What did you get done 1/30/11 edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 01-30-2011, 09:33 PM

THis week was bad for me. We had alot of snow ( again) and i ended up spinning out after being cut off by some idiot and i had to veer into a snow bank. While extracating myself from the snow bank i ripped off the front bumper on my daily driver. I kinda got disgusted at that point so i went to a shop and had them re attach the bumper then drove to a car dealer and bought myself a new car. The toyota was showing signs of wear at 60K and I was never truly estatic over it so i got myself a mini SUV. I know im gonna hear poop for this but i bought a 2011 Ford Escape and i gotta tell you, i love it. Its also 4wd and a four cylinder so it should get decent mileage
This purchase tho destroyed my chances of getting the second 82 GMC so i guess you win some and lose some

How about you all?

*Stitch* · 01-30-2011, 09:39 PM

gotta change your sig now Bob

1BadSS · 01-30-2011, 09:51 PM

Installed my new-to-me original dash pad, also threw one of my tach clusters in my truck. Went to LMC and picked up a new exhaust for the truck and a brand new passenger door.

CLASSIC87' · 01-30-2011, 10:06 PM

Weather was absolutely beautiful here... finally got little Casper out for a drive.

1BadSS · 01-30-2011, 10:08 PM

Quote:

Originally Posted by CLASSIC87'

Weather was absolutely beautiful here... finally got little Casper out for a drive.

Are you guys going to get the same amount of snow, if any. As we are getting up here? Latest forecast is 12+".

CLASSIC87' · 01-30-2011, 10:10 PM

Quote:

Originally Posted by 1BadSS

Are you guys going to get the same amount of snow, if any. As we are getting up here? Latest forecast is 12+".

Yeah suppose to start falling tomorrow... 6"-8" here by Tuesday.

Psycho71 · 01-30-2011, 10:06 PM

Got my mud tires mounted and bolted on, got the engine running in the burb (installed last weekend), topped of all the fluids, and took it for it's maiden voyage to the end of the street and back, twice.

Not a huge amount actually done, but a pretty major milestone in the build, for me anyway.

thecodeman · 01-30-2011, 10:09 PM

Was able to get my new to me 87 registered. Just need to get the blinker switch in the column fixed sand I can pass inspection.
Posted via Mobile Device

54Caddy · 01-30-2011, 10:12 PM

During the week i replaced my oil pan gasket thinking that was the cause of the leak turns out to be the rear main seal. Was going to change it out today but it is raining. Will be changing it tomorrow, and also will pick up my wheels from the powder coater tomorrow.

72BlckButy · 01-30-2011, 10:13 PM

12+ inches expected in Mid-MO including ice... is it summer yet?

Replaced the water heater and spent a little money on truck stuff.

SCOTI · 01-30-2011, 10:35 PM

I installed the rear inner bumper brackets for the sport bumper & a new front air-dam. I might try & get the door panels off sometime this week to install the 'door pull delete' trim plates & swap in a new pwr window motor for one of the doors.

bigd65 · 01-30-2011, 10:37 PM

Got my fuel gauge working and well on the way to getting the rest of the wiring straightened out

qu1cks1lver56 · 01-30-2011, 10:37 PM

Cleaned up my headlight wiring.

*87 chevy silverado* · 01-30-2011, 11:01 PM

got the my new motor to run for bout 30 mins.. then the oil sending unit blew wish i could post the video off my Facebook

Benelli · 01-30-2011, 11:14 PM

Might have just got mine sold

I can get something nice now, or at least nicer lol.

monte0185 · 01-30-2011, 11:18 PM

Dropped my truck finally and changed my rims.

bharrison1 · 02-01-2011, 10:53 AM

Quote:

Originally Posted by monte0185

Dropped my truck finally and changed my rims.

Looks great!!!!!!!

Sooner84 · 02-01-2011, 11:23 AM

Saturday got my 4ch amp and kicker 6 in speakers in the kick panels. Pics in build thread.
It was such a nice day i was wearing shorts and flip flops, so i cleaned up the truck and took it out for a few new pictures.

Name: DSCN0814.jpg
Views: 135
Size: 47.9 KB

Name: DSCN0814.jpg
Views: 135
Size: 47.9 KB

Name: DSCN0816.jpg
Views: 136
Size: 60.8 KB

monte0185 · 02-01-2011, 11:36 AM

Quote:

Originally Posted by Sooner84

Saturday got my 4ch amp and kicker 6 in speakers in the kick panels. Pics in build thread.
It was such a nice day i was wearing shorts and flip flops, so i cleaned up the truck and took it out for a few new pictures.

