is it just me...? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cstm68 · 03-21-2011, 11:43 PM

or does this bug the heck outa other people..

im talking about when shaving the firewall not removing the small raised part ware the top of the heater bolted to

no affence to people who have left it im just wondering if it bugs anyone eles

heres a pic of what i mean, and a pic of my firewall with it removed

Beat68CST · 03-21-2011, 11:49 PM

Adds character!

CTENTA1 · 03-22-2011, 05:38 PM

Quote:

Originally Posted by Beat68CST

Adds character!

Agree!

ChevLoRay · 03-22-2011, 05:55 PM

I like symmetry, too. However, I wear glasses and one ear is farther back than the other by a 1/4-inch. You can't look and see it, but I know.

Thanks for giving me something else to obsess about when I look at these trucks.

*GMC4wheels71* · 03-22-2011, 06:01 PM

Quote:

Originally Posted by crazy longhorn

Thats a "Chevy bump" (gotta have it)

Like my old grandad told me about the bump on the back of the dogs head...."Boy, thats a knowledge bump....the bigger the bump, the dumber that damn dog is

). The old man had a way with (few words), but its a small bump on the Chev, so my bet is its all good

crazyL

My grandpa used to say the same thing. He said if you get a stick and level that knot out your dog will be smarter.

crazy longhorn · 03-22-2011, 07:28 PM

Quote:

Originally Posted by GMC4wheels71

My grandpa used to say the same thing. He said if you get a stick and level that knot out your dog will be smarter.

I still get a chuckle, when I remember old gramps talkin

He didnt have a lot to say, said his pc....then walked away & let the kid figure it out

I could knock that dumb bump off my old Chev....but I doubt that it would make it go any faster? crazyL

bucketObolts · 03-21-2011, 11:56 PM

Hate to say it, but I left mine, To tell you the truth, never even thought twice about it, but now that I see your firewall, my little heater hump is buggin me. i might haveto address that little hump when i do my 396 conversion

cstm68 · 03-22-2011, 12:05 AM

it just bugs me when stuff doesnt match side to side, even my booster and master bug me that its on one side and not the other, hahaha

mcmlxix · 03-22-2011, 02:31 AM

Quote:

Originally Posted by cstm68

it just bugs me when stuff doesnt match side to side, even my booster and master bug me that its on one side and not the other, hahaha

Build a nice battery box and mount it to the firewall opposite the brake booster ...

Beat68CST · 03-22-2011, 02:51 AM

Quote:

Originally Posted by mcmlxix

Build a nice battery box and mount it to the firewall opposite the brake booster ...

They wouldn't be the same general shape and size

^that's what his response will be similar too :P

KIDDING! hahaha

**truckster** · 03-22-2011, 07:41 PM

Quote:

Originally Posted by cstm68

it just bugs me when stuff doesnt match side to side, even my booster and master bug me that its on one side and not the other, hahaha

Dual brake systems and dual steering wheels- my wife would love that!

STOCKISH · 03-22-2011, 10:37 PM

I like symetry as well but I am a big fan of a little hump here and there!

bucketObolts · 03-22-2011, 12:17 AM

naa, i hear you. The passenger side is just plain firewall so now i notice it right away. Im putting it on my never ending to do list. but luckily my 68's far from final paint so I can still hack into it. Thanks for the idea cstm

ETsC10 · 03-22-2011, 12:26 AM

To me, it's not only the symmetry from side to side but having that 'bump' there just adds
one more noise that takes away from your engine being the focal point.

Same as it's always bugged me to see the dash panel differ from the glove box door..same concept.

BTW--Nice job on the shave and very nice engine bay!

bucketObolts · 03-22-2011, 12:34 AM

I'm only running a 305 at the moment soo I'm not too worried about it not being the focal point lol. But yes you're definitely right.
Posted via Mobile Device

treveiger · 03-22-2011, 12:33 AM

How hard is it to shave the firewall? Both look good to me!

