Speed Hut GPS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 03-17-2011, 08:00 PM

Well I ordered my speed o and Tach for the truck. I ordered the 4" speedo GPS and the 3 3/8 tach to go in the middle. I'll use one of my own fuel gauges and buy all new oil, volts and water. Going to buy the little 2" gauges at O-Rileys when I need them.

Anybody out there have a new Ampmeter?

I'm going to keep the dash I have now since it has all the factory goodies in it.

**mikey531** · 03-17-2011, 08:04 PM

Subscribed ! I am very interested in how it works out as I want to do the same thing this fall. Good luck !

Andy4639 · 03-17-2011, 08:27 PM

Well it will be a little while since I have to get all the parts together. I have a couple of old dashes I may do a mockup on before buying a new one.

**LockDoc** · 03-17-2011, 09:04 PM

-
Glad to see you are getting your install off the ground Andy. I am going to post a link to my install for the folks that read this thread, to give them a little more insight on the GPS speedo.

http://67-72chevytrucks.com/vboard/s...d.php?t=421745

LockDoc

Andy4639 · 03-17-2011, 09:21 PM

Quote:

Originally Posted by LockDoc

-
Glad to see you are getting your install off the ground Andy. I am going to post a link to my install for the folks that read this thread, to give them a little more insight on the GPS speedo.

http://67-72chevytrucks.com/vboard/s...d.php?t=421745

LockDoc

Thanks Doc, I'm going to need all the help I can get on this one maybe. I hope to getter done by the Goof meet (April) but I don't know! I was going with all Speed Hut gauges but after seeing all the ones O-Riley has I figured they would be just as easy to use and don't have to worry about ordering them. All of them should be a basic bolt in and wire up. The oil should be nothing but hooking it back up to the line. Volt meter is just moving it into the dash instead of under it. Leave the ampmeter and water alone.I may need a ampmeter and water gauge so I don't have to rob them out of the orignal dash.

**LockDoc** · 03-17-2011, 09:38 PM

Quote:

Originally Posted by Andy4639

Thanks Doc, I'm going to need all the help I can get on this one maybe. I hope to getter done by the Goof meet (April) but I don't know! I was going with all Speed Hut gauges but after seeing all the ones O-Riley has I figured they would be just as easy to use and don't have to worry about ordering them. All of them should be a basic bolt in and wire up. The oil should be nothing but hooking it back up to the line. Volt meter is just moving it into the dash instead of under it. Leave the ampmeter and water alone.I may need a ampmeter and water gauge so I don't have to rob them out of the orignal dash.

I have some extra gauges. If you can't find any down your way let me know.

LockDoc

Andy4639 · 04-01-2011, 06:58 PM

Got to have a circuit board for a non tach dash along with a lens for the same. I'll have to cutout the tach and speedo area so the speedhut stuff will work. Then decide on the rest after I get that done. Anybody have something they want to get rid of?

Andy4639 · 07-27-2011, 12:45 PM

I know this thread is a little behind. Just haven't had time for the install. Just ordered the new dash, lens and printed circuit. I hope to work on it next week when my parts get here.

Going with all mechanical gauges except for the stock gas guage. Everything else will be mechanical!

Andy4639 · 07-30-2011, 07:45 PM

Well I guess I'm putting in another order to SpeedHut for the 2 1/16" water, oil, volts and air/fuel mixture guages. I was going with just generic gauges but have changed my mind.

**LockDoc** · 07-30-2011, 10:29 PM

-
Might as well get them all alike...

.. I think I am going to get a full set for the '70 when I get that far.

LockDoc

Andy4639 · 07-31-2011, 05:20 AM

Yea,
I been playing with it some the past few evenings after work. I just don't think the mixing of the gauges would look to good. I'm also going to order the wiring harness for 8 gauges to make all the connection cleaner and simpler.
I'm going to call tomorrow and order them along with asking if I can get a 3" are 4"gas gauge to match.

I got the new dash and printed circuit and lens the other day. So it's just a matter of getting the gauges all now. I have a couple of ?'s though about the fuel / air gauge that I hope they can answer to.

Andy4639 · 08-01-2011, 09:09 PM

I ordered the 2 1/16" volt, oil, fuel/air, gas and water guages today got the wiring harness to connect all the lights of them together to make it one simple hookup and the Gas is 3 3/8" to go back in the regular spot!
I hope to work on it next week after returning home from the beach.

