Automatic Tilt Column Can you post a pic of the splined end shaft. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

02-13-2011, 08:50 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 Chevy Truck Automatic Tilt Column Any slop in shifter pin, and as DPowers asked pic of end would be good. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-15-2011, 09:53 AM	#14
cmabolt Registered User Join Date: Nov 2007 Location: baltimore, maryland Posts: 617	Re: 72 Chevy Truck Automatic Tilt Column I will post some more pics this weekend. __________________ Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636 Easier to beg forgiveness than ask permission!

02-15-2011, 09:58 AM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 Chevy Truck Automatic Tilt Column I'll take it for $200 shipped if it has short shaft at end and no slop in shifter pin area. Not sure where you are at on order of buying. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

02-15-2011, 10:32 AM	#16
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 901	Re: 72 Chevy Truck Automatic Tilt Column Put me in line please __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

02-15-2011, 08:15 PM	#17
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 72 Chevy Truck Automatic Tilt Column Still have or sold? __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

02-16-2011, 10:18 AM	#18
cmabolt Registered User Join Date: Nov 2007 Location: baltimore, maryland Posts: 617	Re: 72 Chevy Truck Automatic Tilt Column I still have the column. I was going to post some more pics for other members this weekend. __________________ Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636 Easier to beg forgiveness than ask permission!

02-16-2011, 10:26 AM	#19
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 72 Chevy Truck Automatic Tilt Column Hello cmabolt....In an effort to not confuse potential buyers, would you mind clarifing who is up first, second, etc on this column so there is no confusion once you get pictures up?? Thanks in advance...Geoff __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

02-16-2011, 11:15 AM	#20
cmabolt Registered User Join Date: Nov 2007 Location: baltimore, maryland Posts: 617	Re: 72 Chevy Truck Automatic Tilt Column Hi all, as requested here is the order and status based on buyers order. Jimmer1964 made offer Peterbuilt - not made an offer Srea76 - made offer Dpowers - waiting on pics teeitup - waiting on condition and pics dave666693 - not made an offer To all, I will post more pics and double check the condition as requested by some. I will definitely sell this thing next week. I do want $240 shipped so please keep in mind when making offers. __________________ Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636 Easier to beg forgiveness than ask permission!

02-16-2011, 12:10 PM	#22
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 72 Chevy Truck Automatic Tilt Column I want in line at $200 shipped if it gets to me and I want to see pics of the spline shaft, or confirmation it is a sure enough truck tilt. I don't want to jump in front of anyone.Thanks __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 02-16-2011 at 12:10 PM.

02-16-2011, 02:01 PM	#23
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 72 Chevy Truck Automatic Tilt Column Just a reminder guys, the person who gets the tilt is first person to say they will take it at the seller's asking price. Or if the seller agrees to a lower offer. Otherwise, it's up to the seller's discretion on who's in line based on their offer and whether it was reasonable or not. The seller has posted he is wanting 240 shipped. He is going to post the additional requested pictures this weekend. Until someone posts they will take it either before or after the pictures, the item is still available at the seller's discretion... __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-19-2011, 12:30 PM	#24
cmabolt Registered User Join Date: Nov 2007 Location: baltimore, maryland Posts: 617	Re: 72 Chevy Truck Automatic Tilt Column Hi gang, here are additional pics as requested. I have looked over the column and varified that all tilt, bearings, mechanisms are working well. There is no slop in the shaft either vertical or horizontal. It feel very tight. The inner tube for shifting moves freely and with ease. The tilt is tight and locks at all the angles available with good spring back. see pics below Attached Images __________________ Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636 Easier to beg forgiveness than ask permission!

02-19-2011, 01:01 PM	#25
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 72 Chevy Truck Automatic Tilt Column I will take it at 220 shipped if the others pass or if 220 shipped gets it. __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.