OARNGESI · 03-22-2011, 12:41 AM

That bump don't hurt anything the thing I always thought is you shave the fire wall the break booster should be shaved too the other thing that always stick out to me is when people shave their doors and leave the gas cap on theses bodies
Posted via Mobile Device

Blue72slab · 03-22-2011, 12:44 AM

LOL, no offense but you might have a little OCD?

It's cool though, it makes life interesting!

crazy longhorn · 03-22-2011, 01:05 AM

Thats a "Chevy bump" (gotta have it)

Like my old grandad told me about the bump on the back of the dogs head...."Boy, thats a knowledge bump....the bigger the bump, the dumber that damn dog is

). The old man had a way with (few words), but its a small bump on the Chev, so my bet is its all good

crazyL

cstm68 · 03-22-2011, 01:07 AM

Quote:

Originally Posted by Blue72slab

LOL, no offense but you might have a little OCD?

It's cool though, it makes life interesting!

hahaha soo true, but to me its the small things that really make a custom build POP! a little OCD could help build a bad a$$ truck, hahaha

*stich626* · 03-22-2011, 12:12 PM

just add a smiley face with a fo man chu to that spot..

Beelzeburb · 03-22-2011, 02:33 PM

The way I see it, if that little bump bugged me that much, then I'd have a whole bunch of other small bumps, protrusions and asymetry to worry about. After filling the blower motor hole then I'd have to extend the line on the firewall all the way out so that it better matched the driver side. Then I'd have to remove the protrusions (which are also asymetrical from one side to the other) altogether and make the whole firewall surface flat. Well, might as well make the engine clearance hump symmetrical too. In short, that one little bump would be too much extra metal work to remove.

DT1 · 03-22-2011, 03:03 PM

I like symmetry also. Can you send me your hump so I can put it on the other side?

Bishops Trucks · 03-22-2011, 03:45 PM

Never even crossed my mind. Sorry, it doesn't bother me.

RaceAGMC · 03-22-2011, 06:44 PM

Yes, it bugs me a lil as well, if i ever do shave my firewall i want the whole thing to be smooth on both sides. I'd like to get rid of the hump in the middle as well. Something like this...I stole this from a board member, hope they don't mind. It's a beautiful example of how a shaved firewall should look.

03-21-2011, 11:43 PM	#1
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	is it just me...? or does this bug the heck outa other people.. im talking about when shaving the firewall not removing the small raised part ware the top of the heater bolted to no affence to people who have left it im just wondering if it bugs anyone eles heres a pic of what i mean, and a pic of my firewall with it removed Attached Images __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB Last edited by cstm68; 03-21-2011 at 11:45 PM.

03-21-2011, 11:49 PM	#2
Beat68CST Registered User Join Date: Oct 2010 Location: Buckeye Arizona Posts: 470	Re: is it just me...? Adds character!

03-22-2011, 05:55 PM	#4
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: is it just me...? I like symmetry, too. However, I wear glasses and one ear is farther back than the other by a 1/4-inch. You can't look and see it, but I know. Thanks for giving me something else to obsess about when I look at these trucks. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

03-21-2011, 11:56 PM	#7
bucketObolts Registered User Join Date: Mar 2011 Location: Pequannock NJ Posts: 259	Re: is it just me...? Hate to say it, but I left mine, To tell you the truth, never even thought twice about it, but now that I see your firewall, my little heater hump is buggin me. i might haveto address that little hump when i do my 396 conversion

03-22-2011, 12:05 AM	#8
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: is it just me...? it just bugs me when stuff doesnt match side to side, even my booster and master bug me that its on one side and not the other, hahaha __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

03-22-2011, 10:37 PM	#12
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: is it just me...? I like symetry as well but I am a big fan of a little hump here and there! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-22-2011, 12:17 AM	#13
bucketObolts Registered User Join Date: Mar 2011 Location: Pequannock NJ Posts: 259	Re: is it just me...? naa, i hear you. The passenger side is just plain firewall so now i notice it right away. Im putting it on my never ending to do list. but luckily my 68's far from final paint so I can still hack into it. Thanks for the idea cstm

03-22-2011, 12:26 AM	#14
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: is it just me...? To me, it's not only the symmetry from side to side but having that 'bump' there just adds one more noise that takes away from your engine being the focal point. Same as it's always bugged me to see the dash panel differ from the glove box door..same concept. BTW--Nice job on the shave and very nice engine bay!

