Re: Welding Slag/chipping hammer: spring vs. wood - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*C-10 simplex* · 02-06-2011, 03:10 AM

RE: welding:

Slag/chipping hammers-----spring wire vs. wood and why?

Tx Firefighter · 02-06-2011, 09:46 AM

I use the ones with the coil spring around the handle. They last a lifetime.

But, for a huge majority of slag removal (I do a LOT of stick welding), I use one of these...

on one of these...

I often burn 10 pounds of welding rod a day so I don't like to waste much time monkeying with slag removal.

crushermechanic · 02-06-2011, 11:41 PM

i have found a needle scaler works better than a slag hammer. the mini harbor freight model works pretty good and see a lot of use.

02-06-2011, 03:10 AM	#1
C-10 simplex Account Suspended Join Date: Dec 2008 Location: indisclosed Posts: 1,515	Re: Welding Slag/chipping hammer: spring vs. wood RE: welding: Slag/chipping hammers-----spring wire vs. wood and why?

02-06-2011, 09:46 AM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Welding Slag/chipping hammer: spring vs. wood I use the ones with the coil spring around the handle. They last a lifetime. But, for a huge majority of slag removal (I do a LOT of stick welding), I use one of these... on one of these... I often burn 10 pounds of welding rod a day so I don't like to waste much time monkeying with slag removal. __________________ I'm on the Instagram- @Gearhead_Kevin Last edited by Tx Firefighter; 02-06-2011 at 09:47 AM.

02-06-2011, 11:41 PM	#3
crushermechanic Registered User Join Date: Dec 2009 Location: Fort Walton Beach, Fl Posts: 361	Re: Welding Slag/chipping hammer: spring vs. wood i have found a needle scaler works better than a slag hammer. the mini harbor freight model works pretty good and see a lot of use.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.