tonneau cover with cage? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dbmx66 · 02-04-2011, 03:38 PM

im thinking about making a tonneau cover for my bed out of aluminum sheet metal. i have a design on how to support it and so its removable and stuff, only problem is what should i do if i have two tubes welded out the cab into the rear frame. how do i make it go around?

dbmx66 · 02-04-2011, 03:39 PM

something like this

oldschool53_BBC · 02-04-2011, 06:12 PM

Quote:

Originally Posted by dbmx66

something like this

That will be awesome...just dont have any idea how..good luck

dbmx66 · 02-05-2011, 12:01 AM

Quote:

Originally Posted by oldschool53_BBC

That will be awesome...just dont have any idea how..good luck

thanks lol im gonna need it! hahaha

**Captainfab** · 02-05-2011, 01:06 AM

You're going to have to have a joint right where the rear tubes pass thru the cover. You will have to make either half round notches, or longer slots for the tubes. Depends on how the joint lays in relation to the tubes.

dbmx66 · 02-05-2011, 02:04 AM

Quote:

Originally Posted by Captainfab

You're going to have to have a joint right where the rear tubes pass thru the cover. You will have to make either half round notches, or longer slots for the tubes. Depends on how the joint lays in relation to the tubes.

you have any pictures for reference?

bigboybodry · 02-06-2011, 01:16 PM

Quote:

Originally Posted by dbmx66

something like this

That is a great looking truck, were could I find more pics./info on it? I am looking for ideas etc... for my build.

dbmx66 · 02-06-2011, 07:36 PM

Quote:

Originally Posted by bigboybodry

That is a great looking truck, were could I find more pics./info on it? I am looking for ideas etc... for my build.

this thing is nasty... heres a link...

http://www.treetimekennels.com/FILE%...ACING/race.htm

*low&slow* · 02-16-2011, 11:53 PM

Quote:

Originally Posted by dbmx66

something like this

Do you know whose truck this is? Or where I can go to look at this truck in more detail?

dbmx66 · 02-17-2011, 12:04 AM

Quote:

Originally Posted by low&slow

Do you know whose truck this is? Or where I can go to look at this truck in more detail?

i made a post above that had a link of it there, there plenty of pictures on the link

team39763 · 02-06-2011, 10:26 AM

What thickness/grade of aluminum should be used? Or should it be steel?

69trk · 02-06-2011, 10:36 AM

I have a vinyl cover that i'm going have to have stiched with snaps when i do my cage. I think it would look better than aluminum

djracer · 02-07-2011, 12:09 AM

I have a few pics in my build thread of my cover build.

http://67-72chevytrucks.com/vboard/s...151718&page=18

dbmx66 · 02-07-2011, 02:34 AM

Quote:

Originally Posted by djracer

I have a few pics in my build thread of my cover build.

http://67-72chevytrucks.com/vboard/s...151718&page=18

i can kinda see what you did, thats pretty much what im going for.

i want it level with the top of the bedsides and still be removable.

can you give me some details how you went about doing it?

thanks

djracer · 02-17-2011, 12:03 AM

A friend that owns a sign shop helped me build mine. Its made from black sign blanks that were cut into sections and bent for strength. It has some square tubing for added strength. Its removable but not very easy. The rear section flips up to access the fuel cell, batteries and fuel pump.

bigboybodry · 02-18-2011, 10:54 PM

hows the cover coming

dbmx66 · 02-19-2011, 10:32 PM

Quote:

Originally Posted by bigboybodry

hows the cover coming

lol still havent figured out how im gonna pull it off

*stich626* · 02-21-2011, 11:25 AM

if you have the tubes come down at the correct angle (unless set by rules)
you can have a cover that lift up as the hole follows the angle of the tube..
make it like this and 2 piece flanged at the holes center line, and you'll have a removable and lift up (with hinges, like gaylords) to make it easy to load and unload at the track, or for parts runs, and still come off for servicing or if you need to load something taller than the bed sides..
note holes may need to have a little bit of an oval shape to them, but.
you'll have a hinged cover that comes off if need be

dbmx66 · 02-21-2011, 04:08 PM

Quote:

