Help with front sway bar - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mallory · 03-08-2011, 10:24 PM

I got this sway bar along with some other 68 parts. Im not gonna use it on my 68 build and i'm wanting to sell it . I just want to know what all years it will fit so i dont mis represent it as something its not. Any help would be greatly appreciated.

Thanks Jimmy

**70C10Toejam** · 03-09-2011, 12:12 AM

Looks like a factory sway bar, fits up to '87.

**Clyde65** · 03-09-2011, 10:56 AM

ummm, looks just like the one I have on my truck and it is from a 72, I believe they went from the round mounts at the a-arm to the end links some where in the 73 model year I believe.

so I would say 63-72 on the fitment, 71-72 should be bolt up and 63-70 should be bolt up with a few holes drilled into the a-arm.

Mallory · 03-09-2011, 09:46 PM

Thanks

Jimmy

oldblue1968chevy · 03-09-2011, 10:51 PM

Up to 87. May want to note the diameter of the bar in the add also

03-08-2011, 10:24 PM	#1
Mallory Registered User Join Date: Dec 2010 Location: Valdosta Georgia Posts: 58	Help with front sway bar I got this sway bar along with some other 68 parts. Im not gonna use it on my 68 build and i'm wanting to sell it . I just want to know what all years it will fit so i dont mis represent it as something its not. Any help would be greatly appreciated. Thanks Jimmy Attached Images

03-09-2011, 12:12 AM	#2
70C10Toejam Hellasick Join Date: Jul 2006 Location: Death Moans, IA Posts: 876	Re: Help with front sway bar Looks like a factory sway bar, fits up to '87. __________________ I keep two MAGNUMS in my desk. One's a gun, and I keep it loaded. The other's a bottle and it keeps ME loaded. I'm Tracer Bullet. (Calvin and Hobbes) This life was a test. It was only a test. If this had been an actual life, you would have received instructions on where to go and what to do. RED meat is not bad for you...FUZZY BLUE/GREEN MEAT is bad for you!!!!!!!!!!!!! BUILT FORD TOUGH WITH CHEVY STUFF--sticker at Goodguys

03-09-2011, 10:56 AM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Help with front sway bar ummm, looks just like the one I have on my truck and it is from a 72, I believe they went from the round mounts at the a-arm to the end links some where in the 73 model year I believe. so I would say 63-72 on the fitment, 71-72 should be bolt up and 63-70 should be bolt up with a few holes drilled into the a-arm. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

03-09-2011, 09:46 PM	#4
Mallory Registered User Join Date: Dec 2010 Location: Valdosta Georgia Posts: 58	Re: Help with front sway bar Thanks Jimmy

03-09-2011, 10:51 PM	#5
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Help with front sway bar Up to 87. May want to note the diameter of the bar in the add also __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.