Lowering a one ton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tc4x4 · 03-22-2011, 08:38 PM

Is there a kit out there, that can lower a c-35? I hear there are none, can it be done with out chopping. LMC says no to one tons?

cochino12 · 03-22-2011, 09:05 PM

Check western cassis, they sell one ton stuff
Posted via Mobile Device

ratty65 · 03-23-2011, 11:07 AM

Quote:

Originally Posted by cochino12

Check western cassis, they sell one ton stuff
Posted via Mobile Device

How much of a drop is on your ride and how is the ride onit?

cochino12 · 03-23-2011, 08:26 PM

Quote:

Originally Posted by ratty65

How much of a drop is on your ride and how is the ride onit?

6-8.5", rides great. I think the cut coils help
Posted via Mobile Device

ratty65 · 03-24-2011, 11:00 AM

Quote:

Originally Posted by cochino12

6-8.5", rides great. I think the cut coils help
Posted via Mobile Device

Is it a flip on the back or hangers? and leafs?

manimal · 03-22-2011, 10:03 PM

Is it a dually?

tc4x4 · 03-22-2011, 10:24 PM

No its a SRW

Chlsnk · 03-22-2011, 10:58 PM

I think Sport Truck Direct may have a lowering kit.

Leedogg · 03-22-2011, 11:08 PM

Sport truck direct does have a 6/8.5 kit...but I have heard bad things about STD...I am nervous to pull the trigger. I have a thread buried over here where some other alternatives were mentioned....I am going the route Cochino went.

http://www.sporttruckdirect.com/C30_kits.html

1tonchevy · 03-23-2011, 02:23 PM

Quote:

Originally Posted by leedogg

sport truck direct does have a 6/8.5 kit...but i have heard bad things about std...i am nervous to pull the trigger. I have a thread buried over here where some other alternatives were mentioned....i am going the route cochino went.

http://www.sporttruckdirect.com/c30_kits.html

sport truck is no longer in service/ theifs and scam artists.

tc4x4 · 03-23-2011, 03:57 PM

Its a srw regular cab long box one ton. I don't know if i want to drop it, just feeling out my options, its my first 2wd truck, i usually lift them up.

D13 · 03-23-2011, 11:59 AM

i don't usually do this but:

http://porthuron.craigslist.org/cto/2272432091.html

Not mine.
Note this is a dually. front half of the frame is not cleaned up, but rear half looks OK. So at least there is a drop for dually. Looking at this the rear is flip and relocated hangers. So your issue would be spindles. Isn't SRW the same as 3/4 ton?

pig rig · 03-23-2011, 12:34 PM

hey tc4x4 is your truck a crew cab? also if your looking for a srw drop you wont find one because it takes the same spendle as the drw trucks

jitteryguy · 03-23-2011, 12:42 PM

get some 3" spindles, drop shackles and hanger's then remove a few springs if ya need a little more drop.
how low ya try'n to go ?

Chlsnk · 03-23-2011, 06:11 PM

STD has treated me well.

1tonchevy · 03-23-2011, 07:11 PM

Quote:

Originally Posted by Chlsnk

STD has treated me well.

Sent me damaged goods,no customer service, didnt send my whole order, made excuses and than shut the door and closed up shop.

Leedogg · 03-23-2011, 07:31 PM

1ton- I think it was your thread i saw saying such...

1tonchevy · 03-23-2011, 07:40 PM

Quote:

Originally Posted by Leedogg

1ton- I think it was your thread i saw saying such...

yeah most likely. I just don't want anyone else to get screwed. but like i said i'm pretty sure they closed their doors.

I personaly called western and western told me it had been quite a few months since they sent anyhting to STD as they owed them ALOT of money.

03-22-2011, 08:38 PM	#1
tc4x4 Registered User Join Date: Mar 2011 Location: michigan Posts: 223	Lowering a one ton Is there a kit out there, that can lower a c-35? I hear there are none, can it be done with out chopping. LMC says no to one tons?

