TX 1963 SWB frame/rolling chassis - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lilred67 · 03-23-2011, 07:16 AM

i have a straight, complete, short wheel base GMC frame / rolling chassis in good condition. coil springs in front / leaf springs in the rear. $200.00 O.B.O. CASH / bank money order.. please respond to this thread. thanks, Rusty

lilred67 · 04-09-2011, 10:36 AM

offers?

lilred67 · 04-17-2011, 01:09 PM

pics added, motor available together or seperate. see my other thread.

100%Chevy · 04-17-2011, 09:04 PM

I need a set of front engine mounts for my V/6.The steel part bolted to the engine and the rubber mounts.Mine was originally a front/center mount.I want to go to the side mounts.The engines going in a 64.
And a question-Are the towers the same as the v/8 or the I/6 towers?Don't know which I need to use with the v/6.May need yours.
I would like a price and shipping to 39562 on the 2 steel engine parts and rubber mounts.
Thanks,Mike.

lilred67 · 04-17-2011, 10:21 PM

hi Mike, i'll take $50.00.plus shipping,it is around $30. stands,rubbers,engine brackets. the piece that bolts to the engine is large.

i haven't paid that much attention to these stands, if they are the same as the i-6 / v-8 stands on this year truck. they look different on the '68 i have with the v-6.. thanks Rusty

100%Chevy · 04-17-2011, 10:40 PM

Thanks Rusty.
I'll get back to you in a week or so.
Got to make my mind up on some other stuff I'm buying.
Didn't expect to see these come up for sale.
Mike.

lilred67 · 04-17-2011, 11:08 PM

Quote:

Originally Posted by 100%Chevy

Thanks Rusty.
I'll get back to you in a week or so.
Got to make my mind up on some other stuff I'm buying.
Didn't expect to see these come up for sale.
Mike.

i re-read your post!! i priced it with stands, you wanted it without. cheaper price / shipping without stands, let me know.....Rusty.

100%Chevy · 04-20-2011, 01:34 PM

Rusty,I'd like to buy the parts.
What you originally quoted me for the 6 pieces.The 2 steel parts that bolt to the engine,the 2 rubber mounts and the 2 stands or towers.Total$50.00 +$30.00 shipping.
I've determined I do need the 305 stands!
Also,what will you take for the engine fan?
I can send a postal money order when we work out the deal.
I need your info by p.m. or e-mail.
Thanks,Mike.

lilred67 · 04-20-2011, 08:39 PM

PM sent to 100%chevy

100%Chevy · 04-20-2011, 09:21 PM

Got it!
Mike.

100%Chevy · 04-21-2011, 07:14 PM

Rusty,I put the check in the mail about 9:00 this morning.
Mike.

lilred67 · 04-21-2011, 10:23 PM

Quote:

Originally Posted by 100%Chevy

Rusty,I put the check in the mail about 9:00 this morning.
Mike.

thanks..

100%Chevy · 04-29-2011, 10:52 PM

Rusty,I got the parts I bought from you today.
Everything was exactly as described and fit perfectly!
Also,thanks for sending the parts I forgot to ask for but you knew I needed.
To everyone else,I've bought from Rusty before and won't hesitate to do it again.I feel I always get the better part of the deal!
Again,thank you Rusty!
Mike.

lilred67 · 06-11-2011, 03:20 PM

ttt

lilred67 · 07-04-2011, 08:27 AM

ttt

CVA59 · 07-05-2011, 10:25 AM

I'll take the rolling frame.
Posted via Mobile Device

lilred67 · 07-05-2011, 06:26 PM

Quote:

Originally Posted by CVA59

I'll take the rolling frame.
Posted via Mobile Device

frame sold to CVA59 pending payment.....thanks

lilred67 · 07-08-2011, 11:25 PM

Quote:

Originally Posted by lilred67

frame sold to CVA59 pending payment.....thanks

payment recieved...thanks

03-23-2011, 07:16 AM	#1
lilred67 Senior Member Join Date: Mar 2005 Location: weatherford,texas Posts: 1,003	1963 SWB frame/rolling chassis i have a straight, complete, short wheel base GMC frame / rolling chassis in good condition. coil springs in front / leaf springs in the rear. $200.00 O.B.O. CASH / bank money order.. please respond to this thread. thanks, Rusty Last edited by lilred67; 07-04-2011 at 08:27 AM. Reason: new price

04-09-2011, 10:36 AM	#2
lilred67 Senior Member Join Date: Mar 2005 Location: weatherford,texas Posts: 1,003	Re: 1963 SWB frame/rolling chassis offers?