Attachment 692108

Attachment 692109

Like the paint job!! Was thinking of doing something pretty similar only with red and charcoal silvery/black color.

bigblock73 · 01-30-2011, 11:26 PM

Bucket seats all mocked up (inner brackets located, bucket seat holes drilled in the floor), wiring tidied up, just about ready to put the carpet in and re-install the seats and console. Getting closer

flamingbig10 · 01-30-2011, 11:36 PM

Today worked on some rust repair and found more than I expected

the rust on the braces is surface rust

THE "10" SILVERADO · 01-31-2011, 12:10 AM

Got my new hood on...

bayou boy · 01-31-2011, 12:21 AM

got my front clip off

**N2TRUX** · 01-31-2011, 12:36 AM

Welcome to the forum thecodeman.

Managed to get my pool cleaner apart and parts ordered for it. I ran calls all weekend so I didn't touch my truck.

85burb · 01-31-2011, 12:44 AM

Not sure if it counts but i finished my ls swap yester day.... cleaned bros garage up and parked in street to take to exhaust shop.

YouTube - engine start.mp4

01-30-2011, 09:33 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,345	What did you get done 1/30/11 edition THis week was bad for me. We had alot of snow ( again) and i ended up spinning out after being cut off by some idiot and i had to veer into a snow bank. While extracating myself from the snow bank i ripped off the front bumper on my daily driver. I kinda got disgusted at that point so i went to a shop and had them re attach the bumper then drove to a car dealer and bought myself a new car. The toyota was showing signs of wear at 60K and I was never truly estatic over it so i got myself a mini SUV. I know im gonna hear poop for this but i bought a 2011 Ford Escape and i gotta tell you, i love it. Its also 4wd and a four cylinder so it should get decent mileage This purchase tho destroyed my chances of getting the second 82 GMC so i guess you win some and lose some How about you all? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-30-2011, 09:39 PM	#2
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: What did you get done 1/30/11 edition gotta change your sig now Bob

01-30-2011, 09:51 PM	#3
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Re: What did you get done 1/30/11 edition Installed my new-to-me original dash pad, also threw one of my tach clusters in my truck. Went to LMC and picked up a new exhaust for the truck and a brand new passenger door. __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

01-30-2011, 10:06 PM	#4
CLASSIC87' OL BLUU Join Date: Mar 2004 Location: WICHITA, KS. Posts: 1,065	Re: What did you get done 1/30/11 edition Weather was absolutely beautiful here... finally got little Casper out for a drive. Attached Images __________________ More Drop and pics... whatch'a think?: http://67-72chevytrucks.com/vboard/s...d.php?t=249927 My recent 2wd Blazer progress thread: http://67-72chevytrucks.com/vboard/s...d.php?t=393427 http://67-72chevytrucks.com/vboard/s...d.php?t=394870 Last edited by CLASSIC87'; 01-30-2011 at 10:07 PM.

01-30-2011, 10:06 PM	#7
Psycho71 Registered User Join Date: Jan 2006 Location: Kaufman, Tx Posts: 827	Re: What did you get done 1/30/11 edition Got my mud tires mounted and bolted on, got the engine running in the burb (installed last weekend), topped of all the fluids, and took it for it's maiden voyage to the end of the street and back, twice. Not a huge amount actually done, but a pretty major milestone in the build, for me anyway. __________________ You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels!

01-30-2011, 10:09 PM	#8
thecodeman Registered User Join Date: Jan 2011 Location: Dallas, Texas Posts: 8	Re: What did you get done 1/30/11 edition Was able to get my new to me 87 registered. Just need to get the blinker switch in the column fixed sand I can pass inspection. Posted via Mobile Device

01-30-2011, 10:12 PM	#9
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,296	Re: What did you get done 1/30/11 edition During the week i replaced my oil pan gasket thinking that was the cause of the leak turns out to be the rear main seal. Was going to change it out today but it is raining. Will be changing it tomorrow, and also will pick up my wheels from the powder coater tomorrow. __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

01-30-2011, 10:13 PM	#10
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: What did you get done 1/30/11 edition 12+ inches expected in Mid-MO including ice... is it summer yet? Replaced the water heater and spent a little money on truck stuff. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