03-22-2011, 09:05 PM	#2
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	Re: Lowering a one ton Check western cassis, they sell one ton stuff Posted via Mobile Device __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

03-22-2011, 10:03 PM	#6
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: Lowering a one ton Is it a dually? __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

03-22-2011, 10:24 PM	#7
tc4x4 Registered User Join Date: Mar 2011 Location: michigan Posts: 223	Re: Lowering a one ton No its a SRW

03-22-2011, 10:58 PM	#8
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: Lowering a one ton I think Sport Truck Direct may have a lowering kit. __________________ *My 84 short bed build up*** http://67-72chevytrucks.com/vboard/s...68#post3481968

03-22-2011, 11:08 PM	#9
Leedogg Registered User Join Date: Jan 2010 Location: Brewton AL Posts: 236	Re: Lowering a one ton Sport truck direct does have a 6/8.5 kit...but I have heard bad things about STD...I am nervous to pull the trigger. I have a thread buried over here where some other alternatives were mentioned....I am going the route Cochino went. http://www.sporttruckdirect.com/C30_kits.html __________________ 1989 Chevy Crew Cab Dually - 454/400, Trans Am Hauler, Future bagged project. 96 Trans Am: 383/m6 - 11.98@115 on 315 M/T D/R's - 408rwhp 394 rwtq 05 VW Passat TDI - 38mpg @75mph 07 Bandit 1250S - Two wheeled fun! Click here to see my FQuick Garage!

03-23-2011, 03:57 PM	#11
tc4x4 Registered User Join Date: Mar 2011 Location: michigan Posts: 223	Re: Lowering a one ton Its a srw regular cab long box one ton. I don't know if i want to drop it, just feeling out my options, its my first 2wd truck, i usually lift them up.

03-23-2011, 11:59 AM	#12
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Re: Lowering a one ton i don't usually do this but: http://porthuron.craigslist.org/cto/2272432091.html Not mine. Note this is a dually. front half of the frame is not cleaned up, but rear half looks OK. So at least there is a drop for dually. Looking at this the rear is flip and relocated hangers. So your issue would be spindles. Isn't SRW the same as 3/4 ton? __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors

03-23-2011, 12:34 PM	#13
pig rig Registered User Join Date: Feb 2009 Location: washington the state Posts: 730	Re: Lowering a one ton hey tc4x4 is your truck a crew cab? also if your looking for a srw drop you wont find one because it takes the same spendle as the drw trucks __________________ my sports car rolls on six wheels only because I'm to fat to get in and out of new corvette http://hubgarage.s3.amazonaws.com/ph...ped_detail.JPG

03-23-2011, 12:42 PM	#14
jitteryguy GoatLube Experss Join Date: Oct 2009 Location: clarksville, Tn. Posts: 1,337	Re: Lowering a one ton get some 3" spindles, drop shackles and hanger's then remove a few springs if ya need a little more drop. how low ya try'n to go ? __________________ *Goat Lube Express*, locations in Qalat,Afghanistan & Clarksville, Tn. '87 R30 dually 454/TH400 '85 1/2 ton CCSB '92 S10 350/350 '84 MonteCarlo 383/PG/9"ford '78 Malibu wagon 350/350 '78 Cutlass (project family car) '96 S10 Jimmy (Moma's)

03-23-2011, 06:11 PM	#15
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: Lowering a one ton STD has treated me well. __________________ *My 84 short bed build up*** http://67-72chevytrucks.com/vboard/s...68#post3481968

03-23-2011, 07:31 PM	#17
Leedogg Registered User Join Date: Jan 2010 Location: Brewton AL Posts: 236	Re: Lowering a one ton 1ton- I think it was your thread i saw saying such... __________________ 1989 Chevy Crew Cab Dually - 454/400, Trans Am Hauler, Future bagged project. 96 Trans Am: 383/m6 - 11.98@115 on 315 M/T D/R's - 408rwhp 394 rwtq 05 VW Passat TDI - 38mpg @75mph 07 Bandit 1250S - Two wheeled fun! Click here to see my FQuick Garage!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.