ME WTB 69 1 ton rear spring perches - The 1947 - Present Chevrolet & GMC Truck Message Board Network

no moa · 03-18-2011, 07:52 AM

I was using the wrecker this morning, and i climbed under it and noticed the rear spring perches have rust holes in them, so i need to replace them.

Also found a crossmember thats bad, but thats another day.

Cheap would be great, free would be better. lol. I'd like the non swiss cheese versions also.

Thanks
Glen

**StingRay** · 03-18-2011, 02:33 PM

You can make spring perches easy enough. Hole saw a half moon through a piece of rectangular tubing or some channel. I'm keeping the set that's on the HO72 out back. I will be scrapping the frame though. Some of it's rusty some of it not so bad. Which cross member do you need. If I have a good one I'd save it for ya. Shipping would be the killer but I don't need anything for it either.

no moa · 03-21-2011, 08:57 AM

Thanks stingray, i was some factory perches,
I'm not sure which crossmember it is yet, I'll get pics of it, I can just see the holes through the body. But haven't layed in the mud yet. I'll let you know.
Thanks
Glen
TTT for anyone with stock rear frame perches.
Posted via Mobile Device

**StingRay** · 03-21-2011, 09:46 AM

My one ton only has about 60K original and the factory spring perches were not all that hot. Not rotten through by any means but the mating surfaces were pretty eroded. If you do find some see if they can sacrifice the housing and leave you a good amount of material to work with. I'd consider having them milled at the mating surface too to so that everything sits nice and true. If I had to replace mine I'd just build my own. Does yours have the spacers between the housing and the sping? Factory spacers have a bit of wedge built into them for pinion angle and can be prone to cracking. If you have these take them and sand blast them good. I welded mine up to repair them. I also spent a pile of time with a file and grinder truing the perches and spacers to eachother because of corrosion.

no moa · 03-21-2011, 09:55 AM

I didn't look that close, i just saw the holes in them. I'm going to try to get some pics later. And i'll check for the spacers.

**67cheby** · 03-21-2011, 09:58 AM

i just posted a set in the for sale section

no moa · 03-21-2011, 10:16 AM

Quote:

Originally Posted by 67cheby

i just posted a set in the for sale section

Leaf spring perches?

**67cheby** · 03-21-2011, 10:19 AM

no sorry they were coil spring , my bad

no moa · 03-21-2011, 10:46 AM

Ok, thanks for the heads up though.
Posted via Mobile Device

OldCreek · 03-22-2011, 01:12 PM

I might have a pair. Do these push the spring mounting width outward? I think what I have is 73+ and probably 3/4ton. Got a picture? I've gotta go to the barn to find them...may take a while.

no moa · 03-22-2011, 01:44 PM

No pictures yet, it snowed like crazy here so I can't get to them. I'll post them up when I do.
Posted via Mobile Device

no moa · 03-25-2011, 08:31 AM

Here are some pics, they are pretty bad now that i cleaned them out of crap.

THe last 2 are the rusted out crossmember.

no moa · 05-23-2011, 08:01 AM

Ttt

no moa · 06-08-2011, 10:39 AM

TTT again.

**CUSTOM/10** · 06-08-2011, 12:31 PM

I may have a set off a 72 Blazer if there the same. Blazer came from Ca. so I believe there in nice shape. Were abouts in Maine are you ?

Gary

no moa · 06-08-2011, 01:04 PM

Quote:

Originally Posted by CUSTOM/10

I may have a set off a 72 Blazer if there the same. Blazer came from Ca. so I believe there in nice shape. Were abouts in Maine are you ?

Gary

I'm in Bath.

I don't know if they are the same or not. I think the 1 tons are more heavy duty. I'll take some measurements when i can.

Thanks Gary,
Glen

no moa · 09-14-2011, 06:51 AM

TTT still need a set.
Posted via Mobile Device

no moa · 09-21-2011, 03:00 PM

TTT
Posted via Mobile Device

no moa · 10-20-2011, 12:41 PM

ttt

**DeadheadNM** · 10-20-2011, 02:14 PM

I have a new set of spring perches for a Dana 60 that I do not need as I'm sticking with my Eaton. Do you need Eaton or Dana perches?

no moa · 10-20-2011, 03:53 PM

I have no idea what is in the truck. I'll do some checking but I believe it to be factory.
Posted via Mobile Device

03-18-2011, 07:52 AM	#1
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	WTB 69 1 ton rear spring perches I was using the wrecker this morning, and i climbed under it and noticed the rear spring perches have rust holes in them, so i need to replace them. Also found a crossmember thats bad, but thats another day. Cheap would be great, free would be better. lol. I'd like the non swiss cheese versions also. Thanks Glen __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd. Last edited by no moa; 03-18-2011 at 07:53 AM.

