question, 1969 and 1970 burb... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**57NAPCO** · 03-09-2011, 12:59 AM

I have a 1970 3/4 ton 4X4 burb. I see a nice 1969 on here for sale. My question is, would the swap of my 1970 3/4 ton 4X4 running gear to a 69 1/2 ton 2X4 be straight forward? everything just bolt right on? Just wondering. Thanks

gcburdic · 03-10-2011, 05:19 PM

found this thread for ya...althouhg it looks like a truck frame swap.......http://67-72chevytrucks.com/vboard/s...d.php?t=367357

**57NAPCO** · 03-11-2011, 03:59 PM

Quote:

Originally Posted by gcburdic

found this thread for ya...althouhg it looks like a truck frame swap.......http://67-72chevytrucks.com/vboard/s...d.php?t=367357

rsavage · 03-11-2011, 05:13 PM

I haven't done it so I am really just guessing but I don't see why not. There was just a discussion the other day indicating that the 10 and 20 series frames were the same. Lots and lots of rivets to remove on both chassis - crossmembers, spring hangers,shock mounts if different, etc. High hump needed if not already in the 2wd. Don't see why it couldn't be done. Good luck and keep us posted if you do it.

vectorit · 03-11-2011, 06:20 PM

I am not sure if I understand your question completely.

Are you saying that want to swap bodies, and keep the 4x4 chassis?

Is the 2x4 chassis a coil sprung rear?

Have you done a simple check of vendor catalogs, to compare body mount kits between a 2x4 and a 4x4? (Checking to see if the number of mounts are the same between the 2x4 and 4x4)

I am leaning to the side of it shouldn't be a problem, but like you - I'd want to do a lot of research first.
Maybe work with the seller of the 2x4 on measuring the mounts, so that you can compare to your 4x4 chassis.

Longhorn Man · 03-13-2011, 03:03 PM

no, not simple at all. Suspention swap would be a pain, frame swap not so much

**57NAPCO** · 03-14-2011, 05:28 PM

Thanks for all the input! I was thinking about unbolting the body and re attaching it to the 3/4 ton frame. Prolly to much work/time.

03-09-2011, 12:59 AM	#1
57NAPCO F’B’D guy Join Date: Feb 2004 Location: Texas/Maine Posts: 2,234	question, 1969 and 1970 burb... I have a 1970 3/4 ton 4X4 burb. I see a nice 1969 on here for sale. My question is, would the swap of my 1970 3/4 ton 4X4 running gear to a 69 1/2 ton 2X4 be straight forward? everything just bolt right on? Just wondering. Thanks Last edited by 57NAPCO; 03-10-2011 at 10:29 AM.

03-10-2011, 05:19 PM	#2
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: question, 1969 and 1970 burb... found this thread for ya...althouhg it looks like a truck frame swap.......http://67-72chevytrucks.com/vboard/s...d.php?t=367357 __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present Last edited by gcburdic; 03-10-2011 at 05:20 PM.

03-11-2011, 05:13 PM	#4
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: question, 1969 and 1970 burb... I haven't done it so I am really just guessing but I don't see why not. There was just a discussion the other day indicating that the 10 and 20 series frames were the same. Lots and lots of rivets to remove on both chassis - crossmembers, spring hangers,shock mounts if different, etc. High hump needed if not already in the 2wd. Don't see why it couldn't be done. Good luck and keep us posted if you do it. __________________ 1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7

03-11-2011, 06:20 PM	#5
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: question, 1969 and 1970 burb... I am not sure if I understand your question completely. Are you saying that want to swap bodies, and keep the 4x4 chassis? Is the 2x4 chassis a coil sprung rear? Have you done a simple check of vendor catalogs, to compare body mount kits between a 2x4 and a 4x4? (Checking to see if the number of mounts are the same between the 2x4 and 4x4) I am leaning to the side of it shouldn't be a problem, but like you - I'd want to do a lot of research first. Maybe work with the seller of the 2x4 on measuring the mounts, so that you can compare to your 4x4 chassis. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU Last edited by vectorit; 03-11-2011 at 06:22 PM.

03-13-2011, 03:03 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: question, 1969 and 1970 burb... no, not simple at all. Suspention swap would be a pain, frame swap not so much

03-14-2011, 05:28 PM	#7
57NAPCO F’B’D guy Join Date: Feb 2004 Location: Texas/Maine Posts: 2,234	Re: question, 1969 and 1970 burb... Thanks for all the input! I was thinking about unbolting the body and re attaching it to the 3/4 ton frame. Prolly to much work/time.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.