Originally Posted by stich626

if you have the tubes come down at the correct angle (unless set by rules)
you can gave a cover that lift up as the hole follows the angle of the tube..
make it like this and 2 piece flanged at the holes center line, and you'll have a removable and lift up (with hinges, like gaylords) to make it easy to load and unload at the track, or for parts runs, and still come off for servicing or if you need to load something taller than the bed sides..
note holes may need to have a little bit of an oval shape to them, but.
you'll have a hinged cover that comes off if need be

thats actually a good idea. i think i might look into that, thanks!

djracer · 02-21-2011, 08:32 PM

This guy use to make custom covers I'm not sure if he still does.

http://s10dragracer.com/TravisBurney.htm

dbmx66 · 02-21-2011, 11:56 PM

Quote:

Originally Posted by djracer

This guy use to make custom covers I'm not sure if he still does.

http://s10dragracer.com/TravisBurney.htm

i emailed him, hopefully i get some ideas.

02-04-2011, 03:38 PM	#1
dbmx66 Registered User Join Date: Aug 2009 Location: PA Posts: 883	tonneau cover with cage? im thinking about making a tonneau cover for my bed out of aluminum sheet metal. i have a design on how to support it and so its removable and stuff, only problem is what should i do if i have two tubes welded out the cab into the rear frame. how do i make it go around?

02-04-2011, 03:39 PM	#2
dbmx66 Registered User Join Date: Aug 2009 Location: PA Posts: 883	Re: tonneau cover with cage? something like this Attached Images

02-05-2011, 01:06 AM	#5
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: tonneau cover with cage? You're going to have to have a joint right where the rear tubes pass thru the cover. You will have to make either half round notches, or longer slots for the tubes. Depends on how the joint lays in relation to the tubes. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

02-06-2011, 10:26 AM	#11
team39763 Registered User Join Date: Feb 2007 Location: Texas Posts: 469	Re: tonneau cover with cage? What thickness/grade of aluminum should be used? Or should it be steel? __________________ 1982 Silverado - SBE, cleaned up GM heads, small cam, TH350, 850 Demon, 4.56 gears, and caltracs. Best time so far 11.8@XXXMPH Last edited by team39763; 02-06-2011 at 10:27 AM.

02-06-2011, 10:36 AM	#12
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: tonneau cover with cage? I have a vinyl cover that i'm going have to have stiched with snaps when i do my cage. I think it would look better than aluminum Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

02-07-2011, 12:09 AM	#13
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: tonneau cover with cage? I have a few pics in my build thread of my cover build. http://67-72chevytrucks.com/vboard/s...151718&page=18 __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-17-2011, 12:03 AM	#15
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: tonneau cover with cage? A friend that owns a sign shop helped me build mine. Its made from black sign blanks that were cut into sections and bent for strength. It has some square tubing for added strength. Its removable but not very easy. The rear section flips up to access the fuel cell, batteries and fuel pump. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-18-2011, 10:54 PM	#16
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: tonneau cover with cage? hows the cover coming __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

02-21-2011, 11:25 AM	#18
stich626 Account Suspended Join Date: Sep 2010 Location: hingham ma Posts: 1,721	Re: tonneau cover with cage? if you have the tubes come down at the correct angle (unless set by rules) you can have a cover that lift up as the hole follows the angle of the tube.. make it like this and 2 piece flanged at the holes center line, and you'll have a removable and lift up (with hinges, like gaylords) to make it easy to load and unload at the track, or for parts runs, and still come off for servicing or if you need to load something taller than the bed sides.. note holes may need to have a little bit of an oval shape to them, but. you'll have a hinged cover that comes off if need be Last edited by stich626; 02-21-2011 at 04:21 PM.

02-21-2011, 08:32 PM	#20
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: tonneau cover with cage? This guy use to make custom covers I'm not sure if he still does. http://s10dragracer.com/TravisBurney.htm __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.