Mine is white numbers that glow red at night. Muscle! Red pointer!

http://www.speedhut.com/custom_gauge...number-820.htm

**LockDoc** · 08-01-2011, 09:44 PM

-
That should work. keep us posted on the install...

LockDoc

stealthy '69 · 08-19-2011, 04:35 PM

Good luck with the install. Keep us posted through out the build. Take lots of pics so they can make this a FAQ.

Plus those gauges look very cool. I can't wait to see them finished up.

Andy4639 · 08-19-2011, 06:12 PM

Well I hope I can pull this off. I'm a little worried about the wiring but I hope it will be simple enough after I get everything layed out and start messing with it.
I'm going to do a full pictorial as I go along so I will have referances for if I ever need to work on it are put it back to orignal

stealthy '69 · 08-19-2011, 06:18 PM

Plus the pics will help out all the other *dummies* that'll be doing gauges in the future.

*dummies* = ME

Andy4639 · 08-19-2011, 06:21 PM

Yea that to! I just looked at the tracking # it's suppose to be here by Wednesday afternoon!

stealthy '69 · 08-19-2011, 06:27 PM

Better then next Wednesday! I can't wait to see it done. And they're not even my gauges.

Andy4639 · 08-19-2011, 06:52 PM

Once I get the guages I can get the wiring done. I shouldn't have any major problems with it I hope. It all seems like it just a matter of finding the right wires out of the factory plug and using them. I have to figure out a high beam light, brake and alternator lights to I guess. When I crank it up. Then again I may just do without them!

Andy4639 · 08-25-2011, 11:42 PM

Long story short version!

Just got back home after 2 long days in Garden City. Irene is suppose to bypass our place so it was a long round trip pulling the car trailer for nothing!!!!

OK now for the good news the SpeedHut guages showed up while I was gone so I hope to start on the new dash over the weekend and first of next week since I'm off until Wednesday of next week. I hope to get the new dash wired and maybe installed. Pictures will be coming soon.

**jocko** · 01-13-2013, 07:29 PM

Alrighty, I have a dumb question - but because I love the idea of these things, I have to ask - will you not know your speed in a parking garage or tunnel when you don't have sv reception?

Andy4639 · 01-13-2013, 08:14 PM

Quote:

Originally Posted by jocko

Alrighty, I have a dumb question - but because I love the idea of these things, I have to ask - will you not know your speed in a parking garage or tunnel when you don't have sv reception?

Good question,
sorry I don't have a good answer for you on it though! I haven't been through any tunnels are parking garages. I know with my truck in my garage it picks up with the door open. with the front of the truck facing the door. Never have thought about it park the other way because I back into the garage.

**jocko** · 01-13-2013, 08:21 PM

Hmm, interesting. Knowing my luck, I'd get a ticket before I picked up enough satellites pulling out of my garage since I'm a nose-in'er. These things are a great idea though - sure is nice to know your speedo and odo are accurate regardless of rear end/trans mods, etc.

Andy4639 · 01-13-2013, 08:25 PM

Yes it is and they do much more for you.

They give 1/4 mile speed, 1/8 mile speed elevation reading, top speed, direction as in North, south, east and west. Plus a trip reset!
It's one of the best mods I've done to my truck.
Plus you can design your own faces for the gauges to.

03-17-2011, 08:00 PM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Speed Hut GPS Well I ordered my speed o and Tach for the truck. I ordered the 4" speedo GPS and the 3 3/8 tach to go in the middle. I'll use one of my own fuel gauges and buy all new oil, volts and water. Going to buy the little 2" gauges at O-Rileys when I need them. Anybody out there have a new Ampmeter? I'm going to keep the dash I have now since it has all the factory goodies in it. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-17-2011, 08:04 PM	#2
mikey531 Senior Member Join Date: Jul 2009 Location: Exeter, NH Posts: 795	Re: Speed Hut GPS Subscribed ! I am very interested in how it works out as I want to do the same thing this fall. Good luck !

