MT complete clutch setup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ironhill · 03-22-2011, 06:37 PM

Just picked up a 68 that I'm parting out. First thing I don't need is the clutch setup. Complete - pedals, linkage, z-bar, pivot ball for engine block, bracket off the frame for the z-bar, all adjustment linkages to the throwout bearing pivot arm. $100 for complete setup. Also nice tranny hump $40

I'll be pulling the parts off this weekend if the weather holds

mahanian · 03-22-2011, 10:09 PM

I'd like to be first in line for the tranny hump. Could you post some pictures once you get it pulled? Any rust or dents?

ironhill · 03-23-2011, 06:23 PM

mahanian first in line for the tranny hump. I'll get you some pics posted looks like at the latest I'll be doing some disassembly this weekend if not sooner weather depending. It doesn't appear to have any dents or rust.

47thriftmaster · 03-23-2011, 07:17 PM

How much to ship it all to 28327?

Patsfan34 · 03-23-2011, 07:38 PM

Quote:

Originally Posted by ironhill

Just picked up a 68 that I'm parting out. First thing I don't need is the clutch setup. Complete - pedals, linkage, z-bar, pivot ball for engine block, bracket off the frame for the z-bar, all adjustment linkages to the throwout bearing pivot arm. $100 for complete setup. Also nice tranny hump $40

I'll be pulling the parts off this weekend if the weather holds

Could you take pics of the entire setup before you disassemble and remove it? I'd greatly appreciate it! Thanks, Neil

ironhill · 03-30-2011, 07:38 PM

Sorry it took so long for pics, it was still snow/raining here all weekend.

mahanian · 03-30-2011, 08:24 PM

Thanks for the picture of the hump, could you take one of the right side and bottom as well? How much shipped to 85224?

tow guys · 03-30-2011, 08:34 PM

If you plan to part the entire truck, I'd be interested in the passenger fender shipped to zip 08721 when you get to it. No rush.
Thanks,
Tony
Posted via Mobile Device

ironhill · 03-30-2011, 08:39 PM

[QUOTE=tow guys;4589553]If you plan to part the entire truck, I'd be interested in the passenger fender shipped to zip 08721 when you get to it. No rush.
Thanks,
Tony

Sorry, no fenders on the truck. It had a little fire and about all thats usable is the suspension and chassis parts. Thanks for checking

tow guys · 03-30-2011, 08:54 PM

Thanks anyway. Good luck with the rest of the part out
Posted via Mobile Device

RCbowtie69 · 04-01-2011, 02:41 PM

Hey Aaron,just want to say i've have not got my AT brake pedal,have you sent it out?

ironhill · 04-01-2011, 03:36 PM

Just checked with my wife to make sure its not still in her car. Said she dropped it off last Thursday. When I get home this evening ill get the tracking number and send it to you.
Posted via Mobile Device

Mt Man Chad · 04-01-2011, 06:50 PM

Hummm

mahanian · 04-01-2011, 07:06 PM

I still want the tranny hump if you could post a picture of the right side and bottom and a shipping quote to zip code 85224 would be great

RCbowtie69 · 04-01-2011, 09:29 PM

Thanks,Randy

ironhill · 04-01-2011, 09:49 PM

mahanian - sorry for the wait, the truck is about 30 miles away from me right now and my trailer is still barried in a snow drift. I will be going back out there tomorrow and will bring the hump home and get you more pics and a shipping cost.

Randy - pm sent with tracking number

Chad - Let me know whats up with your post, tried to pm but your mailbox is full.

Patsfan34 · 04-01-2011, 11:17 PM

Thanks for the pics.

ironhill · 04-02-2011, 09:02 PM

More pics of the tranny hump

mahanian looks like it would be roughly $20 shipping on that

Dano69c10 · 04-03-2011, 08:57 AM

If the manual transmission cross-member is available, I'll take it!
If it is a true small block V-8 crossmember. (I don't need an L-6 one.)
I'll also take the pivot ball/bracket for engine block.
Dano

ironhill · 04-03-2011, 11:32 AM

Quote:

Originally Posted by Dano69c10

If the manual transmission cross-member is available, I'll take it!
If it is a true small block V-8 crossmember. (I don't need an L-6 one.)
I'll also take the pivot ball/bracket for engine block.
Dano

Hey Dano - it is a true v-8 and it still has the transmission cross-member in it. It may be a bit before I can get it out of the truck.

Dano69c10 · 04-04-2011, 08:37 PM

No prob! It's gonna be a while before I get to that point on my resto. Just be gentle with the crossmember.

Dano

ironhill · 04-04-2011, 08:48 PM

Hey Dano, when I get it pulled I'll save it for you and I'll keep you posted on it.

Dano69c10 · 04-05-2011, 08:28 AM

Quote:

Originally Posted by ironhill

Hey Dano, when I get it pulled I'll save it for you and I'll keep you posted on it.

