am i asking too much? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vasquezmrysvll · 03-03-2011, 11:04 PM

http://yubasutter.craigslist.org/pts/2245845445.html

Clutch442 · 03-03-2011, 11:11 PM

That seems very reasonable to me for a truck you can drive home.

swamp rat · 03-03-2011, 11:12 PM

Quote:

Originally Posted by vasquezmrysvll

http://yubasutter.craigslist.org/pts/2245845445.html

Are people looking at it? is there a reason there shying away from it? I don't think 800 is off base as long as its a driver unless there is so much rust around the windshield that the cab is scrap.

vasquezmrysvll · 03-03-2011, 11:17 PM

has three rust holes on the floor and rockers, i could cover the holes with 2 $1 bills. the eng/trans are tip top. new brakes, ALL a/c intact. lots of good parts.im just trying to sell to get some boss 338's

Cooper33 · 03-03-2011, 11:14 PM

only issue i see is the title work. in Texas, a owner can easily get a replacement title to a vehicle.

*72lb4x4* · 03-04-2011, 12:41 AM

Quote:

Originally Posted by Cooper33

only issue i see is the title work. in Texas, a owner can easily get a replacement title to a vehicle.

Apparently in CA, if you don't pay the registration fees every year, they add up and have to be paid when the title is transferred or the registration is finally renewed.

I may be wrong since I'm in TX and haven't lived in CA for a long time.

I had to search and find out what/where "yuba sutter sac" was. It's not what I thought at first

travlinman · 03-04-2011, 01:22 AM

Quote:

Originally Posted by 72lb4x4

Apparently in CA, if you don't pay the registration fees every year, they add up and have to be paid when the title is transferred or the registration is finally renewed.

I may be wrong since I'm in TX and haven't lived in CA for a long time.

I had to search and find out what/where "yuba sutter sac" was. It's not what I thought at first

yuo they keep adding until someone pays it either the owner to finally get it legal or the new owner to get it legal. in ca we also have a non-op (non operational) which is like 10-15 dlrs and that stops all fees until u want to re reg it.

Posi12Bolt · 03-04-2011, 03:58 AM

Quote:

Originally Posted by travlinman

... in ca we also have a non-op (non operational) which is like 10-15 dlrs and that stops all fees until u want to re reg it.

its $19/yr but the catch is the reg. has to be up to date to place it on non-op status... thats how they get ya

swamp rat · 03-04-2011, 02:35 AM

Quote:

Originally Posted by 72lb4x4

I had to search and find out what/where "yuba sutter sac" was. It's not what I thought at first

ROTF,,,, Dude i just had to spit out the food i was eating.. LOL!!

swamp rat · 03-03-2011, 11:22 PM

I wish you were closer!!!

As long as you have a release of interest from you brother and can accompany the buyer to the dmv to get the title changed then your add should state that..

Otherwide drive it up here to washington and i'll buy it

vasquezmrysvll · 03-03-2011, 11:24 PM

come down and ill cut a GOOD deal. may part it out.....

**leddzepp** · 03-03-2011, 11:40 PM

Not a bad deal at all. The problem is that there are a LOT of trucks just like that similarly priced right now.

674x4ton · 03-03-2011, 11:56 PM

You can't find deals like that here in Missouri

travlinman · 03-04-2011, 12:34 AM

wanna trade for a 68 sub ? lol

vasquezmrysvll · 03-04-2011, 12:36 AM

got pics?

travlinman · 03-04-2011, 01:24 AM

Quote:

Originally Posted by vasquezmrysvll

got pics?

ya i do somewhere but i dont think there very good. it runs and drives but has a patina look going on... has a 250 6cyl 350th
let me know if ur interested and il dig up some pics.
reg is current to 2011

vasquezmrysvll · 03-04-2011, 01:37 AM

interested

KrazyRay · 03-04-2011, 01:50 AM

Art, This truck is caught in the middle. Its a little bit too expensive to be worth while parting out and a couple of issues from being a legal driver. If you get the DMV stuff straightened out, you will have a better chance of selling it.
Just my $.02 worth.

