CA Parting 73 4x4 1/2 ton short bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 02-05-2011, 12:41 PM

I just pulled this truck down from the mountains. Its in pretty rough shape, but has some useable parts. I will be pulling apart in the next week.

axles 44 front, 12 bolt rear- $400 pair local

tilt column- $80 plus shipping

seat- $40 local

instrument bezel- $30 plus shipping

fender emblems- $26 shipped

4x4 short bed frame- $200 local

door panels- $30 pair plus shipping

HEI- $40 plus shipping

If you see any other parts you want, please ask in thread to avoid confusion.
Thanks, Ray

KrazyRay · 02-05-2011, 12:43 PM

2222

KrazyRay · 02-05-2011, 12:45 PM

3333

villa 66 · 02-05-2011, 03:25 PM

How much for steering column shipped too Tx. 78570? Thanks

SBTork · 02-05-2011, 05:19 PM

the grille looks to be in o.k. shape, what would you want for it?

KrazyRay · 02-06-2011, 01:34 AM

Quote:

Originally Posted by SBTork

the grille looks to be in o.k. shape, what would you want for it?

The grille is in good shape. $53 shipped to WI
Thanks, Ray

KrazyRay · 02-06-2011, 01:48 AM

glimmertwin01, the pass side is better than the driver side... will get pics of driver side. Headlight bezels are good. $10 each plus shipping, $5 each plus shipping for the amber lenses. I'm checking into the bed steps...they might be factory. A lot of gold here in CA, I should haul a huge load to Carlisle swap meet.

Mark, I will check for key and I may still have a 74 tilt stowed away. $105 shipped if everything is good.

I'll be away from this truck until Wed. but I will try to answer questions.
Thanks, Ray

c1069 · 02-06-2011, 12:08 PM

the cab is for sale. thanks

glimmertwin01 · 02-05-2011, 08:56 PM

I guess its rough for CA round here id think i found a gold mine! LOL

head light bezels nice?
is the wood grain on the door panels nice?

glimmertwin01 · 02-05-2011, 08:58 PM

amber front turn signal lenses?
kinda like the funky lil steps in the bed sides..never saw those before

HOTFUN · 02-05-2011, 11:35 PM

Also interested in the steering column shipped to 68467 and do you have the key for it? Also is the column tight and the turn signal wiring will be just unplugged from the connector under the dash so no cut or spliced wired? Thanks, Mark

HOTFUN · 02-06-2011, 12:38 PM

Sounds good I'm looking for a nice tilt auto column from a 73 or 74. Uncut harness and with key. Also I need a headlight switch nut that tightens and holds the switch to the dash from a 75 up style? You can see this nut behind the knob/rod on the 75-78. Thanks, Mark

dozerman · 02-06-2011, 12:41 PM

I would get in line for the grill.What about trans/transfer?

spudz · 02-07-2011, 01:38 AM

I am interested in the grill center support and outer brackets from this truck or the jimmy you are parting out. Everything thats needed to install older grill onto 75-80 trucks.

KrazyRay · 02-07-2011, 01:54 AM

c1069- the cab will be for sale...When I get clean CA title on non op...bare cab with title will be $250

HOTFUN- I should find out Wed...I also have a 77 cab I can look at for the nut.

dozerman- 2nd in line for grille...th350/205...I will try to run/drive this truck Wed. to see if any thing works.

spudz- $25 plus shipping...I should have it covered between the 2 trucks.

Thanks, Ray

KrazyRay · 02-09-2011, 11:16 PM

Quote:

Originally Posted by spudz

I am interested in the grill center support and outer brackets from this truck or the jimmy you are parting out. Everything thats needed to install older grill onto 75-80 trucks.

Its $12 to ship to SC for a total of $37 shipped.
Thanks, Ray

spudz has passed on the grille supports. SALE PENDING TO ANOTHER MEMBER

spudz · 02-07-2011, 02:11 AM

That sounds good. Can I get price shipped to 29477 sc
Posted via Mobile Device

**71blksuper4x4** · 02-07-2011, 09:49 AM

I'd like to get in line for the bed side steps. Trevor

centexan · 02-07-2011, 06:33 PM

I'd like to find out shipping on the door panels to 78758 business address. Thanks!

KrazyRay · 02-07-2011, 11:30 PM

I will have answers wed. when I get back to the truck.
Thanks, Ray

c1069 · 02-07-2011, 11:38 PM

It's a clean cab? No rust Please send pics to fj_rivetza83@hotmail.com

KrazyRay · 02-09-2011, 11:18 PM

Quote:

Originally Posted by c1069

It's a clean cab? No rust Please send pics to fj_rivetza83@hotmail.com

Sorry, the cab has rust.

c1069 · 02-10-2011, 08:51 PM

Quote:

Originally Posted by KrazyRay

Sorry, the cab has rust.

Thanks.

bigblock73 · 02-08-2011, 11:36 PM

Is spudz getting BOTH the grill bracketry from this truck AND the Jimmy? I am interested in one of them if he isn't. Center support and outer brackets.

KrazyRay · 02-09-2011, 01:05 AM

Quote:

Originally Posted by bigblock73

Is spudz getting BOTH the grill bracketry from this truck AND the Jimmy? I am interested in one of them if he isn't. Center support and outer brackets.

I think he just wants one.

