Billet Specialties turn lever and flasher knob ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PHOENIX · 03-13-2003, 03:53 PM

I just ordered the turn signal lever and knob along with the hazard knob and bowtie shifter knob

Anyway I have no problems with the turn knob or the shifter knob, my question is about the hazard knob.
How do you remove and install a new one?
Do you just remove that screw and it comes off?
Some details on removal and installation would be helpful.
Im sure its easy and Ill figure it out, but the boards slow and I figured Id through something out here

Ohh yeah, anyone know where to find the ignition key release lever in aluminum?

Thanks!

Low87 · 03-13-2003, 04:00 PM

Are you just wanting to spend all your free time polishing????

I've never tried to remove the hazard pull, I'll look at it tonight and try to take it off. I'll let you know.

ocbaud · 03-13-2003, 04:12 PM

Quote:

Originally posted by Low87
Are you just wanting to spend all your free time polishing????

whats wrong with that?

i'm used to it with my aluminum wheels and billet interior pieces(same as you just not shiny)

LOHRTBT · 03-13-2003, 04:26 PM

The hazard pull is easy...just get a phillips screwdriver and unscrew it.

PHOENIX · 03-13-2003, 04:34 PM

Thought so, wasnt sure though

I would still like to have a picture of how the grant steering wheel horns should be wired. I look at what I have and just dont get it. Im missing some stuff and dont know what. If someone could post a picture of their grant wheel horn installed and everything I would greatly appreciate it

Im gonna try to dig into the truck this weekend, but I doubt Ill have the turn lever by then, so Ill wait to go into the column for that.

EDIT:
Ill just carry some polish and a rag, so when Im stuck in a line or at a stop light I can get my polish on

For the curious heres a few pictures

Little things make all the difference!

AirMale · 03-13-2003, 04:45 PM

Did you just say you're gonna polish your knob at the stop light? That's just wrong!

Low87 · 03-13-2003, 05:34 PM

Quote:

Originally posted by AirMale
Did you just say you're gonna polish your knob at the stop light? That's just wrong!

DAMMIT MAN! You beat me to it! LMFAO!!!!

Nice looking stuff there! I'm tempted to get my own now! Lil G, nothing wrong with it, just gets to be old!

LOHRTBT · 03-13-2003, 05:48 PM

lmao!!

ocbaud · 03-13-2003, 07:16 PM

Quote:

Originally posted by LOHRTBT
lmao!!

stfu!

ChrisK10 · 03-13-2003, 07:16 PM

ROFL!

-Chris

LOHRTBT · 03-13-2003, 09:16 PM

Quote:

Originally posted by ocbaud

stfu!

Damn Eric...you need anger management classes!! haha

PHOENIX · 03-14-2003, 01:22 PM

I just tell the ladies, its polished so well you can see your reflection on it

Izzy · 03-14-2003, 05:00 PM

I still need to cut down my shifter arm so my shift knob will fit.

twistedmetal · 03-15-2003, 05:46 AM

Dupli-color Metalcast paint goes great on all the other chrome goodies in the truck,check it out at your local hardware store.we use it on all our race sleds to give them kind of a custom look.the metalcast paint is exposed to high heat and extreme cold and seems to stay looking nice.this stuff gives a really nice colored chrome look to anything.

Quote:

"If Fall Guy only knew how many trucks i've wrecked,He'd be proud"

ocbaud · 03-19-2003, 03:36 AM

i was just thinking about this tonight. do you have the old style wiper controls on the dash? if not, how would i get the turn signal knob to control the wipers if i were to get some of theses?

LOHRTBT · 03-19-2003, 10:23 AM

Now you see why I dont have a billlet arm there Eric.

Just the cover for it.

ocbaud · 03-19-2003, 12:28 PM

Quote:

Originally posted by LOHRTBT
Now you see why I dont have a billlet arm there Eric. Just the cover for it.

hmm.... well that kinda upsets me

cause i dont even use the crusie control

it doesnt work:p

LOHRTBT · 03-19-2003, 12:31 PM

I dont have mine hooked up either.

ocbaud · 03-19-2003, 12:32 PM

Quote:

Originally posted by LOHRTBT
I dont have mine hooked up either.

but mine IS hooked up

PHOENIX · 03-19-2003, 01:04 PM

I have wipers on the dash

See it kinda pays to have a stripped down slightly older model.
I hate Fedex, they dont have jack on UPS's service. UPS will hit my house 2 times a day for one package if im not there. But Fedex will come once and leave a note for me to pick it up at their location or sign and take all responsibility. Well either way I should have the stuff today

I should have had it yesterday.

apstguy · 03-19-2003, 07:41 PM

Where did you get the wiper/turnsignal billet cover at? I have tryed looking for it but no one has it. Is it the same style that goes on 88-up?