Thanx man.
pm sent

ironhill · 04-06-2011, 04:58 PM

new price $80 for the clutch setup

ironhill · 04-14-2011, 08:36 PM

Tranny hump pending
$80 shipped on the rest

03-22-2011, 06:37 PM	#1
ironhill Registered User Join Date: Jan 2009 Location: Great Falls, MT Posts: 335	complete clutch setup and tranny hump Just picked up a 68 that I'm parting out. First thing I don't need is the clutch setup. Complete - pedals, linkage, z-bar, pivot ball for engine block, bracket off the frame for the z-bar, all adjustment linkages to the throwout bearing pivot arm. $100 for complete setup. Also nice tranny hump $40 I'll be pulling the parts off this weekend if the weather holds Last edited by ironhill; 04-02-2011 at 09:02 PM. Reason: addition

03-22-2011, 10:09 PM	#2
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: complete clutch setup I'd like to be first in line for the tranny hump. Could you post some pictures once you get it pulled? Any rust or dents?

03-23-2011, 06:23 PM	#3
ironhill Registered User Join Date: Jan 2009 Location: Great Falls, MT Posts: 335	Re: complete clutch setup mahanian first in line for the tranny hump. I'll get you some pics posted looks like at the latest I'll be doing some disassembly this weekend if not sooner weather depending. It doesn't appear to have any dents or rust.

03-23-2011, 07:17 PM	#4
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: complete clutch setup How much to ship it all to 28327?

03-30-2011, 07:38 PM	#6
ironhill Registered User Join Date: Jan 2009 Location: Great Falls, MT Posts: 335	Re: complete clutch setup Sorry it took so long for pics, it was still snow/raining here all weekend. Attached Images

03-30-2011, 08:24 PM	#7
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: complete clutch setup Thanks for the picture of the hump, could you take one of the right side and bottom as well? How much shipped to 85224?

03-30-2011, 08:34 PM	#8
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: complete clutch setup If you plan to part the entire truck, I'd be interested in the passenger fender shipped to zip 08721 when you get to it. No rush. Thanks, Tony Posted via Mobile Device __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org

03-30-2011, 08:39 PM	#9
ironhill Registered User Join Date: Jan 2009 Location: Great Falls, MT Posts: 335	Re: complete clutch setup [QUOTE=tow guys;4589553]If you plan to part the entire truck, I'd be interested in the passenger fender shipped to zip 08721 when you get to it. No rush. Thanks, Tony Sorry, no fenders on the truck. It had a little fire and about all thats usable is the suspension and chassis parts. Thanks for checking

03-30-2011, 08:54 PM	#10
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: complete clutch setup Thanks anyway. Good luck with the rest of the part out Posted via Mobile Device __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org

04-01-2011, 02:41 PM	#11
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: complete clutch setup Hey Aaron,just want to say i've have not got my AT brake pedal,have you sent it out? Last edited by RCbowtie69; 04-01-2011 at 09:28 PM.

04-01-2011, 03:36 PM	#12
ironhill Registered User Join Date: Jan 2009 Location: Great Falls, MT Posts: 335	Re: complete clutch setup Just checked with my wife to make sure its not still in her car. Said she dropped it off last Thursday. When I get home this evening ill get the tracking number and send it to you. Posted via Mobile Device

04-01-2011, 06:50 PM	#13
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: complete clutch setup Hummm __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

04-01-2011, 07:06 PM	#14
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: complete clutch setup I still want the tranny hump if you could post a picture of the right side and bottom and a shipping quote to zip code 85224 would be great

04-01-2011, 09:29 PM	#15
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: complete clutch setup Thanks,Randy

04-01-2011, 09:49 PM	#16
ironhill Registered User Join Date: Jan 2009 Location: Great Falls, MT Posts: 335	Re: complete clutch setup mahanian - sorry for the wait, the truck is about 30 miles away from me right now and my trailer is still barried in a snow drift. I will be going back out there tomorrow and will bring the hump home and get you more pics and a shipping cost. Randy - pm sent with tracking number Chad - Let me know whats up with your post, tried to pm but your mailbox is full.



Register or Log In To remove these advertisements.

04-01-2011, 11:17 PM	#17
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: complete clutch setup Thanks for the pics.

04-02-2011, 09:02 PM	#18
ironhill Registered User Join Date: Jan 2009 Location: Great Falls, MT Posts: 335	Re: complete clutch setup More pics of the tranny hump mahanian looks like it would be roughly $20 shipping on that Attached Images

04-03-2011, 08:57 AM	#19
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: complete clutch setup If the manual transmission cross-member is available, I'll take it! If it is a true small block V-8 crossmember. (I don't need an L-6 one.) I'll also take the pivot ball/bracket for engine block. Dano __________________ '69 Fleet It ain't yours, if you didn't build it! Last edited by Dano69c10; 04-03-2011 at 09:01 AM.

04-04-2011, 08:37 PM	#21
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: complete clutch setup No prob! It's gonna be a while before I get to that point on my resto. Just be gentle with the crossmember. Dano __________________ '69 Fleet It ain't yours, if you didn't build it!

04-04-2011, 08:48 PM	#22
ironhill Registered User Join Date: Jan 2009 Location: Great Falls, MT Posts: 335	Re: complete clutch setup Hey Dano, when I get it pulled I'll save it for you and I'll keep you posted on it.

04-06-2011, 04:58 PM	#24
ironhill Registered User Join Date: Jan 2009 Location: Great Falls, MT Posts: 335	Re: complete clutch setup new price $80 for the clutch setup

04-14-2011, 08:36 PM	#25
ironhill Registered User Join Date: Jan 2009 Location: Great Falls, MT Posts: 335	Re: complete clutch setup Tranny hump pending $80 shipped on the rest

Register or Log In To remove these advertisements.