02-05-2011, 12:41 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting 73 4x4 1/2 ton short bed I just pulled this truck down from the mountains. Its in pretty rough shape, but has some useable parts. I will be pulling apart in the next week. axles 44 front, 12 bolt rear- $400 pair local tilt column- $80 plus shipping seat- $40 local instrument bezel- $30 plus shipping fender emblems- $26 shipped 4x4 short bed frame- $200 local door panels- $30 pair plus shipping HEI- $40 plus shipping If you see any other parts you want, please ask in thread to avoid confusion. Thanks, Ray Attached Images

02-05-2011, 12:43 PM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 73 4x4 1/2 ton short bed 2222 Attached Images

02-05-2011, 12:45 PM	#3
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 73 4x4 1/2 ton short bed 3333 Attached Images

02-05-2011, 03:25 PM	#4
villa 66 Registered User Join Date: May 2009 Location: MERCEDES,TEXAS Posts: 146	Re: Parting 73 4x4 1/2 ton short bed How much for steering column shipped too Tx. 78570? Thanks

02-05-2011, 05:19 PM	#5
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: Parting 73 4x4 1/2 ton short bed the grille looks to be in o.k. shape, what would you want for it? __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

02-06-2011, 01:48 AM	#7
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 73 4x4 1/2 ton short bed glimmertwin01, the pass side is better than the driver side... will get pics of driver side. Headlight bezels are good. $10 each plus shipping, $5 each plus shipping for the amber lenses. I'm checking into the bed steps...they might be factory. A lot of gold here in CA, I should haul a huge load to Carlisle swap meet. Mark, I will check for key and I may still have a 74 tilt stowed away. $105 shipped if everything is good. I'll be away from this truck until Wed. but I will try to answer questions. Thanks, Ray Last edited by KrazyRay; 02-06-2011 at 01:49 AM.

02-06-2011, 12:08 PM	#8
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: Parting 73 4x4 1/2 ton short bed the cab is for sale. thanks __________________ Pancho 69 c/10 step side 454/400 with 3.07

02-05-2011, 08:56 PM	#9
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting 73 4x4 1/2 ton short bed I guess its rough for CA round here id think i found a gold mine! LOL head light bezels nice? is the wood grain on the door panels nice? __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

02-05-2011, 08:58 PM	#10
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting 73 4x4 1/2 ton short bed amber front turn signal lenses? kinda like the funky lil steps in the bed sides..never saw those before __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

02-05-2011, 11:35 PM	#11
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: Parting 73 4x4 1/2 ton short bed Also interested in the steering column shipped to 68467 and do you have the key for it? Also is the column tight and the turn signal wiring will be just unplugged from the connector under the dash so no cut or spliced wired? Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

02-06-2011, 12:38 PM	#12
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: Parting 73 4x4 1/2 ton short bed Sounds good I'm looking for a nice tilt auto column from a 73 or 74. Uncut harness and with key. Also I need a headlight switch nut that tightens and holds the switch to the dash from a 75 up style? You can see this nut behind the knob/rod on the 75-78. Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

02-06-2011, 12:41 PM	#13
dozerman Registered User Join Date: Dec 2010 Location: Groveland ca Posts: 224	Re: Parting 73 4x4 1/2 ton short bed I would get in line for the grill.What about trans/transfer?

02-07-2011, 01:38 AM	#14
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: Parting 73 4x4 1/2 ton short bed I am interested in the grill center support and outer brackets from this truck or the jimmy you are parting out. Everything thats needed to install older grill onto 75-80 trucks. __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

02-07-2011, 01:54 AM	#15
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 73 4x4 1/2 ton short bed c1069- the cab will be for sale...When I get clean CA title on non op...bare cab with title will be $250 HOTFUN- I should find out Wed...I also have a 77 cab I can look at for the nut. dozerman- 2nd in line for grille...th350/205...I will try to run/drive this truck Wed. to see if any thing works. spudz- $25 plus shipping...I should have it covered between the 2 trucks. Thanks, Ray

02-07-2011, 02:11 AM	#17
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: Parting 73 4x4 1/2 ton short bed That sounds good. Can I get price shipped to 29477 sc Posted via Mobile Device __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..



Register or Log In To remove these advertisements.

02-07-2011, 09:49 AM	#18
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Parting 73 4x4 1/2 ton short bed I'd like to get in line for the bed side steps. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

02-07-2011, 06:33 PM	#19
centexan Registered User Join Date: Aug 2006 Location: Austin, Texas Posts: 167	Re: Parting 73 4x4 1/2 ton short bed I'd like to find out shipping on the door panels to 78758 business address. Thanks! __________________ 1989 Chevy Suburban v1500

02-07-2011, 11:30 PM	#20
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 73 4x4 1/2 ton short bed I will have answers wed. when I get back to the truck. Thanks, Ray

02-07-2011, 11:38 PM	#21
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: Parting 73 4x4 1/2 ton short bed It's a clean cab? No rust Please send pics to fj_rivetza83@hotmail.com __________________ Pancho 69 c/10 step side 454/400 with 3.07 Last edited by c1069; 02-07-2011 at 11:39 PM.

02-08-2011, 11:36 PM	#24
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: Parting 73 4x4 1/2 ton short bed Is spudz getting BOTH the grill bracketry from this truck AND the Jimmy? I am interested in one of them if he isn't. Center support and outer brackets. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

Register or Log In To remove these advertisements.