03-22-2011, 12:34 AM	#15
bucketObolts Registered User Join Date: Mar 2011 Location: Pequannock NJ Posts: 259	Re: is it just me...? I'm only running a 305 at the moment soo I'm not too worried about it not being the focal point lol. But yes you're definitely right. Posted via Mobile Device

03-22-2011, 12:33 AM	#16
treveiger Senior Member Join Date: Jul 2010 Location: South Dakota Posts: 4,093	Re: is it just me...? How hard is it to shave the firewall? Both look good to me! __________________ 1969 Chevy c20(Miss Hackjob)

03-22-2011, 12:41 AM	#17
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: is it just me...? That bump don't hurt anything the thing I always thought is you shave the fire wall the break booster should be shaved too the other thing that always stick out to me is when people shave their doors and leave the gas cap on theses bodies Posted via Mobile Device __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

03-22-2011, 12:44 AM	#18
Blue72slab Registered User Join Date: Aug 2009 Location: La Quinta, CA Posts: 72	Re: is it just me...? LOL, no offense but you might have a little OCD? It's cool though, it makes life interesting! __________________ Larry 1972 Chevy C20 Custom Camper 1968 Chevy Camaro RS 1980 GMC K5 Sierra Classic

03-22-2011, 01:05 AM	#19
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Re: is it just me...? Thats a "Chevy bump" (gotta have it) Like my old grandad told me about the bump on the back of the dogs head...."Boy, thats a knowledge bump....the bigger the bump, the dumber that damn dog is). The old man had a way with (few words), but its a small bump on the Chev, so my bet is its all good crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

03-22-2011, 12:12 PM	#21
stich626 Account Suspended Join Date: Sep 2010 Location: hingham ma Posts: 1,721	Re: is it just me...? just add a smiley face with a fo man chu to that spot..

03-22-2011, 02:33 PM	#22
Beelzeburb Devil's in the Details Join Date: Sep 2008 Location: Southern Utah Posts: 353	Re: is it just me...? The way I see it, if that little bump bugged me that much, then I'd have a whole bunch of other small bumps, protrusions and asymetry to worry about. After filling the blower motor hole then I'd have to extend the line on the firewall all the way out so that it better matched the driver side. Then I'd have to remove the protrusions (which are also asymetrical from one side to the other) altogether and make the whole firewall surface flat. Well, might as well make the engine clearance hump symmetrical too. In short, that one little bump would be too much extra metal work to remove. __________________ '70 K10 Suburban - TBI 454, 4L80E, NP241C, Dana 60 & 44 - The 10+ Year Project Thread Datsun 240Z, 510 2 door and an old Honda motorcycle Last edited by Beelzeburb; 03-22-2011 at 02:34 PM.



Register or Log In To remove these advertisements.

03-22-2011, 03:03 PM	#23
DT1 Registered User Join Date: Oct 2009 Location: Gardnerville Nv No Mo Cali!! Posts: 869	Re: is it just me...? I like symmetry also. Can you send me your hump so I can put it on the other side?

03-22-2011, 03:45 PM	#24
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,730	Re: is it just me...? Never even crossed my mind. Sorry, it doesn't bother me. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

03-22-2011, 06:44 PM	#25
RaceAGMC Registered User Join Date: Jul 2007 Location: Charlotte, NC Posts: 350	Re: is it just me...? Yes, it bugs me a lil as well, if i ever do shave my firewall i want the whole thing to be smooth on both sides. I'd like to get rid of the hump in the middle as well. Something like this...I stole this from a board member, hope they don't mind. It's a beautiful example of how a shaved firewall should look. __________________ 70 CST, 6.0/ 4L80E in the works. Custom harness by 68 Short Step

Register or Log In To remove these advertisements.