Izzy · 03-20-2003, 06:48 PM

Quote:

Originally posted by apstguy
Where did you get the wiper/turnsignal billet cover at? I have tryed looking for it but no one has it. Is it the same style that goes on 88-up?

I don't think they make a model specific wiper knob but here are a couple universals:
Here are a couple style from Billet Specialties:

Here are some from Empire Motorsports:

LOHRTBT · 03-20-2003, 07:47 PM

I think that I got mine from www.parrautomotive.com

apstguy · 03-20-2003, 10:38 PM

Not a knob - I have mine on the turn signal lever. I want a cover that goes over the turnsignal, CC, & wipers.

LOHRTBT · 03-20-2003, 11:18 PM

That is what I am talking about..Izzy is the tool that is lost!! haha

03-13-2003, 03:53 PM	#1
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Billet Specialties turn lever and flasher knob ? I just ordered the turn signal lever and knob along with the hazard knob and bowtie shifter knob Anyway I have no problems with the turn knob or the shifter knob, my question is about the hazard knob. How do you remove and install a new one? Do you just remove that screw and it comes off? Some details on removal and installation would be helpful. Im sure its easy and Ill figure it out, but the boards slow and I figured Id through something out here Ohh yeah, anyone know where to find the ignition key release lever in aluminum? Thanks! __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

03-13-2003, 04:00 PM	#2
Low87 been here longer than Liz Join Date: Feb 2000 Location: Broken Arrow, OK Posts: 2,437	Are you just wanting to spend all your free time polishing???? I've never tried to remove the hazard pull, I'll look at it tonight and try to take it off. I'll let you know. __________________ ~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin

03-13-2003, 04:26 PM	#4
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	The hazard pull is easy...just get a phillips screwdriver and unscrew it. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

03-13-2003, 04:34 PM	#5
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Thought so, wasnt sure though I would still like to have a picture of how the grant steering wheel horns should be wired. I look at what I have and just dont get it. Im missing some stuff and dont know what. If someone could post a picture of their grant wheel horn installed and everything I would greatly appreciate it Im gonna try to dig into the truck this weekend, but I doubt Ill have the turn lever by then, so Ill wait to go into the column for that. EDIT: Ill just carry some polish and a rag, so when Im stuck in a line or at a stop light I can get my polish on For the curious heres a few pictures Little things make all the difference! __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION * Last edited by PHOENIX; 03-13-2003 at 04:41 PM.

03-13-2003, 04:45 PM	#6
AirMale Senior Member Join Date: Jan 2003 Location: Atlantic City, NJ Posts: 1,073	Did you just say you're gonna polish your knob at the stop light? That's just wrong! __________________ 86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction Last edited by AirMale; 03-13-2003 at 04:49 PM.

03-13-2003, 05:48 PM	#8
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	lmao!! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

03-13-2003, 07:16 PM	#10
ChrisK10 1971 C20 Custom Camper Join Date: Mar 2003 Location: Ames/Shenandoah, IA Posts: 1,435	ROFL! -Chris __________________ '71 Chevy C20 Custom Camper, 454, TH400 '97 GMC K1500 5.7L

03-14-2003, 01:22 PM	#12
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	I just tell the ladies, its polished so well you can see your reflection on it __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

03-14-2003, 05:00 PM	#13
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	I still need to cut down my shifter arm so my shift knob will fit.

03-19-2003, 03:36 AM	#15
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	i was just thinking about this tonight. do you have the old style wiper controls on the dash? if not, how would i get the turn signal knob to control the wipers if i were to get some of theses?

03-19-2003, 10:23 AM	#16
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Now you see why I dont have a billlet arm there Eric. Just the cover for it. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

03-19-2003, 12:31 PM	#18
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	I dont have mine hooked up either. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

03-19-2003, 01:04 PM	#20
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	I have wipers on the dash See it kinda pays to have a stripped down slightly older model. I hate Fedex, they dont have jack on UPS's service. UPS will hit my house 2 times a day for one package if im not there. But Fedex will come once and leave a note for me to pick it up at their location or sign and take all responsibility. Well either way I should have the stuff today I should have had it yesterday. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

03-19-2003, 07:41 PM	#21
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	Where did you get the wiper/turnsignal billet cover at? I have tryed looking for it but no one has it. Is it the same style that goes on 88-up? __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

03-20-2003, 07:47 PM	#23
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	I think that I got mine from www.parrautomotive.com __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84



Register or Log In To remove these advertisements.

03-20-2003, 10:38 PM	#24
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	Not a knob - I have mine on the turn signal lever. I want a cover that goes over the turnsignal, CC, & wipers. __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

03-20-2003, 11:18 PM	#25
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	That is what I am talking about..Izzy is the tool that is lost!! haha __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

Register or Log In To remove these advertisements.