|
|
|
03-16-2003, 09:36 PM
|
#1 |
|
Registered User
Join Date: Dec 1999
Location: New York
Posts: 288
|
Pulling pitman arm
Has anyone used a plain gear puller to pull a pitman arm? Any luck? Any advice?
__________________
RLTW 70C10 72K10 72K10 Cheyenne 72C10 Cheyenne Super |
|
|
|
03-16-2003, 09:51 PM
|
#2 |
|
Registered User
Join Date: Jan 2001
Location: Killingworth, CT. USA
Posts: 3,378
|
In general they are on quite tight, a regular puller will probably spread the jaws and pop off, but try it first. I use a puller designed for that purpose.
__________________
1971 C10 swb stepside 350/700R4/3.73posi (retired as of 4/22/03) 1998 S10 short bed 2002 S10 Blazer 1942 Oldsmobile 1958 Massey Harris Pony 1951 Wife Killingworth, Connecticut May those who love us, love us, any of those who do not love us, may God turn their hearts. And if God is unable to turn their hearts, may he turn their ankles so we may know them by their limping. A man who works with his hands is a laborer; a man who works with his hands and his brain is a craftsman; but a man who works with his hands and his brain and his heart is an artist. |
|
|
|
|
03-16-2003, 10:10 PM
|
#3 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
i've used a gearpuller to remove pitman arms the thing to keep in mind with a gear puller is they're not designed to work by just screwing it down the proper way to use them is to screw them down to moderate pressure then rap the end with a hammer and repeat the process if you just tighten them with a wrench you can and will evenyually strip the threads
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
03-16-2003, 11:08 PM
|
#4 |
|
Senior Member
 
Join Date: Sep 2001
Location: Seattle, WA, USA
Posts: 5,817
|
Buy a pitman arm puller. It's a must. Don't screw around trying to get it off with some half-assed puller. It's not worth messing up the pitman arm, or your steering box output shaft.
__________________
'69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA. |
|
|
|
|
03-16-2003, 11:16 PM
|
#5 |
|
aka Crusher, Crushergmc
Join Date: Mar 2000
Location: Oregon
Posts: 1,834
|
I pulled mine of at least 3 times Friday using a pickle fork (see my post on the suspension board for the "why"). I have access to air so it was real easy. I wouldn't hesitate to use a manual fork and a BFH (Big Freakin' Hammer). Just go easy on the splines. Maybe a shop rag around the shaft would work. Good Luck.
__________________
"KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window "It's funny till someone gets hurt, then it's freakin' hilarious" |
|
|
|
|
03-17-2003, 02:27 AM
|
#6 |
|
Now the others dig........
Join Date: May 2002
Location: San Antonio, TX
Posts: 1,520
|
Pitman arm pullers....
you can rent 'em for a good price, but they are cheaper if you just buy it. @ auto zone you get all your money back after you return a rented one.
__________________
68 Chevy C10 Stepside Black Primer 78 GMC Longbed White 09 Chevy Silverado Shortbed Granite Blue LOOKING FOR A 67 4 DOOR IMPALA!!!  Just like Sam and Dean Winchester!! 'Cause Mustangs are for p^**#$ and you can fit a body in the trunk of a 67 ImpalaMEMBER OF THE DRUM BRAKE CLUB Bachelor of Music in Jazz Studies Texas State University-San Marcos, TX Certified Music Educator I hope Mom is up there watching and being my Guardian Angel "I've got a fever.....and the only prescription.....IS MORE COW BELL" -The Legendary: Bruce Dickenson "F#$@ 'em up!!!!!!" -The Legendary: Rogelio Escobar  TRUCKY LINKS http://67-72chevytrucks.com/vboard/s...d.php?t=457750 http://67-72chevytrucks.com/vboard/s...d.php?t=461184 http://67-72chevytrucks.com/vboard/s...d.php?t=472848 http://67-72chevytrucks.com/vboard/s...d.php?t=417541 http://67-72chevytrucks.com/vboard/s...d.php?t=477788 |
|
|
|
|
03-17-2003, 10:11 AM
|
#7 |
|
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
I just replace the pitman arm on my K25 and it came off just using my hands (after I took the bolt out) the new one went on with a little wiggling and grease no hammering). Mine has power steering if it makes a difference.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm 
|
|
|
|
|
03-17-2003, 10:19 AM
|
#8 |
|
Almost Satisfied
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,932
|
I used a regular puller with no problems.
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far." |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