04-17-2011, 01:09 PM	#3
lilred67 Senior Member Join Date: Mar 2005 Location: weatherford,texas Posts: 1,003	Re: 1963 SWB frame/rolling chassis pics added, motor available together or seperate. see my other thread. Attached Images

04-17-2011, 09:04 PM	#4
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: 1963 SWB frame/rolling chassis I need a set of front engine mounts for my V/6.The steel part bolted to the engine and the rubber mounts.Mine was originally a front/center mount.I want to go to the side mounts.The engines going in a 64. And a question-Are the towers the same as the v/8 or the I/6 towers?Don't know which I need to use with the v/6.May need yours. I would like a price and shipping to 39562 on the 2 steel engine parts and rubber mounts. Thanks,Mike.

04-17-2011, 10:21 PM	#5
lilred67 Senior Member Join Date: Mar 2005 Location: weatherford,texas Posts: 1,003	Re: 1963 SWB frame/rolling chassis hi Mike, i'll take $50.00.plus shipping,it is around $30. stands,rubbers,engine brackets. the piece that bolts to the engine is large. i haven't paid that much attention to these stands, if they are the same as the i-6 / v-8 stands on this year truck. they look different on the '68 i have with the v-6.. thanks Rusty

04-17-2011, 10:40 PM	#6
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: 1963 SWB frame/rolling chassis Thanks Rusty. I'll get back to you in a week or so. Got to make my mind up on some other stuff I'm buying. Didn't expect to see these come up for sale. Mike.

04-20-2011, 01:34 PM	#8
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: 1963 SWB frame/rolling chassis Rusty,I'd like to buy the parts. What you originally quoted me for the 6 pieces.The 2 steel parts that bolt to the engine,the 2 rubber mounts and the 2 stands or towers.Total$50.00 +$30.00 shipping. I've determined I do need the 305 stands! Also,what will you take for the engine fan? I can send a postal money order when we work out the deal. I need your info by p.m. or e-mail. Thanks,Mike.

04-20-2011, 08:39 PM	#9
lilred67 Senior Member Join Date: Mar 2005 Location: weatherford,texas Posts: 1,003	Re: 1963 SWB frame/rolling chassis PM sent to 100%chevy

04-20-2011, 09:21 PM	#10
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: 1963 SWB frame/rolling chassis Got it! Mike.

04-21-2011, 07:14 PM	#11
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: 1963 SWB frame/rolling chassis Rusty,I put the check in the mail about 9:00 this morning. Mike.

04-29-2011, 10:52 PM	#13
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: 1963 SWB frame/rolling chassis Rusty,I got the parts I bought from you today. Everything was exactly as described and fit perfectly! Also,thanks for sending the parts I forgot to ask for but you knew I needed. To everyone else,I've bought from Rusty before and won't hesitate to do it again.I feel I always get the better part of the deal! Again,thank you Rusty! Mike.

06-11-2011, 03:20 PM	#14
lilred67 Senior Member Join Date: Mar 2005 Location: weatherford,texas Posts: 1,003	Re: 1963 SWB frame/rolling chassis ttt

07-04-2011, 08:27 AM	#15
lilred67 Senior Member Join Date: Mar 2005 Location: weatherford,texas Posts: 1,003	Re: 1963 SWB frame/rolling chassis ttt

07-05-2011, 10:25 AM	#16
CVA59 Registered User Join Date: Nov 2009 Location: Longview, Texas Posts: 775	Re: 1963 SWB frame/rolling chassis I'll take the rolling frame. Posted via Mobile Device __________________ Zack www.23t.weebly.com _________________________________



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.