01-30-2011, 10:35 PM	#11
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,143	Re: What did you get done 1/30/11 edition I installed the rear inner bumper brackets for the sport bumper & a new front air-dam. I might try & get the door panels off sometime this week to install the 'door pull delete' trim plates & swap in a new pwr window motor for one of the doors. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-30-2011, 10:37 PM	#12
bigd65 Registered User Join Date: Mar 2000 Location: Clute, TX. Posts: 1,938	Re: What did you get done 1/30/11 edition Got my fuel gauge working and well on the way to getting the rest of the wiring straightened out __________________ 2004 Silverado Crewcab 1972 Chevy Monte Carlo 2017 Chevy Tahoe

01-30-2011, 10:37 PM	#13
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: What did you get done 1/30/11 edition Cleaned up my headlight wiring. __________________ My 86 http://67-72chevytrucks.com/vboard/s...d.php?t=375526

01-30-2011, 11:01 PM	#14
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: What did you get done 1/30/11 edition got the my new motor to run for bout 30 mins.. then the oil sending unit blew wish i could post the video off my Facebook Last edited by 87 chevy silverado; 01-30-2011 at 11:01 PM.

01-30-2011, 11:14 PM	#15
Benelli Watchin the rust grow Join Date: Oct 2008 Location: Western Nebraska Posts: 950	Re: What did you get done 1/30/11 edition Might have just got mine sold I can get something nice now, or at least nicer lol. __________________ 1979 Chevy K10 (H/D Front end) - 350 w/ Holley Truck Avenger, Weinald Intake manifold, headers, bored .060 over, mild cam, Built up TH350 (TranStar Shift kit) with a part-timed NP203 t-case SOLD ($3,000) 1997 Chevy Silverado 1500 - 4.3 vortec, extended cab, 21 highway MPG, stock. "Red" SOLD ($3,000) 1987 Toyota 4wd Pick-up - work in progress, future DD SOLD ($1,850) 1998 Dodge Ram 2500 Cummins 5spd Quad cab - old 12 valve with some work done 2004 Chevy Silverado - Black, 4x4, 5.3L, stock for now Underneath that rust is a heart of gold

01-30-2011, 11:18 PM	#16
monte0185 Registered User Join Date: Oct 2008 Location: Brighton, TN Posts: 1,267	Re: What did you get done 1/30/11 edition Dropped my truck finally and changed my rims. __________________ A computer once beat me at chess, but it was no match for me at kick boxing. Duct tape is like the force. It has a light side, a dark side, and it holds the world together.

02-01-2011, 11:23 AM	#18
Sooner84 Registered User Join Date: Dec 2009 Location: Moore, Oklahoma Posts: 379	Re: What did you get done 1/30/11 edition Saturday got my 4ch amp and kicker 6 in speakers in the kick panels. Pics in build thread. It was such a nice day i was wearing shorts and flip flops, so i cleaned up the truck and took it out for a few new pictures. __________________ 1984 chevy swb(1st truck, sold..) 2001 RCSB silverado, 5.3 with a little extra 2004 ECSB Silverado LT, 5.3 cam & bolt ons, 4l60e shift kit/stall, g80 & 3.73s My first (1984 c10) Build



Register or Log In To remove these advertisements.

01-30-2011, 11:26 PM	#20
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: What did you get done 1/30/11 edition Bucket seats all mocked up (inner brackets located, bucket seat holes drilled in the floor), wiring tidied up, just about ready to put the carpet in and re-install the seats and console. Getting closer __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

01-30-2011, 11:36 PM	#21
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: What did you get done 1/30/11 edition Today worked on some rust repair and found more than I expected the rust on the braces is surface rust __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

01-31-2011, 12:10 AM	#22
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: What did you get done 1/30/11 edition Got my new hood on... Attached Images __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9

01-31-2011, 12:21 AM	#23
bayou boy Registered User Join Date: Oct 2010 Location: Frankston Tx Posts: 151	Re: What did you get done 1/30/11 edition got my front clip off Attached Images

01-31-2011, 12:36 AM	#24
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: What did you get done 1/30/11 edition Welcome to the forum thecodeman. Managed to get my pool cleaner apart and parts ordered for it. I ran calls all weekend so I didn't touch my truck. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

Register or Log In To remove these advertisements.