Custom fuel cell - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smashingchuck · 03-10-2011, 05:30 PM

Alright guys I'm going to have a fuel cell built problem is I dont know what exactly I want. I want it mounted under the bed floor, I cant put it in the back behind the axle as my exhaust is in the way, I could put it above the frame, just not between the rails. I plan on raising the floor about 3-4". Ideas? pretty much have to put it either in front of or behind the axle between the rails on top of the frame but under the raised floor.

smashingchuck · 03-10-2011, 05:32 PM

do you guys think it matters weather or not I make it wider than the frame rails??

**Clyde65** · 03-10-2011, 05:35 PM

that might make for a wierd tank, why not move the exhaust? like dump it in front of the rear axle? then you can call Boyds and get one of their aluminum tanks.

smashingchuck · 03-10-2011, 05:43 PM

Quote:

Originally Posted by Clyde65

that might make for a wierd tank, why not move the exhaust? like dump it in front of the rear axle? then you can call Boyds and get one of their aluminum tanks.

not moving the exhaust. I do not like dumps.

**Clyde65** · 03-10-2011, 05:52 PM

OK, maybe someone has another option. if you can think it and draw something, boyds can make it too.

broey · 03-10-2011, 08:32 PM

based on this picture

I would say a cool spot might be like a 10 gallon tank on the inside of the frame between the axle and that crossmember, like opposite of the 4 link?

03-10-2011, 05:30 PM	#1
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Custom fuel cell Alright guys I'm going to have a fuel cell built problem is I dont know what exactly I want. I want it mounted under the bed floor, I cant put it in the back behind the axle as my exhaust is in the way, I could put it above the frame, just not between the rails. I plan on raising the floor about 3-4". Ideas? pretty much have to put it either in front of or behind the axle between the rails on top of the frame but under the raised floor. __________________ 78 Build Thread 4Runner Build

03-10-2011, 05:32 PM	#2
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Custom fuel cell do you guys think it matters weather or not I make it wider than the frame rails?? __________________ 78 Build Thread 4Runner Build

03-10-2011, 05:35 PM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Custom fuel cell that might make for a wierd tank, why not move the exhaust? like dump it in front of the rear axle? then you can call Boyds and get one of their aluminum tanks. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

03-10-2011, 05:52 PM	#5
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Custom fuel cell OK, maybe someone has another option. if you can think it and draw something, boyds can make it too. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 03-10-2011 at 05:53 PM.

03-10-2011, 08:32 PM	#6
broey Square Join Date: Feb 2011 Location: Phoenix Arizona Posts: 1,568	Re: Custom fuel cell based on this picture I would say a cool spot might be like a 10 gallon tank on the inside of the frame between the axle and that crossmember, like opposite of the 4 link? __________________ Squarebody Syndicate



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.