03-18-2011, 02:33 PM	#2
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	Re: WTB 69 1 ton rear spring perches You can make spring perches easy enough. Hole saw a half moon through a piece of rectangular tubing or some channel. I'm keeping the set that's on the HO72 out back. I will be scrapping the frame though. Some of it's rusty some of it not so bad. Which cross member do you need. If I have a good one I'd save it for ya. Shipping would be the killer but I don't need anything for it either. __________________ Saskatoon, Saskatchewan Canada

03-21-2011, 08:57 AM	#3
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: WTB 69 1 ton rear spring perches Thanks stingray, i was some factory perches, I'm not sure which crossmember it is yet, I'll get pics of it, I can just see the holes through the body. But haven't layed in the mud yet. I'll let you know. Thanks Glen TTT for anyone with stock rear frame perches. Posted via Mobile Device __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

03-21-2011, 09:46 AM	#4
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	Re: WTB 69 1 ton rear spring perches My one ton only has about 60K original and the factory spring perches were not all that hot. Not rotten through by any means but the mating surfaces were pretty eroded. If you do find some see if they can sacrifice the housing and leave you a good amount of material to work with. I'd consider having them milled at the mating surface too to so that everything sits nice and true. If I had to replace mine I'd just build my own. Does yours have the spacers between the housing and the sping? Factory spacers have a bit of wedge built into them for pinion angle and can be prone to cracking. If you have these take them and sand blast them good. I welded mine up to repair them. I also spent a pile of time with a file and grinder truing the perches and spacers to eachother because of corrosion. __________________ Saskatoon, Saskatchewan Canada Last edited by StingRay; 03-21-2011 at 09:47 AM.

03-21-2011, 09:55 AM	#5
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: WTB 69 1 ton rear spring perches I didn't look that close, i just saw the holes in them. I'm going to try to get some pics later. And i'll check for the spacers. __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

03-21-2011, 09:58 AM	#6
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB 69 1 ton rear spring perches i just posted a set in the for sale section __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-21-2011, 10:19 AM	#8
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: WTB 69 1 ton rear spring perches no sorry they were coil spring , my bad __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-21-2011, 10:46 AM	#9
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: WTB 69 1 ton rear spring perches Ok, thanks for the heads up though. Posted via Mobile Device __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

03-22-2011, 01:12 PM	#10
OldCreek Registered User Join Date: Jan 2007 Location: Central Coast California Posts: 1,026	Re: WTB 69 1 ton rear spring perches I might have a pair. Do these push the spring mounting width outward? I think what I have is 73+ and probably 3/4ton. Got a picture? I've gotta go to the barn to find them...may take a while. __________________ 1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold 1972 C10 5.3L/4L60E 12bolt 5Lug - Sold 1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!! 1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold 1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold 1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold) 2003 K2500HD 8.1/Allison1000/NP263

03-22-2011, 01:44 PM	#11
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: WTB 69 1 ton rear spring perches No pictures yet, it snowed like crazy here so I can't get to them. I'll post them up when I do. Posted via Mobile Device __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

03-25-2011, 08:31 AM	#12
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: WTB 69 1 ton rear spring perches Here are some pics, they are pretty bad now that i cleaned them out of crap. THe last 2 are the rusted out crossmember. Attached Images __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

05-23-2011, 08:01 AM	#13
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: WTB 69 1 ton rear spring perches Ttt __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

06-08-2011, 10:39 AM	#14
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: WTB 69 1 ton rear spring perches TTT again. __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

06-08-2011, 12:31 PM	#15
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,855	Re: WTB 69 1 ton rear spring perches I may have a set off a 72 Blazer if there the same. Blazer came from Ca. so I believe there in nice shape. Were abouts in Maine are you ? Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

09-14-2011, 06:51 AM	#17
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: WTB 69 1 ton rear spring perches TTT still need a set. Posted via Mobile Device __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.



Register or Log In To remove these advertisements.

09-21-2011, 03:00 PM	#18
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: WTB 69 1 ton rear spring perches TTT Posted via Mobile Device __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

10-20-2011, 12:41 PM	#19
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: WTB 69 1 ton rear spring perches ttt __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

10-20-2011, 02:14 PM	#20
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: WTB 69 1 ton rear spring perches I have a new set of spring perches for a Dana 60 that I do not need as I'm sticking with my Eaton. Do you need Eaton or Dana perches? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

10-20-2011, 03:53 PM	#21
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: WTB 69 1 ton rear spring perches I have no idea what is in the truck. I'll do some checking but I believe it to be factory. Posted via Mobile Device __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

Register or Log In To remove these advertisements.