03-17-2011, 08:27 PM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Speed Hut GPS Well it will be a little while since I have to get all the parts together. I have a couple of old dashes I may do a mockup on before buying a new one. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-17-2011, 09:04 PM	#4
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,825	Re: Speed Hut GPS - Glad to see you are getting your install off the ground Andy. I am going to post a link to my install for the folks that read this thread, to give them a little more insight on the GPS speedo. http://67-72chevytrucks.com/vboard/s...d.php?t=421745 LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

04-01-2011, 06:58 PM	#7
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Speed Hut GPS Got to have a circuit board for a non tach dash along with a lens for the same. I'll have to cutout the tach and speedo area so the speedhut stuff will work. Then decide on the rest after I get that done. Anybody have something they want to get rid of? __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-27-2011, 12:45 PM	#8
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Speed Hut GPS I know this thread is a little behind. Just haven't had time for the install. Just ordered the new dash, lens and printed circuit. I hope to work on it next week when my parts get here. Going with all mechanical gauges except for the stock gas guage. Everything else will be mechanical! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-30-2011, 07:45 PM	#9
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Speed Hut GPS Well I guess I'm putting in another order to SpeedHut for the 2 1/16" water, oil, volts and air/fuel mixture guages. I was going with just generic gauges but have changed my mind. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-30-2011, 10:29 PM	#10
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,825	Re: Speed Hut GPS - Might as well get them all alike..... I think I am going to get a full set for the '70 when I get that far. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

07-31-2011, 05:20 AM	#11
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Speed Hut GPS Yea, I been playing with it some the past few evenings after work. I just don't think the mixing of the gauges would look to good. I'm also going to order the wiring harness for 8 gauges to make all the connection cleaner and simpler. I'm going to call tomorrow and order them along with asking if I can get a 3" are 4"gas gauge to match. I got the new dash and printed circuit and lens the other day. So it's just a matter of getting the gauges all now. I have a couple of ?'s though about the fuel / air gauge that I hope they can answer to. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-01-2011, 09:09 PM	#12
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Speed Hut GPS I ordered the 2 1/16" volt, oil, fuel/air, gas and water guages today got the wiring harness to connect all the lights of them together to make it one simple hookup and the Gas is 3 3/8" to go back in the regular spot! I hope to work on it next week after returning home from the beach. Mine is white numbers that glow red at night. Muscle! Red pointer! http://www.speedhut.com/custom_gauge...number-820.htm __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-01-2011, 09:44 PM	#13
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,825	Re: Speed Hut GPS - That should work. keep us posted on the install... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

08-19-2011, 06:12 PM	#15
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Speed Hut GPS Well I hope I can pull this off. I'm a little worried about the wiring but I hope it will be simple enough after I get everything layed out and start messing with it. I'm going to do a full pictorial as I go along so I will have referances for if I ever need to work on it are put it back to orignal __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-19-2011, 06:21 PM	#17
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Speed Hut GPS Yea that to! I just looked at the tracking # it's suppose to be here by Wednesday afternoon! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 08-19-2011 at 06:48 PM.

08-19-2011, 06:52 PM	#19
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Speed Hut GPS Once I get the guages I can get the wiring done. I shouldn't have any major problems with it I hope. It all seems like it just a matter of finding the right wires out of the factory plug and using them. I have to figure out a high beam light, brake and alternator lights to I guess. When I crank it up. Then again I may just do without them! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-25-2011, 11:42 PM	#20
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Speed Hut GPS Long story short version! Just got back home after 2 long days in Garden City. Irene is suppose to bypass our place so it was a long round trip pulling the car trailer for nothing!!!! OK now for the good news the SpeedHut guages showed up while I was gone so I hope to start on the new dash over the weekend and first of next week since I'm off until Wednesday of next week. I hope to get the new dash wired and maybe installed. Pictures will be coming soon. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

01-13-2013, 07:29 PM	#21
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: Speed Hut GPS Alrighty, I have a dumb question - but because I love the idea of these things, I have to ask - will you not know your speed in a parking garage or tunnel when you don't have sv reception?

01-13-2013, 08:21 PM	#23
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: Speed Hut GPS Hmm, interesting. Knowing my luck, I'd get a ticket before I picked up enough satellites pulling out of my garage since I'm a nose-in'er. These things are a great idea though - sure is nice to know your speedo and odo are accurate regardless of rear end/trans mods, etc.

01-13-2013, 08:25 PM	#24
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Speed Hut GPS Yes it is and they do much more for you. They give 1/4 mile speed, 1/8 mile speed elevation reading, top speed, direction as in North, south, east and west. Plus a trip reset! It's one of the best mods I've done to my truck. Plus you can design your own faces for the gauges to. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

Register or Log In To remove these advertisements.