Jacfourteen · 03-04-2011, 01:41 AM

Sounds like a decent deal. Are you just off of hwy 20 up by smartsville? The reason I ask is there was a truck that looked like that for sale for the same price awhile back, but it had different wheels on it. As far as the back fees, mine had 10 years worth and dmv said it was gonna be around $1200 to reg. it, then they told me I could sign a waiver that the truck had not been operated or towed on public roads and they knocked off all the penalties which got it down to $480. I read on here a while back that there is a clause in Ca for classic vehicles that can get you out of all the back fees, I'll try to find the post.

Edit: I just remembered the truck I was talking about was a 3/4 ton....so I guess it wasn't yours

heeroyue2002 · 03-04-2011, 01:56 AM

i spent my extra cash or id pick it up. ledzep has hit the nail on the head. there are currently many trucks like that for sale for around the same price.

Jacfourteen · 03-04-2011, 02:03 AM

Here is the info on how to beat back fees, I wish I found it before I paid almost $500 to DMV. Read posts #7 and #8. Hope this helps you out, if you can get the title in order the truck would be much more desirable.

http://67-72chevytrucks.com/vboard/s...light=dmv+fees

vasquezmrysvll · 03-04-2011, 02:16 AM

Very nice to know

treveiger · 03-04-2011, 02:18 AM

man i wish you were closer, id use it just as a beater!!!

gcburdic · 03-05-2011, 03:03 PM

Hey folks...this isn't a for sale or trade thread, the original post is asking basically if his asking price is out of order....let's stay on topic....

If the OP wants to sell or trade, I ask that he please list it in the Trucks for sale area....Thanks so much

03-03-2011, 11:04 PM	#1
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	am i asking too much? http://yubasutter.craigslist.org/pts/2245845445.html __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

03-03-2011, 11:11 PM	#2
Clutch442 Registered User Join Date: Dec 2010 Location: Ooltewah, TN Posts: 89	Re: am i asking too much? That seems very reasonable to me for a truck you can drive home.

03-03-2011, 11:17 PM	#4
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: am i asking too much? has three rust holes on the floor and rockers, i could cover the holes with 2 $1 bills. the eng/trans are tip top. new brakes, ALL a/c intact. lots of good parts.im just trying to sell to get some boss 338's __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

03-03-2011, 11:14 PM	#5
Cooper33 Registered User Join Date: Feb 2011 Location: Round Rock, TX Posts: 125	Re: am i asking too much? only issue i see is the title work. in Texas, a owner can easily get a replacement title to a vehicle. __________________ Brad 67 Chevy SWB stepside - http://67-72chevytrucks.com/vboard/s...d.php?t=449426 89 Ford Bronco 92 Suzuki Sidekick 94 Kawasaki Vulcan 750 06 Honda Aquatrax

03-03-2011, 11:22 PM	#10
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: am i asking too much? I wish you were closer!!! As long as you have a release of interest from you brother and can accompany the buyer to the dmv to get the title changed then your add should state that.. Otherwide drive it up here to washington and i'll buy it __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

03-03-2011, 11:24 PM	#11
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: am i asking too much? come down and ill cut a GOOD deal. may part it out..... __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

03-03-2011, 11:40 PM	#12
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: am i asking too much? Not a bad deal at all. The problem is that there are a LOT of trucks just like that similarly priced right now. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

03-03-2011, 11:56 PM	#13
674x4ton Registered User Join Date: Sep 2010 Location: st.joseph mo. Posts: 116	Re: am i asking too much? You can't find deals like that here in Missouri

03-04-2011, 12:34 AM	#14
travlinman Registered User Join Date: Feb 2009 Location: stockton ca. Posts: 502	Re: am i asking too much? wanna trade for a 68 sub ? lol __________________ 94 ls swap silverado 65 Pontiac 78 c30 crew cab dually (parted and gone) 82 c30 crew cab dually ( now building ) 91 r30 crew cab dually (parted and gone) 69 swb-sold 71 lab sold all in progress......__ ..........._______ \|__\__ ..........\|__(O)______(O)] ........................

