KS Big block pullies 2 sets one for 402 one for 427 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 02-05-2011, 02:58 PM

I've got one set water pump and crank pullies off a 402 for $76 shipped
and I have the 2 crank pullies off a 69 427 impala motor for $76 shipped

VA72C10 · 02-05-2011, 06:57 PM

do you have a complete set for ps? If so, can you sell that with the brackets you also have listed? If so, how much shipped together? I basically need an entire setup of brackets for a 402 big block w/ A/C and PS...(have to check as I might still have the A/C brackets....Thanks

teeitup · 02-05-2011, 07:04 PM

If you wanted 402 pullies and other BB stuff in other thread, I can see if I can get them all in a $11 flat rate so I could knock off $11 off total. Thanks Randy

teeitup · 02-05-2011, 07:17 PM

I can get the other BB stuff and these 402 pullies in a $11 flat rate box Jonathan $136 total. Thanks let me know, Randy

VA72C10 · 02-05-2011, 08:36 PM

Thanks Randy, I will let you know asap but if someone else wants them I'll step out of line. I am not sure what all is there or not...was supposed to look at the truck and big block tonight but it will be tomorrow evening now...the sad part is I had everything and sold it for less than I should have several months ago because at the time I wasn't considering a BB project

teeitup · 02-06-2011, 01:44 AM

Sounds good Jonathan, just let me know, Randy

teeitup · 02-07-2011, 12:34 AM

ttttttttttttttt

VA72C10 · 02-07-2011, 12:36 AM

I'm gonna pass....going to go with modern parts instead of the originals. thanks and best wishes on the sale!

teeitup · 02-10-2011, 08:06 PM

ttttttt

VA72C10 · 02-12-2011, 02:27 AM

ttt for you!

teeitup · 02-26-2011, 08:48 PM

back to the top!!

teeitup · 03-08-2011, 07:38 PM

tttttttttttt

dos0711 · 03-08-2011, 07:44 PM

I'll take the 402 pulleys...paypal?
Posted via Mobile Device

teeitup · 03-08-2011, 07:53 PM

info sent, THANKS, Randy

dos0711 · 03-08-2011, 08:32 PM

You have mail!
Posted via Mobile Device

teeitup · 03-08-2011, 09:25 PM

David, PM'd you wrong amount sent to pay pal. Thanks let me know, Randy

dos0711 · 03-08-2011, 10:20 PM

Still available
Posted via Mobile Device

teeitup · 03-08-2011, 10:28 PM

I refunded your money David, Thanks Randy

teeitup · 03-08-2011, 10:29 PM

Guys, Both sets are still for sale. Thanks Randy

dos0711 · 03-09-2011, 06:09 AM

I'll take the 402 pulleys after all...you've got payment!
Posted via Mobile Device

dos0711 · 03-15-2011, 08:16 AM

402 pulleys are mine! Bump for the other set...

02-05-2011, 02:58 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Big block pullies 2 sets one for 402 one for 427 I've got one set water pump and crank pullies off a 402 for $76 shipped and I have the 2 crank pullies off a 69 427 impala motor for $76 shipped Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 02-05-2011 at 02:58 PM.

02-05-2011, 06:57 PM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Big block pullies 2 sets one for 402 one for 427 do you have a complete set for ps? If so, can you sell that with the brackets you also have listed? If so, how much shipped together? I basically need an entire setup of brackets for a 402 big block w/ A/C and PS...(have to check as I might still have the A/C brackets....Thanks __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-05-2011, 07:04 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Big block pullies 2 sets one for 402 one for 427 If you wanted 402 pullies and other BB stuff in other thread, I can see if I can get them all in a $11 flat rate so I could knock off $11 off total. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-05-2011, 07:17 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Big block pullies 2 sets one for 402 one for 427 I can get the other BB stuff and these 402 pullies in a $11 flat rate box Jonathan $136 total. Thanks let me know, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-05-2011, 08:36 PM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Big block pullies 2 sets one for 402 one for 427 Thanks Randy, I will let you know asap but if someone else wants them I'll step out of line. I am not sure what all is there or not...was supposed to look at the truck and big block tonight but it will be tomorrow evening now...the sad part is I had everything and sold it for less than I should have several months ago because at the time I wasn't considering a BB project __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-06-2011, 01:44 AM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Big block pullies 2 sets one for 402 one for 427 Sounds good Jonathan, just let me know, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-07-2011, 12:34 AM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Big block pullies 2 sets one for 402 one for 427 ttttttttttttttt __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-07-2011, 12:36 AM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Big block pullies 2 sets one for 402 one for 427 I'm gonna pass....going to go with modern parts instead of the originals. thanks and best wishes on the sale! __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-10-2011, 08:06 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Big block pullies 2 sets one for 402 one for 427 ttttttt __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-12-2011, 02:27 AM	#10
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Big block pullies 2 sets one for 402 one for 427 ttt for you! __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-26-2011, 08:48 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Big block pullies 2 sets one for 402 one for 427 back to the top!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-08-2011, 07:38 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Big block pullies 2 sets one for 402 one for 427 tttttttttttt __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-08-2011, 07:44 PM	#13
dos0711 Registered User Join Date: Feb 2011 Location: Jacksonville,Fl Posts: 131	Re: Big block pullies 2 sets one for 402 one for 427 I'll take the 402 pulleys...paypal? Posted via Mobile Device Last edited by dos0711; 03-08-2011 at 07:45 PM.

03-08-2011, 07:53 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Big block pullies 2 sets one for 402 one for 427 info sent, THANKS, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-08-2011, 08:32 PM	#15
dos0711 Registered User Join Date: Feb 2011 Location: Jacksonville,Fl Posts: 131	Re: Big block pullies 2 sets one for 402 one for 427 You have mail! Posted via Mobile Device



Register or Log In To remove these advertisements.

03-08-2011, 09:25 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Big block pullies 2 sets one for 402 one for 427 David, PM'd you wrong amount sent to pay pal. Thanks let me know, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-08-2011, 10:20 PM	#17
dos0711 Registered User Join Date: Feb 2011 Location: Jacksonville,Fl Posts: 131	Re: Big block pullies 2 sets one for 402 one for 427 Still available Posted via Mobile Device

03-08-2011, 10:28 PM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Big block pullies 2 sets one for 402 one for 427 I refunded your money David, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-08-2011, 10:29 PM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Big block pullies 2 sets one for 402 one for 427 Guys, Both sets are still for sale. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-09-2011, 06:09 AM	#20
dos0711 Registered User Join Date: Feb 2011 Location: Jacksonville,Fl Posts: 131	Re: Big block pullies 2 sets one for 402 one for 427 I'll take the 402 pulleys after all...you've got payment! Posted via Mobile Device

03-15-2011, 08:16 AM	#21
dos0711 Registered User Join Date: Feb 2011 Location: Jacksonville,Fl Posts: 131	Re: Big block pullies 2 sets one for 402 one for 427 402 pulleys are mine! Bump for the other set...

Register or Log In To remove these advertisements.