WA 250 inline carb and manifold set-up - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dave666693 · 02-21-2011, 09:09 PM

Stock 250 inline 6 intake and exhaust manifolds with Monojet carb with linkage as shown. These came off my 1968 about 2 years ago and have been stored inside. Carb probably needs cleaning. Ran just fine when pulled. $95 shipped OBO in lower 48.

Pictures were taken today, date on camera is wrong.

**70STOVEBOLT** · 11-21-2011, 07:10 PM

Dave, I know this ad is old, but do you still have this?

**zicc1835** · 11-21-2011, 10:03 PM

I just got in a 250 with the 2 piece intake /exhaust if you r still looking
Jess
QUOTE=70STOVEBOLT;5023078]Dave, I know this ad is old, but do you still have this?[/QUOTE]
Posted via Mobile Device

dave666693 · 11-22-2011, 02:17 PM

yes, I still have it.

**70STOVEBOLT** · 11-22-2011, 05:40 PM

I really only need the exhaust manifold. Mine is leaking around the shaft for the butterfly due to being worn. Are you willing to split this up, and if so, is this one worn in the same area? If you will sell just the exhaust manifold, give me a price shipped to zip code 46562.

Thanks,
Mark

dave666693 · 11-22-2011, 07:22 PM

I'm going to keep it together. Thanks any how.

**70STOVEBOLT** · 11-23-2011, 10:09 AM

Dave, thanks anyway.

68 IRON · 01-28-2012, 12:21 PM

Dave, wondering if you still have this setup. If you do....how much for pickup?

C10NEWGUY · 01-29-2012, 01:58 PM

Dave I also am interested and will do the 95 shipped. Im in Arizona 85255.

dave666693 · 01-29-2012, 03:49 PM

$75 picked up. Not sure who gets this. Mods please tell me. 2nd person PM'd me he will take it for 95 shipped.

68 IRON · 01-29-2012, 04:56 PM

PM sent

02-21-2011, 09:09 PM	#1
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	250 inline carb and manifold set-up Stock 250 inline 6 intake and exhaust manifolds with Monojet carb with linkage as shown. These came off my 1968 about 2 years ago and have been stored inside. Carb probably needs cleaning. Ran just fine when pulled. $95 shipped OBO in lower 48. Pictures were taken today, date on camera is wrong. Attached Images __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb Last edited by dave666693; 02-21-2011 at 09:14 PM.

11-21-2011, 07:10 PM	#2
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,266	Re: 250 inline carb and manifold set-up Dave, I know this ad is old, but do you still have this? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-21-2011, 10:03 PM	#3
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,152	Re: 250 inline carb and manifold set-up I just got in a 250 with the 2 piece intake /exhaust if you r still looking Jess QUOTE=70STOVEBOLT;5023078]Dave, I know this ad is old, but do you still have this?[/QUOTE] Posted via Mobile Device __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

11-22-2011, 02:17 PM	#4
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: 250 inline carb and manifold set-up yes, I still have it. __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

11-22-2011, 05:40 PM	#5
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,266	Re: 250 inline carb and manifold set-up I really only need the exhaust manifold. Mine is leaking around the shaft for the butterfly due to being worn. Are you willing to split this up, and if so, is this one worn in the same area? If you will sell just the exhaust manifold, give me a price shipped to zip code 46562. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-22-2011, 07:22 PM	#6
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: 250 inline carb and manifold set-up I'm going to keep it together. Thanks any how. __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

11-23-2011, 10:09 AM	#7
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,266	Re: 250 inline carb and manifold set-up Dave, thanks anyway. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-28-2012, 12:21 PM	#8
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 250 inline carb and manifold set-up Dave, wondering if you still have this setup. If you do....how much for pickup?

01-29-2012, 01:58 PM	#9
C10NEWGUY Registered User Join Date: Jul 2009 Location: Phoenix Posts: 60	Re: 250 inline carb and manifold set-up Dave I also am interested and will do the 95 shipped. Im in Arizona 85255. __________________ 1977 Chevy C10 RWD long bed

01-29-2012, 03:49 PM	#10
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: 250 inline carb and manifold set-up $75 picked up. Not sure who gets this. Mods please tell me. 2nd person PM'd me he will take it for 95 shipped. __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

01-29-2012, 04:56 PM	#11
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 250 inline carb and manifold set-up PM sent



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.