Question on PS pulleys - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nu2-72 · 02-22-2011, 11:37 AM

My truck is a non/AC. At some point I will add AC. It has a single groove pulley now. Do I need a double groove pulley for the PS and AC setup?

threeonthetree · 02-22-2011, 12:01 PM

you could prolly manage with one long pulley id go to a double pulley though.
look up different pulley set ups and see if there going with one or two. seems like 2 would be less of a head ache

cdowns · 02-22-2011, 12:11 PM

AC trucks that had power steering from the factory only had one groove pulleys for PS//PS was a small belt that only ran the steering pump

nu2-72 · 02-22-2011, 04:14 PM

OK. I was getting the info from catalogs. My crank pulley is a 3 groove, the water pump is a 2 groove and the PS is a single. There is currently no AC compressor so that is where the question was coming from. I do not have any factory pics so will go by what you guys state. Catalogs show a double groove on the PS. Guess I should be more clear but you read my mind. Thanks cdowns.

02-22-2011, 11:37 AM	#1
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Question on PS pulleys My truck is a non/AC. At some point I will add AC. It has a single groove pulley now. Do I need a double groove pulley for the PS and AC setup? __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

02-22-2011, 12:01 PM	#2
threeonthetree Registered User Join Date: Feb 2009 Location: Wausau, WI Posts: 975	Re: Question on PS pulleys you could prolly manage with one long pulley id go to a double pulley though. look up different pulley set ups and see if there going with one or two. seems like 2 would be less of a head ache __________________ Smoking Tires Since 1992 1969 c10 AKA SIN 1985 SSWB TRAZER (super short wheel base)

02-22-2011, 12:11 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Question on PS pulleys AC trucks that had power steering from the factory only had one groove pulleys for PS//PS was a small belt that only ran the steering pump __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

02-22-2011, 04:14 PM	#4
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Re: Question on PS pulleys OK. I was getting the info from catalogs. My crank pulley is a 3 groove, the water pump is a 2 groove and the PS is a single. There is currently no AC compressor so that is where the question was coming from. I do not have any factory pics so will go by what you guys state. Catalogs show a double groove on the PS. Guess I should be more clear but you read my mind. Thanks cdowns. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.