03-04-2011, 12:36 AM	#15
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: am i asking too much? got pics? __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

03-04-2011, 01:37 AM	#17
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: am i asking too much? interested __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

03-04-2011, 01:50 AM	#18
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: am i asking too much? Art, This truck is caught in the middle. Its a little bit too expensive to be worth while parting out and a couple of issues from being a legal driver. If you get the DMV stuff straightened out, you will have a better chance of selling it. Just my $.02 worth.

03-04-2011, 01:41 AM	#19
Jacfourteen Big Red - Now its a SWB! Join Date: Jun 2009 Location: Oroville, Ca Posts: 1,624	Re: am i asking too much? Sounds like a decent deal. Are you just off of hwy 20 up by smartsville? The reason I ask is there was a truck that looked like that for sale for the same price awhile back, but it had different wheels on it. As far as the back fees, mine had 10 years worth and dmv said it was gonna be around $1200 to reg. it, then they told me I could sign a waiver that the truck had not been operated or towed on public roads and they knocked off all the penalties which got it down to $480. I read on here a while back that there is a clause in Ca for classic vehicles that can get you out of all the back fees, I'll try to find the post. Edit: I just remembered the truck I was talking about was a 3/4 ton....so I guess it wasn't yours __________________ 68 3/4 ton (Project)-350 Small Block, .030 over, 10:1 comp, 3998993 heads, C3BX edelbrock intake, comp cams XE268, Holley 670 SA, long tube headers, dual flow 40's, E-fan, Alum rad, currently under the knife getting shortened and bagged build thread 41 3/4 ton (wife's)-flatbed, fully restored to original 01 Tahoe LT 4WD (my daily driver)-Magnaflow Muffler, Rollin on 22's 02 Ford Mustang Convertable (Wife's Car)-Flowmaster 50, Clear corners, Intake, sittin on 18's Last edited by Jacfourteen; 03-04-2011 at 01:42 AM.

03-04-2011, 01:56 AM	#20
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: am i asking too much? i spent my extra cash or id pick it up. ledzep has hit the nail on the head. there are currently many trucks like that for sale for around the same price. __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

03-04-2011, 02:03 AM	#21
Jacfourteen Big Red - Now its a SWB! Join Date: Jun 2009 Location: Oroville, Ca Posts: 1,624	Re: am i asking too much? Here is the info on how to beat back fees, I wish I found it before I paid almost $500 to DMV. Read posts #7 and #8. Hope this helps you out, if you can get the title in order the truck would be much more desirable. http://67-72chevytrucks.com/vboard/s...light=dmv+fees __________________ 68 3/4 ton (Project)-350 Small Block, .030 over, 10:1 comp, 3998993 heads, C3BX edelbrock intake, comp cams XE268, Holley 670 SA, long tube headers, dual flow 40's, E-fan, Alum rad, currently under the knife getting shortened and bagged build thread 41 3/4 ton (wife's)-flatbed, fully restored to original 01 Tahoe LT 4WD (my daily driver)-Magnaflow Muffler, Rollin on 22's 02 Ford Mustang Convertable (Wife's Car)-Flowmaster 50, Clear corners, Intake, sittin on 18's



Register or Log In To remove these advertisements.

03-04-2011, 02:16 AM	#22
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: am i asking too much? Very nice to know __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

03-04-2011, 02:18 AM	#23
treveiger Senior Member Join Date: Jul 2010 Location: South Dakota Posts: 4,093	Re: am i asking too much? man i wish you were closer, id use it just as a beater!!! __________________ 1969 Chevy c20(Miss Hackjob)

03-05-2011, 03:03 PM	#24
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: am i asking too much? Hey folks...this isn't a for sale or trade thread, the original post is asking basically if his asking price is out of order....let's stay on topic.... If the OP wants to sell or trade, I ask that he please list it in the Trucks for sale area....Thanks so much __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

Register or Log In To remove these advertisements.